HyperX Savage DDR4 Memory Module User Manual

Introduzione

This manual provides essential information for the installation, operation, and maintenance of your HyperX Savage DDR4 memory modules. The HyperX Savage DDR4 memory is designed to complement Intel's 2, 4, 6, or 8 core processors, offering enhanced performance for tasks such as video editing, 3D rendering, gaming, and AI processing. These modules feature speeds up to 3000MHz and latencies of CL15, optimized for Intel's 100 series chipset and X99 chipset motherboards, supporting easy overclocking via XMP profiles.

Immagine: Frontale view of the HyperX Savage DDR4 memory module, showcasing its black heat spreader with the HyperX logo and Savage DDR4 branding.

Contenuto della confezione

Verifica che il pacco contenga i seguenti articoli:

• 2 x HyperX Savage DDR4 Memory Modules (8GB each, 16GB Kit)

Configurazione e installazione

Before installing the memory modules, ensure your system is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

1. Preparazione

1. Verifica della compatibilità: Confirm that your motherboard supports DDR4 DIMM memory modules and the specified speed (3000MHz). Refer to your motherboard's manual for details.
2. Spegni: Spegnere completamente il computer e scollegare il cavo di alimentazione.
3. Caso aperto: Open your computer's side panel to access the motherboard.

2. Installazione del modulo

1. Individuare gli slot DIMM: Identify the DDR4 DIMM slots on your motherboard. Consult your motherboard manual for the correct slot configuration for dual-channel memory.
2. Clip aperte: Gently push down the retention clips at both ends of the DIMM slot.
3. Modulo Allinea: Hold the memory module by its edges, avoiding contact with the gold pins. Align the notch on the module with the key in the DIMM slot.
4. Inserisci modulo: Apply even pressure to both ends of the module until it seats firmly into the slot and the retention clips snap into place. Do not force the module.
5. Ripetere: Install the second memory module into the corresponding slot as indicated by your motherboard manual.

Immagine: Angolata view of the HyperX Savage DDR4 memory module, showing the heat spreader design and the gold contact pins.

3. Post-installazione

1. Chiudi caso: Riposizionare il pannello laterale del case del computer.
2. Ricollegare l'alimentazione: Plug the power cable back into your computer and power it on.

Istruzioni per l'uso

After physical installation, it is important to configure your system's BIOS/UEFI to utilize the full potential of your HyperX Savage DDR4 memory modules.

Enabling XMP Profile

HyperX Savage DDR4 memory modules come with built-in Intel XMP (Extreme Memory Profile) profiles. Questi profiles are optimized for Intel 100 series chipsets and X99 motherboards, allowing for easy overclocking without manual timing adjustments.

1. Accesso al BIOS/UEFI: Durante l'avvio del sistema, premere ripetutamente il tasto designato (comunemente DEL, F2, F10, O F12) to enter your motherboard's BIOS or UEFI settings. The specific key varies by motherboard manufacturer.
2. Individuare l'impostazione XMP: Navigate to the memory or overclocking section within the BIOS/UEFI. Look for an option related to 'XMP', 'DOCP', 'A-XMP', or 'Memory Profile'.
3. Abilita Profile: Select the XMP profile (usually 'Profile 1' or 'Enabled') to automatically configure the memory to its rated speed (3000MHz) and timings (CL15) at 1.35V.
4. Salva ed esci: Save the changes and exit the BIOS/UEFI. Your system will restart with the new memory settings applied.

If your system does not support XMP, the memory will operate at a default JEDEC speed, typically 2133MHz or 2400MHz, depending on your motherboard and CPU.

Manutenzione

HyperX Savage DDR4 memory modules are designed for durability and reliability. Minimal maintenance is required to ensure optimal performance and longevity.

• Mantenere pulito: Pulisci periodicamente l'interno del case del computer per evitare accumuli di polvere sui moduli di memoria e sugli altri componenti. Utilizza aria compressa per rimuovere delicatamente la polvere.
• Gestione corretta: Quando maneggiate i moduli di memoria, afferrateli sempre dai bordi per evitare di toccare i contatti dorati o i circuiti integrati.
• Controllo della temperatura: Ensure adequate airflow within your computer case to maintain optimal operating temperatures for all components, including memory.

Risoluzione dei problemi

If you encounter issues after installing your HyperX Savage DDR4 memory, consider the following troubleshooting steps:

• Il sistema non si avvia:
  • Ensure the memory modules are fully seated in their slots and the retention clips are locked.
  • Verify that your motherboard supports the installed memory type and speed.
  • Try booting with only one module installed to identify a potentially faulty module.
• Rilevata velocità errata:
  • Access your BIOS/UEFI settings and ensure the XMP profile è abilitato.
  • Update your motherboard's BIOS/UEFI to the latest version, as this can improve memory compatibility and stability.
• Instabilità o arresti anomali del sistema:
  • Eseguire uno strumento di diagnostica della memoria (ad esempio, Windows Memory Diagnostic o MemTest86) per verificare la presenza di errori.
  • Assicurati che l'alimentatore (PSU) fornisca energia sufficiente e stabile a tutti i componenti.
  • Check for proper cooling within your system to prevent overheating.

Specifiche

Garanzia e supporto

HyperX Savage DDR4 memory modules are backed by a lifetime warranty, ensuring long-term reliability and peace of mind. Free technical support is also available to assist with any questions or issues you may encounter.

For warranty claims or technical assistance, please visit the official HyperX support websito o contattare il servizio clienti. Conservare la prova d'acquisto per la convalida della garanzia.

HyperX Support: www.hyperx.com/support