Fengda BD-116C Airbrush Gun User Manual

Introduzione

This manual provides instructions for the safe and effective operation and maintenance of your Fengda BD-116C Airbrush Gun. Please read this manual thoroughly before use and retain it for future reference.

Informazioni sulla sicurezza

AVVERTIMENTO:

• Protect yourself from chemical exposure. Always use appropriate personal protective equipment (PPE) such as respirators, gloves, and eye protection when handling paints and cleaning solutions.
• Handle pressurized components carefully. Ensure all connections are secure before operating the airbrush. Never point the airbrush at yourself or others.
• Ensure proper application of used materials. Dispose of paints, solvents, and cleaning solutions according to local environmental regulations.
• Tenere fuori dalla portata dei bambini.
• Utilizzare in un'area ben ventilata.

Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:

• 1 x BD-R 116 Airbrush Gun
• 1 x Metal Paint Cup (2 ml)
• 1 x Metal Paint Cup (5 ml)
• 1 x Metal Paint Cup (13 ml)
• 3 x Nozzles (0.3 mm, 0.5 mm, 0.8 mm)
• 3 x Needles (0.3 mm, 0.5 mm, 0.8 mm)
• 2 x Air Connectors
• 1 x tubo dell'aria (2 metri)
• 1 x Mounting Tool
• 1 x Manuale utente (questo documento)
• 1 x Molded Plastic Storage Box

Image: The Fengda BD-116C Airbrush Gun with its various nozzles, needles, paint cups, air hose, and tools, all neatly arranged in its storage box.

Impostare

1. Disimballare i componenti: Carefully remove all items from the storage box. Inspect for any damage.
2. Select Nozzle and Needle: Choose the appropriate nozzle and needle size (0.3mm, 0.5mm, or 0.8mm) for your painting task. The 0.3mm is for fine details, 0.5mm for general work, and 0.8mm for broader coverage. Ensure the needle matches the nozzle size.
3. Assemble Nozzle and Needle:
   • Unscrew the needle chucking guide and pull out the needle.
   • Unscrew the nozzle cap and remove the nozzle.
   • Carefully insert the chosen nozzle and screw the nozzle cap back on. Do not overtighten.
   • Reinsert the chosen needle from the rear of the airbrush, pushing it gently until it seats correctly in the nozzle.
   • Tighten the needle chucking guide.
4. Fissare il contenitore per la vernice: Screw the desired paint cup (2ml, 5ml, or 13ml) onto the top of the airbrush gun.
5. Collegare il tubo dell'aria: Attach one end of the 2-meter air hose to the airbrush gun's air inlet and the other end to your air compressor (not included). Ensure connections are secure to prevent air leaks.
6. Preparare l'area di lavoro: Set up your workspace in a well-ventilated area. Cover surfaces to protect them from overspray.

Istruzioni per l'uso

1. Preparare la vernice: Thin your paint to the consistency recommended by the paint manufacturer for airbrushing. Test the consistency on a scrap surface.
2. Riempi il contenitore della vernice: Carefully pour the prepared paint into the attached paint cup. Do not overfill.
3. Connetti alimentazione: If your compressor is battery-powered, ensure it is charged. Connect the compressor to a power source if it requires mains electricity.
4. Attivare il compressore: Activate your air compressor and set the desired air pressure. Start with a lower pressure and adjust as needed.
5. Prova a spruzzo: Prima di applicare la vernice al progetto, testare il getto di spruzzo su un pezzo di materiale di scarto.
6. Airbrush Technique:
   • Hold the airbrush approximately 5-15 cm (2-6 inches) from the surface, depending on the desired spray pattern and detail.
   • Press down on the trigger for air flow.
   • Pull back on the trigger to release paint. The further you pull back, the more paint is released.
   • Maintain a consistent distance and movement for even coverage.
   • Always start and end your spray off the work surface to avoid paint build-up.
7. Regolazione del flusso: Use the needle stop screw at the rear of the airbrush to limit how far the needle can retract, controlling the maximum paint flow.
8. Finitura: When finished painting, release the trigger completely. Turn off your air compressor.

Manutenzione e pulizia

Proper cleaning after each use is essential for the longevity and performance of your airbrush gun.

1. Risciacquo iniziale: Empty any remaining paint from the cup. Add a small amount of appropriate cleaner (water for acrylics, solvent for enamels/lacquers) to the cup. Spray the cleaner through the airbrush until it runs clear.
2. Back-Flush: Place your finger over the nozzle cap and press down for air, then pull back for paint. This will force air back into the paint cup, bubbling the cleaner and helping to dislodge paint particles. Repeat several times.
3. Smontare per una pulizia profonda: For a thorough clean, disassemble the airbrush:
   • Remove the paint cup.
   • Unscrew the needle chucking guide and carefully pull out the needle from the rear. Clean the needle with a cloth damprifinito con detergente.
   • Unscrew the nozzle cap and remove the nozzle. Clean the nozzle carefully with a soft brush and cleaner.
   • Clean the airbrush body and paint channel with a brush and cleaner.
4. Rimontare: Once all parts are clean and dry, reassemble the airbrush. Apply a tiny amount of airbrush lubricant (if available) to the needle and trigger mechanism.
5. Magazzinaggio: Store the airbrush in its original storage box to protect it from dust and damage.

Risoluzione dei problemi

Specifiche

• Modello: BD-116C
• Marca: Fengda
• Dimensioni degli ugelli: 0.3 millimetri, 0.5 millimetri, 0.8 millimetri
• Dimensioni degli aghi: 0.3 millimetri, 0.5 millimetri, 0.8 millimetri
• Paint Cup Capacities: 2 ml, 5 ml, 13 ml (metal)
• Lunghezza del tubo dell'aria: 2 metri
• Materiale: Metallo
• Fonte di energia: Battery (for compatible compressors, airbrush itself is pneumatic)
• Dimensioni del prodotto (confezione): Dimensioni: 24.3 x 18.3 x 4.9 cm
• Peso del prodotto (confezione): 670 grammi

Garanzia e supporto

Per informazioni sulla garanzia o assistenza tecnica, consultare la documentazione fornita con l'acquisto o contattare il rivenditore. Conservare la prova d'acquisto per eventuali reclami in garanzia.