Eberle KLR-E 7015 Thermostat User Manual

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your Eberle KLR-E 7015 Thermostat. This device is designed for controlling fan coil units, offering manual temperature regulation and 3-speed fan control. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Informazioni sulla sicurezza

AVVERTIMENTO: Electrical shock hazard. Installation and wiring must be performed by a qualified electrician in accordance with all local and national electrical codes.

• Always disconnect power at the main circuit breaker before installing or servicing the thermostat.
• Non azionare il termostato con le mani bagnate.
• Assicurarsi che tutti i collegamenti siano sicuri e adeguatamente isolati.
• Questo termostato è progettato esclusivamente per l'uso in ambienti interni.
• Tenere fuori dalla portata dei bambini.

3. Caratteristiche del prodotto

• Manual temperature control via rotary dial.
• 3-speed fan control for optimal comfort.
• Bimetal temperature sensing technology.
• Heating and cooling mode selection.
• Wired connectivity for reliable operation.
• Wall-mounted design.

4. Contenuto della confezione

Verificare che tutti gli articoli siano presenti nel pacco:

• Eberle KLR-E 7015 Thermostat
• Electrical cable (for installation)
• Mounting screws and anchors (may vary by region)
• Questo manuale utente

5. Specifiche

This image displays the white Eberle KLR-E 7015 thermostat, showing its front face with the Eberle logo, fan speed switch, mode switch (heating/cooling), and a rotary temperature dial marked in Celsius. The overall dimensions are indicated as 11.71 cm in length, 7.11 cm in height, and 2.69 cm in depth.

6. Installazione e configurazione

IMPORTANTE: Installation must be carried out by a qualified professional. Incorrect wiring can cause damage to the thermostat, the fan coil unit, or pose an electrical hazard.

1. Disconnessione dell'alimentazione: Before starting any work, ensure the main power supply to the fan coil unit and the thermostat installation area is completely disconnected at the circuit breaker.
2. Posizione di montaggio: Choose an indoor wall location away from direct sunlight, drafts, or heat sources that could affect temperature readings. The recommended mounting height is approximately 1.5 meters (5 feet) from the floor.
3. Montaggio del termostato:
   • Carefully separate the front cover from the base plate of the thermostat.
   • Mark the drilling points on the wall using the base plate as a template.
   • Se necessario, praticare dei fori e inserire i tasselli a muro.
   • Fissare la piastra di base alla parete utilizzando le viti fornite.
4. Cablaggio:
   • Connect the electrical cables from the fan coil unit and power supply to the appropriate terminals on the thermostat's base plate. Refer to the wiring diagram provided with the product packaging for specific connections.
   • Ensure all wire connections are tight and correctly matched (e.g., Live, Neutral, Fan Speeds, Valve Control).
5. Rimontaggio: Once wiring is complete and verified, carefully reattach the front cover to the base plate.
6. Ripristino dell'energia: Restore power at the main circuit breaker. The thermostat should now be ready for operation.

7. Funzionamento

The Eberle KLR-E 7015 thermostat features intuitive manual controls:

• Temperature Setting Dial:

  Rotate the large circular dial to set your desired room temperature. The dial is marked in degrees Celsius (°C). The thermostat will maintain the set temperature by controlling the fan coil unit's heating or cooling functions.

• Interruttore di selezione della modalità:

  Use the horizontal slide switch (often marked with a snowflake for cooling and wavy lines for heating) to select between heating and cooling modes, or an off position if available.

• Interruttore di velocità della ventola:

  The vertical slide switch (often marked with fan icons) allows you to select the desired fan speed: Low, Medium, or High. Some models may also include an 'Auto' setting where the fan speed adjusts automatically based on temperature demand.

8. Manutenzione

The Eberle KLR-E 7015 thermostat requires minimal maintenance to ensure optimal performance.

• Pulizia: Pulire periodicamente l'esterno del termostato con un panno morbido e asciutto.amp panno. Non utilizzare detergenti abrasivi, solventi o spray detergenti direttamente sull'unità.
• Nessuna parte riparabile dall'utente: Il termostato non contiene parti riparabili dall'utente. Non tentare di aprire o riparare l'unità autonomamente. Per qualsiasi intervento di manutenzione, rivolgersi a personale qualificato.
• Liquidazione: Ensure that no objects obstruct the airflow around the thermostat, as this can affect its temperature sensing accuracy.

9. Risoluzione Dei Problemi

Se riscontri problemi con il termostato, fai riferimento ai seguenti passaggi comuni per la risoluzione dei problemi:

For problems not listed here or if solutions do not resolve the issue, please contact qualified service personnel.

10. Garanzia e supporto

Eberle products are manufactured to high-quality standards and are backed by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Eberle websito per termini e condizioni di garanzia dettagliati.

For technical support, spare parts, or service inquiries, please contact your local Eberle distributor or the customer support department. Keep your model number (KLR-E 7015) and purchase information ready when contacting support.

Note: Software updates are not applicable for this analog bimetal thermostat.