Aetertek AT-919C-1 Remote Dog Training Collar User Manual

1. Introduzione

Thank you for choosing the Aetertek AT-919C-1 Remote Dog Training Collar. This manual provides essential information for the safe and effective use of your new training system. This system is designed to assist in training and behavior modification for medium to large dogs, offering remote control over sound, vibration, and static correction modes, along with an automatic anti-bark function. Please read this manual thoroughly before operating the device.

Image 1.1: Aetertek AT-919C-1 Remote Dog Training Collar components.

2. Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:

• Trasmettitore remoto 1 x
• 1 x Receiver Collar (for 1-Dog Kit)
• 1 x Adjustable Collar Strap
• 1 x Dual-Head Charging Cable
• 1 x set di punte di contatto lunghe
• 1 x set di punti di contatto corti
• 1 x strumento di prova della luce
• 1 x Manuale utente (questo documento)

Image 2.1: All components included in the 1-Dog Kit.

3. Prodotto finitoview

3.1 Trasmettitore remoto

• Schermo LCD: Shows battery level, intensity level, and selected dog.
• Pulsanti modalità: Separate buttons for Sound, Vibration, and Static Correction.
• Regolazione dell'intensità: Buttons to increase or decrease correction levels.
• Pulsante di selezione del cane: Switch between Dog 1 and Dog 2 (if using a 2-dog system).
• Magnetic Induction Power Switch: For turning the remote on/off.
• Clip da cintura: Per un trasporto comodo.

Image 3.1: Remote Transmitter layout.

3.2 Collare ricevitore

• Punti di contatto: Deliver static correction and vibration. Choose long or short based on dog's coat.
• Magnetic Induction Power Switch: For turning the receiver on/off.
• Porta di ricarica: For recharging the receiver battery.
• Design impermeabile: 100% waterproof and submersible.

Image 3.2: Receiver Collar with magnetic induction power switch.

Image 3.3: Remote and Receiver Collar connection points.

4. Impostazione

4.1 Ricarica dei dispositivi

1. Connect the dual-head charging cable to both the Remote Transmitter and the Receiver Collar.
2. Collegare l'estremità USB del cavo a un adattatore di alimentazione USB standard (non incluso) o a una porta USB del computer.
3. Allow both devices to charge fully before first use. The indicator lights will change to show charging status (refer to specific light indicators in the full manual for details).

Image 4.1: Receiver Collar charging port.

4.2 Fissaggio dei punti di contatto

Select the appropriate length of contact points (long or short) based on your dog's coat thickness. The contact points must make direct contact with your dog's skin for effective correction.

• For dogs with short coats, use the shorter contact points.
• For dogs with thick or long coats, use the longer contact points.

4.3 Accensione/spegnimento e associazione

1. To power on the Remote Transmitter and Receiver Collar, hold the magnetic induction power switch on each device until the indicator light illuminates.
2. To power off, repeat the process until the indicator light turns off.
3. The devices are typically pre-paired. If re-pairing is needed (e.g., after a full discharge or adding a second collar), follow the specific pairing instructions in the full manual. Generally, this involves holding a button on the receiver while the remote is in pairing mode.

5. Modalità operative

The Aetertek AT-919C-1 offers three distinct training modes: Sound, Vibration, and Static Correction. These can be used independently or in combination to achieve desired training outcomes.

5.1 Sound (Beep) Mode

• Use the dedicated Sound button on the remote.
• There are 10 adjustable beep sound levels. Start with a low level and increase as needed.
• Ideal for issuing warnings, calling your dog, or reinforcing positive behavior.

5.2 Modalità vibrazione

• Activate using the dedicated Vibration button on the remote.
• This mode offers 1 strong and humane vibration level.
• Effective for gaining your dog's attention or as a stronger warning than the sound mode.

5.3 Static Correction (Shock) Mode

• Engage with the dedicated Static Correction button on the remote.
• Features 10 levels of progressive static correction, adjusting both intensity and duration.
• Always start at the lowest level and gradually increase only if necessary. Use this mode for serious behavior issues that other modes have not corrected.

