Prodotto finitoview
The LiftMaster 811LM Security+ 2.0 Remote Control is a 1-button programmable remote designed exclusively for commercial gate operators. It utilizes LiftMaster's Security+ 2.0 encrypted technology for secure access. This remote is NOT for residential garage systems and should only be used with an 850LM receiver.
Image: LiftMaster 811LM 1-Button Remote Control in its retail packaging.
Installazione e programmazione
Unboxing e configurazione iniziale
Upon opening the package, you will find the remote control, a visor clip, and instructions. The remote is typically ready for immediate use with standard settings. To attach the visor clip:
- Locate the small slot on the back of the remote control.
- Slide the metal visor clip into this slot until it clicks securely into place.
Programmazione del telecomando
To program your LiftMaster 811LM remote control to your commercial gate operator, follow these steps:
- Locate the 'Learn' button on your gate operator's control panel or the yellow button directly on the gate opener unit itself.
- Press and release the 'Learn' button once on the gate opener unit. If using a wall-mounted control panel with a 'Learn' button, press it twice. The indicator light on the control panel or opener will illuminate, signaling it is in programming mode.
- Within 30 seconds, press and hold the button on your LiftMaster 811LM remote control.
- Continue holding the remote button until you hear a click from the gate operator unit or see its light flash. This indicates successful programming.
- Rilasciare il pulsante sul telecomando.
Test the remote by pressing the button. The gate should respond.
Setting DIP Switches (if applicable)
If your commercial gate system requires specific DIP switch settings, you can access them by opening the remote control. To do this, gently press on the front cover of the remote to reveal the internal components, including the battery and a row of small switches (DIP switches). Adjust these switches to match the code of your gate operator as per your gate system's instructions. Ensure the cover is securely reattached after making any adjustments.
Operazione
Once programmed, operating the LiftMaster 811LM remote control is straightforward:
- Point the remote control towards your commercial gate operator.
- Press the single button on the remote control.
- The gate should activate, either opening or closing depending on its current state.
Manutenzione
Sostituzione della batteria
The remote control requires 2 CR2 batteries. If the remote's range decreases or it stops responding, the battery may need replacement. To replace the battery:
- Gently press on the front cover of the remote control to open it.
- Individua il vano batteria.
- Rimuovere le vecchie batterie CR2 e inserirne di nuove, assicurandosi della corretta polarità.
- Chiudere saldamente il coperchio anteriore.
Risoluzione dei problemi
Se il telecomando non funziona come previsto, tenere presente quanto segue:
- Controllare la batteria: Ensure the batteries are fresh and correctly installed.
- Riprogrammare: Attempt to reprogram the remote control following the steps in the 'Programming Your Remote Control' section.
- Impostazioni dell'interruttore DIP: If your system uses DIP switches, verify that the settings on the remote match those of your gate operator.
- Allineare: Ensure you are within the operational range of the gate operator.
- Compatibilità: Confirm that your gate operator is compatible with LiftMaster Security+ 2.0 technology and the 811LM model. Remember, this remote is for commercial gates only and requires an 850LM receiver.
Specifiche
- Numero modello: 811LM
- Tecnologia: Sicurezza+ 2.0
- Numero di pulsanti: 1
- Fonte di energia: 2 batterie CR2 (necessarie)
- Compatibilità: Commercial Gate Operators with 850LM receiver only
- Peso dell'articolo: 4.5 once
- Dimensioni: 5.16 x 2.8 x 2.28 pollici (dimensioni imballo)
- Caratteristica speciale: Design ergonomico
Informazioni importanti sulla sicurezza
This LiftMaster 811LM remote control is specifically designed for commercial gate operators only. È NOT compatible with residential garage door openers. Using this remote with incompatible systems may result in malfunction or damage. Always ensure proper programming and adherence to all safety guidelines provided with your gate operator system.
Garanzia e supporto
For detailed warranty information, technical support, or to access additional resources, please refer to the official LiftMaster websito o contattare direttamente il servizio clienti. Conservare la ricevuta d'acquisto per eventuali reclami in garanzia.