PDP Afterglow Wireless Controller for PS3

Introduzione

Thank you for choosing the PDP Afterglow Wireless Controller. This controller is designed to enhance your gaming experience on the PlayStation 3 and is also compatible with Windows 7 and up on PC. It features a distinctive clear polycarbonate housing with signature Afterglow blue lighting, custom-engineered SmartTrack technology for precise analog stick control, and upgraded L1/R1 and L2/R2 buttons with swappable functions. This manual provides essential information for setting up, operating, and maintaining your controller.

Immagine: Frontale view of the PDP Afterglow Wireless Controller, showcasing its clear blue illuminated design.

Contenuto della confezione

Si prega di controllare il contenuto della confezione per assicurarsi che siano presenti tutti gli articoli:

• 1 x PDP Afterglow Wireless Controller
• 1 x USB Wireless Receiver Dongle
• 1 x Manuale di istruzioni (questo documento)

Nota: Per il funzionamento sono necessarie 2 batterie AA, non incluse nella confezione.

Impostare

1. Installa le batterie: Open the battery compartment on the back of the controller. Insert two (2) AA batteries, ensuring correct polarity (+/-). Close the battery compartment securely.
2. Collegare il ricevitore wireless USB:
   • Per PlayStation 3: Plug the USB wireless receiver dongle into an available USB port on your PlayStation 3 console.
   • Per PC: Plug the USB wireless receiver dongle into an available USB port on your PC. Ensure your PC is running Windows 7 or a newer version.
3. Associazione del controller:

   Once the USB receiver is connected, turn on your controller. The controller should automatically pair with the receiver. The blue LED lights on the controller will indicate a successful connection. If the controller does not connect automatically, ensure the receiver is properly inserted and the controller has fresh batteries. You may need to briefly remove and re-insert the USB receiver.

Image: Illustration demonstrating how to connect the USB wireless receiver to a PlayStation 3 console or PC.

Istruzioni per l'uso

Layout del controller

Image: Detailed diagram illustrating the button layout and labels of the PDP Afterglow Wireless Controller.

• Levetta sinistra / Levetta destra: Per il controllo del movimento e della telecamera.
• Pad direzionale: Per un input direzionale preciso.
• Face Buttons (Triangle, Circle, Cross, Square): Pulsanti di azione standard.
• Left Bumper (L1) / Right Bumper (R1): Bottoni sulle spalle.
• Left Trigger (L2) / Right Trigger (R2): Trigger analogici per input variabili.
• Select / Start Buttons: Game-specific functions.
• Pulsante Home: Access the PlayStation 3 XMB menu or PC game menu.

Afterglow Button Functionality

The Afterglow button, located on the back of the controller, allows you to swap the functions of the L1/R1 and L2/R2 buttons. To activate this feature, press and hold the Afterglow button. This can be useful for customizing your control scheme based on game preferences.

Controllo dell'illuminazione a LED

The signature blue LED lighting can be toggled on or off. To control the lighting, locate the dedicated button on the back of the controller. Pressing this button will cycle the LED lights between on and off states.

Gestione dell'alimentazione

To conserve battery life, the controller is designed to automatically shut down after approximately 2 minutes of inactivity. To reactivate the controller, press any button. The controller cannot be used to power on the PlayStation 3 console; the console must be turned on manually.

Note sulla compatibilità

This controller is specifically designed for PlayStation 3 games and PC games (Windows 7 and up). It is not compatible with PlayStation 2 games, even if played on a backwards-compatible PlayStation 3 console.

Manutenzione

• Sostituzione della batteria: Replace AA batteries when the controller's performance diminishes or the LED lights dim. Always use fresh batteries and dispose of old batteries responsibly.
• Pulizia: Per pulire il controller, utilizzare un panno morbido e asciutto. Per lo sporco ostinato, utilizzare un panno leggermente damp cloth can be used, but ensure no moisture enters the controller's internal components. Avoid using harsh chemicals or abrasive cleaners.
• Magazzinaggio: Quando non viene utilizzato per lunghi periodi, conservare il controller in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.

Risoluzione dei problemi

Il controller non si accende:

Ensure fresh AA batteries are correctly installed with proper polarity. Check the battery compartment for any obstructions.

Controller does not connect or pair:

• Verify the USB wireless receiver dongle is securely plugged into an active USB port on your console or PC.
• Try unplugging and re-plugging the USB receiver.
• Assicurarsi che il controller abbia batterie nuove.
• Move the controller closer to the USB receiver to rule out range issues.

Buttons or analog sticks are unresponsive or sticking:

Ensure the controller is clean and free from debris around the buttons and sticks. Avoid excessive force during use. If the issue persists, contact customer support.

LED lights are not illuminating:

Check if the LED lighting feature has been toggled off using the dedicated button on the back of the controller. Ensure batteries are not depleted.

Controller does not turn on the PlayStation 3 console:

This is expected behavior. The PlayStation 3 console must be powered on manually.

Controller does not work with PlayStation 2 games:

This controller is not designed for PlayStation 2 games. It is compatible with PlayStation 3 and PC (Windows 7 and up) titles only.

Specifiche

Image: The PDP Afterglow Wireless Controller with its key dimensions (length, width, height) indicated.

Garanzia e supporto

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official PDP websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.

Supporto online: Visita lo Store PDP su Amazon