Manuale di istruzioni per il supporto da parete per TV Invision Ultra Slim Tilt Swivel (HDTV-E)

Introduzione

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E). Please read all instructions carefully before beginning installation to ensure correct assembly and to prevent damage or injury. Keep this manual for future reference.

Contenuto della confezione:

• Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount
• Kit di montaggio (viti, tasselli, rondelle varie)
• High Speed HDMI Cable (1080p 1.4v)
• 6-inch Tri-axis Spirit Level
• Manuale di istruzioni

Figura 1: Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) components, including the main mount assembly, VESA plate, and accessories like the spirit level and HDMI cable.

Informazioni importanti sulla sicurezza

WARNING: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty.

• Do not install this product on walls that are not structurally sound. Ensure the mounting surface can support the combined weight of the mount and your television.
• Always use a stud finder to locate wood studs or ensure you are mounting into solid concrete/brick.
• Non superare la capacità di carico massima di 36.2 kg (80 libbre).
• Questo prodotto è progettato esclusivamente per uso interno.
• Assicurarsi che tutte le viti siano ben serrate, ma non eccessivamente.
• Tenere lontani bambini e animali domestici durante l'installazione.
• In caso di dubbi su qualsiasi fase del processo di installazione, consultare un professionista qualificato.

Specifiche

Figura 2: Key specifications of the Invision HDTV-E mount, including load capacity (36.2kg), minimum wall profile (55mm), and maximum extension (500mm).

Configurazione e installazione

1. Elenco di controllo pre-installazione

• Verify VESA Compatibility: Check the back of your TV for four mounting holes. Measure the horizontal and vertical distance between these holes. This mount supports VESA patterns from 100x100mm to 400x400mm. Note: Not suitable for 75x75mm VESA.
• Tipo di parete: Determine if your wall is wood stud, solid concrete, or brick. Different mounting hardware is required.
• Strumenti necessari: Pencil, drill, stud finder (for wood studs), level (included), measuring tape, socket wrench, screwdriver.
• Controllo del peso: Ensure your TV's weight does not exceed 36.2kg (80lbs).

Figura 3: Guide to checking VESA compatibility. Measure the distance between mounting holes to determine your TV's VESA pattern. The image illustrates how to measure width and height for VESA standards.

2. Attaching the TV Brackets to Your Television

1. Posizionare con cautela il televisore a faccia in giù su una superficie morbida e pulita per evitare di danneggiare lo schermo.
2. Identify the correct screws (M4, M6, or M8) from the hardware kit that fit your TV's mounting holes. Use washers if necessary.
3. Attach the two vertical TV brackets to the back of your television using the selected screws. Ensure they are securely fastened but do not overtighten. The brackets should be centered horizontally on the TV.

3. Montaggio della piastra a parete alla parete

1. Determinare l'altezza di montaggio: Decide on the desired height for the top of your TV. Mark this on the wall.
2. Individuare i montanti (per pareti con montanti in legno): Use a stud finder to locate the center of two adjacent wood studs. Mark these locations.
3. Posizione piastra a muro: Hold the wall plate against the wall at the desired height, aligning it with the marked stud centers. Use the included spirit level to ensure it is perfectly horizontal. Mark the drill holes.
4. Praticare i fori pilota:
   • For wood studs: Drill pilot holes using a 5.5mm (7/32 inch) drill bit to a depth of 60mm (2.36 inches).
   • For solid concrete/brick: Drill pilot holes using a 10mm (3/8 inch) drill bit to a depth of 70mm (2.75 inches). Insert concrete anchors into the holes.
5. Piastra di sicurezza a muro: Attach the wall plate to the wall using the lag bolts and washers provided. Tighten all bolts firmly.

4. Appendere la televisione

1. Con l'aiuto di qualcuno, sollevare con cautela il televisore utilizzando le staffe in dotazione.
2. Agganciare le staffe del televisore alla piastra a muro. Assicurarsi che il televisore sia saldamente fissato alla piastra a muro.
3. Engage the safety locking screws or mechanisms on the bottom of the TV brackets to prevent accidental dislodging.

Istruzioni per l'uso

The Invision HDTV-E mount offers flexible viewing options with its tilt and swivel capabilities.

Figura 4: The mount's design allows for extensive swivel and tilt adjustments, providing optimal viewangoli di ripresa da varie posizioni in una stanza.

Regolazione girevole

Gently grasp the sides of your television and carefully pull it away from the wall. You can then pivot the TV left or right to achieve your desired viewing angle. The mount allows for a wide range of swivel motion, up to 500mm (19.7 inches) extension from the wall.

Regolazione dell'inclinazione

To adjust the vertical tilt, gently push the top or bottom of the television forward or backward. The mount supports a tilt angle of 5 to 8 degrees. The lockable tilt mechanism ensures the TV stays at your chosen angle.

Gestione dei cavi

The mount features integrated cable management covers on the arms. Route your cables (including the included HDMI cable) through these covers to keep them organized and out of sight, ensuring a clean installation.

Figura 5: Dettagliato view of the mount's cable management system and the lockable tilt mechanism, designed for a tidy and secure setup.

Manutenzione

• Ispezione regolare: Periodically check all mounting screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can cause them to loosen slightly.
• Pulizia: Pulisci la montatura con un panno morbido e asciutto. Evita detergenti abrasivi o solventi che potrebbero danneggiare la finitura.
• Lubrificazione: Le parti mobili del supporto sono progettate per un funzionamento fluido e generalmente non richiedono lubrificazione. Se si nota qualsiasi rigidità, contattare l'assistenza clienti.
• Limite di peso: Never exceed the maximum weight capacity of 36.2kg (80lbs).

Risoluzione dei problemi

Informazioni sulla garanzia

The Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) comes with a Garanzia del prodotto di 25 anni. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

For warranty claims or further details, please contact Invision customer support.

Assistenza clienti

If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Invision Technology (UK) Ltd. customer support.

Produttore: Invision Technology (UK) Ltd

Numero di identificazione commerciale globale (GTIN): 05060264551392

Please refer to the product packaging or the official Invision websito per le informazioni di contatto più aggiornate.

Figura 6: Product packaging displaying manufacturer information and contact details for Invision Technology (UK) Ltd.