5.4 Automatic Anti-Bark Function

• The receiver collar includes an automatic anti-bark feature.
• This function can be switched ON or OFF as desired. Refer to the full manual for specific instructions on activating/deactivating this feature.

5.5 Dog Selection

If you have purchased a 2-Dog Kit or an additional receiver collar, you can switch between controlling Dog 1 and Dog 2 using the dedicated dog selection button on the remote transmitter.

6. Montaggio del collare

Proper fit of the receiver collar is crucial for its effectiveness and your dog's comfort and safety.

1. Position the receiver on the center of your dog's neck, directly under the chin.
2. Ensure the contact points are touching your dog's skin. You may need to part thick fur to ensure good contact.
3. The collar should be snug, but not too tight. You should be able to fit two fingers snugly between the collar strap and your dog's neck.
4. Evitare di tenere il collare indossato per più di 12 ore al giorno per prevenire irritazioni cutanee.

7. Suggerimenti per l'allenamento

Effective training requires consistency, patience, and positive reinforcement. The Aetertek training collar is a tool to aid in this process, not a substitute for proper training techniques.

• Start with Basic Commands: Ensure your dog understands basic commands like 'sit', 'stay', and 'come' before introducing the collar for correction.
• Rinforzo positivo: Always reward desired behaviors with praise, treats, or affection.
• La coerenza è la chiave: Use the collar consistently for specific behaviors you want to correct.
• Low Levels First: Always begin with the lowest effective correction level and only increase if necessary.
• Brevi sessioni di allenamento: Per mantenere il coinvolgimento del tuo cane, le sessioni di addestramento devono essere brevi e positive.

Immagine 7.1: Es.amples of well-behaved dogs after training.

Video 7.1: Dog Training Collar with 3 Training Modes. This video demonstrates the use of a dog training collar with sound, vibration, and static correction modes, showing how to adjust levels and apply corrections for effective training.

8. Manutenzione

• Pulizia: Pulire regolarmente il collare del ricevitore e i punti di contatto con un adamp panno. Assicurarsi che tutti i componenti siano asciutti prima di riporli o di utilizzarli nuovamente.
• Controllo della pelle: Inspect your dog's neck daily for any signs of irritation or sores from the contact points. If irritation occurs, discontinue use until the skin heals.
• Cura della batteria: Fully charge the devices when not in use for extended periods to prolong battery life.

9. Risoluzione Dei Problemi

• Nessun potere: Ensure both the remote and receiver are fully charged. Check the charging cable and adapter.
• No Correction: Verify the receiver is powered on and the contact points are making proper skin contact. Increase the intensity level gradually.
• Il telecomando non controlla il ricevitore: Re-pair the remote and receiver according to the full manual's instructions. Ensure they are within the specified range.
• Dog Not Responding: Check the collar fit and ensure the correction level is appropriate for your dog's temperament and the situation. Re-evaluate training methods.

10. Specifiche

• Numero modello: AT-919C-1
• Marca: Aetertek
• Peso dell'articolo: 1.06 libbre
• Allineare: Fino a 1100 iarde (circa 1000 metri)
• Impermeabile: 100% Waterproof and Submersible Receiver Collar
• Tipo di batteria: Polimero di litio (incluso)
• Modalità di allenamento: Sound (Beep), Vibration, Static Correction
• Livelli di shock: 10 progressive levels (intensity and duration adjustable)
• Livelli di vibrazione: 1 level (strong and humane)
• Beep Levels: 10 livelli regolabili
• Auto Anti-Bark: Yes (ON/OFF switchable)
• Materiale: Metal, Polyurethane
• Pubblico di destinazione: Cani di taglia medio-grande

11. Garanzia e supporto

For warranty information, technical support, or any questions regarding your Aetertek AT-919C-1 Remote Dog Training Collar, please refer to the contact information provided in your product packaging or visit the official Aetertek websito. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.