EONON A0119

Eonon A0119 Backup Camera User Manual

Model: A0119 | Brand: EONON

Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your Eonon A0119 backup camera. Designed for enhanced rear visibility, this waterproof camera features a 170° wide-angle lens and high-definition imaging to assist with safe reversing and parking. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

Guida all'installazione

Follow these steps to correctly install your Eonon A0119 backup camera. Professional installation is recommended for optimal results.

Accessori inclusi

Eonon A0119 backup camera accessories including user manual, power cable, video cable, screws, and the camera unit.

Figure 1: Eonon A0119 Backup Camera and Accessories

  • 1x English User's Manual
  • 1x cavo di alimentazione (1 m)
  • 1x Video Cable (6m)
  • 2x Viti
  • 1x unità fotocamera

Schema elettrico

Wiring diagram for Eonon A0119 backup camera installation, showing connections for power, ground, reverse trigger, and RCA output to car stereo.

Figure 2: A0119 Backup Camera Wiring Diagram

Fasi di installazione

For Universal Car Stereo

  1. Connect the red +12V wire of the camera to the positive wire of the car reverse light, and connect the black GND wire to the negative wire of the car reverse light.
  2. Collega l'uscita RCA della telecamera all'ingresso della telecamera posteriore dell'autoradio.
  3. Collegare il filo rosso del grilletto della retromarcia della telecamera al cavo del comando della retromarcia dell'autoradio.
  4. Installazione terminata.

For Car-Specific Car Stereo

  1. Connect the red +12V wire of the camera to the positive wire of the car reverse light, and connect the black GND wire to the negative wire of the car reverse light.
  2. Collega l'uscita RCA della telecamera all'ingresso della telecamera posteriore dell'autoradio.
  3. Installazione terminata.

Nota: If your car stereo has a CAN Bus system, you may not need to connect the reversing trigger cable. Consult your car stereo's manual for specific wiring requirements.

Operazione

The Eonon A0119 backup camera is designed for automatic activation. When your vehicle is shifted into reverse gear, the camera will automatically display the rear view on your connected car stereo screen.

High Definition Imaging

Comparison of image quality between a standard camera and the Eonon A0119, showing clearer high-definition output from A0119.

Figure 3: High Definition Image Comparison

The A0119 camera utilizes a CMOS high-definition color sensor, providing a clear and detailed image with 420,000 pixels. This ensures better visibility of obstacles and surroundings behind your vehicle.

Grandangolo View and Guard Lines

Eonon A0119 CMD camera highlighting features: High Definition Wide Angle, Waterproof, Color, Reversing Guard Line Function.

Figura 4: Caratteristiche della fotocameraview

With a 170° wide-angle view and 120° horizontal view angle, the camera minimizes blind spots. It also features reversing guard lines (parking lines) to assist you in judging distances and maneuvering into parking spaces.

Funzionalità impermeabile

Eonon A0119 backup camera demonstrating its waterproof function with water splashing on the lens.

Figura 5: Design impermeabile

The A0119 camera is designed with a waterproof housing (Image Sensor: 7070), ensuring reliable performance in various weather conditions, including rain and car washes.

Manutenzione

To ensure optimal performance and longevity of your Eonon A0119 backup camera, follow these simple maintenance guidelines:

  • Pulizia della lente: Pulire regolarmente l'obiettivo della fotocamera con un panno morbido eamp panno per rimuovere sporco, polvere o macchie d'acqua. Evitare l'uso di detergenti abrasivi o materiali che potrebbero graffiare la lente.
  • Controllo delle connessioni: Periodically inspect all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent video signals or complete loss of function.
  • Ispezione dell'alloggiamento: Check the camera housing for any signs of damage or cracks that could compromise its waterproof integrity.

Risoluzione dei problemi

If you encounter issues with your Eonon A0119 backup camera, refer to the following common problems and solutions:

  • Nessuna immagine o schermo nero:
    • Ensure all power and video connections are securely plugged in.
    • Verify that the camera is receiving proper 12V power. Test the power source (e.g., reverse light circuit) with a multimeter.
    • Check the car stereo's input selection to ensure it is set to the correct rear camera input.
  • Flickering, Freezing, or Grainy Image:
    • This can indicate an unstable power supply. Ensure the camera is receiving a consistent 12V.
    • In some vehicles, especially those with complex electrical systems (e.g., European cars), a power regulator or relay may be necessary to stabilize the power to the camera and prevent interference.
    • Check the video cable for damage or kinks.
  • Camera Angle Shifts or Does Not Stay in Place:
    • Ensure the mounting screws are tightened sufficiently. If using adhesive, ensure the surface is clean and dry before application.
    • If the camera's adjustable angle mechanism is loose, it may require re-securing or a small amount of adhesive to hold its position.
  • Visione notturna scarsa:
    • While the camera has a low minimum illumination, extreme darkness may still result in a less clear image. Ensure your vehicle's reverse lights are functioning correctly to provide adequate illumination.

If these steps do not resolve the issue, please contact Eonon customer support for further assistance.

Specifiche tecniche

Avvicinamento view of the Eonon A0119 backup camera with dimensions: 20mm, 18mm, 24mm.

Figure 6: A0119 Camera Dimensions

CaratteristicaSpecificazione
ModelloEONON A0119
ColoreNero
Grandangolo170°
Orizzontale View Angolo120°
Sensore di immagine7070 (CMOS)
Pixel totali420,000 pixel
RisoluzioneLinee 420TV
Illuminazione minima0.2 Lux/F1.8 (0 Lux con LED)
Uscita video1.0 Vpp/75Ω
Alimentazione elettricaCC 12V
Camera Size (L x W x H)24 mm x 20 mm x 18 mm (circa)
Dimensioni del prodotto (L x P x A)24.8"L x 16.9"W x 9.8"H (packaging/overall product)
Tipo di installazioneMontaggio in superficie
Tipo di connettoreRCA

Garanzia e supporto

Eonon products are manufactured to high-quality standards. For specific warranty details regarding your A0119 backup camera, please refer to the warranty information provided with your purchase or visit the official Eonon website. If you require technical assistance, troubleshooting support, or have questions about your product, please contact Eonon customer service through their official channels.

For the latest support information and contact details, please visit the Negozio EONON su Amazon o il loro funzionario websito.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.