1. Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of the GeoVision GV-MFD2501-6F 2MP Mini Fixed Dome IP Security Camera. Please read this manual thoroughly before using the product to ensure proper setup and functionality. Keep this manual for future reference.
1.1 Prodotto finitoview
The GV-MFD2501-6F is a compact 2-megapixel mini fixed dome IP camera designed for various surveillance applications. It features a 2.3mm lens, super low lux capabilities, and supports network connectivity for remote monitoring.
Figure 1.1: GeoVision GV-MFD2501-6F Mini Fixed Dome IP Security Camera. This image shows the compact design of the camera, highlighting its dome shape and lens.
1.2 Contenuto della confezione
Verificare che tutti gli articoli siano presenti nella confezione. Se qualche articolo risulta mancante o danneggiato, contattare immediatamente il rivenditore.
- GV-MFD2501-6F IP Camera
- Kit viti di montaggio
- Guida all'installazione
- CD del software (o link per il download)
- Connettore impermeabile (se applicabile)
2. Informazioni sulla sicurezza
WARNING: To prevent fire or shock hazard, do not expose this unit to rain or moisture.
- Utilizzare solo l'adattatore di alimentazione specificato per questo dispositivo.
- Do not open the camera housing. Refer all servicing to qualified personnel.
- Avoid placing the camera in direct sunlight, near heat sources, or in areas with high humidity or dust.
- Garantire una ventilazione adeguata intorno alla telecamera.
- Scollegare l'alimentazione prima di effettuare la pulizia o la manutenzione.
3. Impostazione
3.1 Installazione fisica
The GV-MFD2501-6F is designed for indoor use. Choose a suitable mounting location that provides the desired field of view and is within reach of network and power cables.
- Preparare la superficie di montaggio: Utilizzare la dima di montaggio fornita (se inclusa) per contrassegnare i fori da praticare.
- Fori di perforazione: Praticare dei fori pilota per le viti di montaggio.
- Fissare la fotocamera: Fissare la base della telecamera alla superficie di montaggio utilizzando le viti fornite.
- Regola l'angolo: Loosen the adjustment screws to position the camera lens for the desired viewing angle, then tighten the screws to secure it.
Figure 3.1: Illustrative diagram of camera mounting. This image would typically show the steps for securing the camera to a ceiling or wall, including screw placement and cable routing.
3.2 Cablaggio e collegamenti
Connect the camera to your network and power source.
- Cavo Ethernet: Connect an Ethernet cable from your network switch or router to the camera's RJ-45 port. If using Power over Ethernet (PoE), this single cable provides both power and data.
- Power Adapter (if not using PoE): If PoE is not available, connect a compatible 12V DC power adapter (not included) to the camera's power input port.
Figure 3.2: Diagram showing camera wiring connections. This image would illustrate how to connect the Ethernet cable and, if necessary, the power adapter to the camera's ports.
3.3 Configurazione iniziale della rete
After physical installation and connection, configure the camera for network access.
- Accensione: Connect the camera to power. The camera will perform a self-test.
- Scopri la fotocamera: Use the GeoVision GV-IP Device Utility (available on the GeoVision website) to discover the camera on your local network. The utility will display the camera's IP address.
- Accesso Web Interfaccia: Aprire un web browser (e.g., Chrome, Firefox) and enter the camera's IP address in the address bar.
- Login: Enter the default username (e.g., "admin") and password (e.g., "admin" or "1234"). You will be prompted to change the password upon first login for security.
- Impostazioni di rete: Navigate to the network settings to configure IP address (DHCP or Static), subnet mask, gateway, and DNS settings as required by your network environment.
4. Istruzioni per l'uso
Once configured, the camera can be accessed and managed through its web interface or compatible GeoVision VMS software.
4.1 Vivere View
Dal web interfaccia, vai a "Live View" section to see the real-time video feed from the camera. You can adjust video stream settings such as resolution, frame rate, and quality here.
4.2 Impostazioni di registrazione
Configure recording schedules, motion detection recording, and continuous recording options. Recordings can be stored on a network-attached storage (NAS), local storage (if supported), or a GeoVision NVR/VMS.
4.3 Rilevamento del movimento
Set up motion detection zones and sensitivity levels. When motion is detected, the camera can trigger recording, send email alerts, or activate other alarm outputs.
4.4 Accesso remoto
To access the camera remotely, ensure your network router is configured for port forwarding (if not using a VPN or cloud service). Refer to your router's manual for port forwarding instructions. GeoVision also offers mobile applications for remote viewing.
5. Manutenzione
5.1 Pulizia della fotocamera
Pulire regolarmente l'obiettivo e l'alloggiamento della fotocamera per garantire una qualità d'immagine ottimale. Utilizzare un panno morbido e asciutto. Per lo sporco ostinato, utilizzare un panno leggermenteamp cloth with mild detergent can be used, followed by a dry cloth. Do not use abrasive cleaners or solvents.
5.2 Aggiornamenti firmware
Periodically check the GeoVision webSito per gli aggiornamenti del firmware. Gli aggiornamenti del firmware possono offrire nuove funzionalità, miglioramenti delle prestazioni e della sicurezza. Seguire attentamente le istruzioni fornite con il pacchetto di aggiornamento del firmware.
5.3 Gestione delle password
Regularly change your camera's password to a strong, unique password to prevent unauthorized access.
6. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessuna alimentazione alla telecamera | Power adapter unplugged or faulty; PoE not active. | Check power connections. Ensure PoE switch/injector is active. Test with a known good power source. |
| Nessun feed video | Network cable disconnected; incorrect IP address; firewall blocking access. | Verify Ethernet cable connection. Use GV-IP Device Utility to find camera. Check network settings and firewall rules. |
| Non riesci ad accedere | Incorrect username/password. | Ensure correct credentials. If forgotten, refer to the GeoVision website for password reset procedures (may require physical access). |
| Scarsa qualità dell'immagine | Dirty lens; improper focus; low light conditions; incorrect video settings. | Clean the lens. Adjust focus if applicable. Ensure adequate lighting. Check resolution, frame rate, and compression settings. |
7. Specifiche
The following are key specifications for the GeoVision GV-MFD2501-6F camera:
- Modello: 84-MFD2501-6F1U
- Risoluzione: 2 Megapixel
- Lente: Obiettivo fisso 2.3mm
- Connettività: Senza fili Note: While "Wireless" is listed in specifications, this IP camera primarily uses wired Ethernet for reliable data transmission and PoE. Wireless functionality may refer to specific optional modules or control methods.
- Energia: PoE (Power over Ethernet) o 12 V CC (adattatore non incluso)
- Dimensioni: Circa 21 x 18.6 x 9.3 cm (dimensioni del pacco)
- Peso: Circa 487 g (peso del pacco)
- Temperatura di esercizio: (Information not provided, typical range is -10°C to 50°C)
- Produttore: GeoVision
8. Garanzia e supporto
8.1 Informazioni sulla garanzia
GeoVision products typically come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official GeoVision websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.
8.2 Supporto tecnico
For technical assistance, product inquiries, or troubleshooting beyond this manual, please contact GeoVision customer support or your authorized GeoVision dealer. Visit the official GeoVision webposto (www.geovision.com.tw) for support resources, FAQs, and contact information.