Introduzione
Thank you for choosing the Child Craft Bristol Compact Crib. This manual provides essential information for the safe assembly, operation, and maintenance of your crib. Please read all instructions carefully before assembly and keep this manual for future reference.
The Child Craft Bristol Compact Crib features a low-profile design for easy infant access, a durable wood construction, and includes a 3-inch foam mattress. It is equipped with ultra-quiet casters, two of which are locking, for improved maneuverability and stability.
Informazioni importanti sulla sicurezza
ATTENZIONE: la mancata osservanza di queste avvertenze e delle istruzioni di montaggio potrebbe causare lesioni gravi o mortali.
- Read all instructions before using the crib. Keep instructions for future use.
- Non utilizzare questa culla se non è possibile seguire esattamente le istruzioni allegate.
- The crib, including side rails, must be fully erected prior to use.
- Do not place the crib near a window where cords from blinds or drapes could strangle a child.
- Do not suspend strings or toys over the crib.
- Do not place the crib near heat sources, windows, or other furniture.
- Discontinue use of the crib when a child begins to climb out or reaches the height of 35 inches (89 cm).
- Check this product for damaged hardware, loose joints, missing parts, or sharp edges before and after assembly and frequently during use. Do not use the crib if any parts are missing or broken. Contact Child Craft for replacement parts and instructional literature if needed. Do not substitute parts.
- Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place extra padding under an infant.
- Per ridurre il rischio di SIDS, i pediatri raccomandano di far dormire i neonati sani in posizione supina, salvo diversa indicazione del medico.
- Fornisci sempre la supervisione necessaria per la continua sicurezza del tuo bambino.
- The mattress supplied with this crib is 3 inches thick. Ensure any replacement mattress used is at least 3 inches thick and fits snugly without gaps.
Contenuto della confezione
Before beginning assembly, ensure all parts are present. If any parts are missing or damaged, do not proceed with assembly. Contact Child Craft customer support for assistance.
- Crib Frame Components (sides, ends, mattress support)
- Pacchetto hardware (viti, bulloni, chiave a brugola)
- 4 x 3-inch Caster Wheels (2 locking, 2 non-locking)
- 1 x 3-inch Foam Mattress
- Manuale di istruzioni
Installazione e assemblaggio
Assembly typically requires two adults. Follow the steps below carefully. Do not overtighten fasteners.
- Disimballare i componenti: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratching. Verify all package contents are present.
- Fissare le rotelle: Insert the four 3-inch caster wheels into the designated holes at the bottom of each leg. Ensure the two locking casters are installed on the same side for easier access. Press firmly until they click into place.
- Montare la struttura della culla: Connect the crib ends to the side rails using the provided hardware. Ensure all connections are secure but do not fully tighten until the entire frame is assembled.
- Installare il supporto per il materasso: Position the mattress support frame within the crib. The mattress support can be adjusted to two different height positions. Choose the appropriate height based on the child's age and development. Secure the mattress support to the crib frame using the provided hardware.
- Serraggio finale: Once all components are assembled, carefully tighten all screws and bolts. Do not overtighten.
- Posizionare il materasso: Insert the 3-inch foam mattress into the crib. Ensure it fits snugly without any gaps between the mattress and the crib sides.
Immagine: Primo piano view of a crib leg with an attached caster wheel. This illustrates how the caster wheels are installed at the base of the crib legs.
Image: Fully assembled Child Craft Bristol Compact Crib in natural wood finish, shown with the included foam mattress. This provides a complete view of the product after assembly.
Istruzioni per l'uso
Regolazione dell'altezza del materasso
The mattress support can be set to two different heights. The higher position is for infants, providing easier access for caregivers. The lower position is for older infants and toddlers who can push up on their hands and knees or stand, to prevent them from climbing out.
- Rimuovi il materasso dalla culla.
- Carefully detach the mattress support from the crib frame by unscrewing the fasteners.
- Re-attach the mattress support to the desired height position, ensuring all fasteners are securely tightened.
- Sostituisci il materasso.
Using Caster Wheels
The crib is equipped with four 3-inch caster wheels for easy movement. Two of these casters are locking to secure the crib in place.
- To Move the Crib: Ensure both locking casters are in the unlocked position. Gently push the crib to its desired location.
- To Secure the Crib: Once the crib is in position, engage the locks on the two locking casters by pressing down on the lever. Verify the crib is stable and does not move.
Manutenzione e cura
- Pulizia: Pulisci le superfici della culla con un pannoamp panno. Evitare detergenti abrasivi o sostanze chimiche aggressive che potrebbero danneggiare la finitura o i materiali.
- Controllo hardware: Regularly check all screws, bolts, and fasteners to ensure they are tight and secure. Loose hardware can pose a safety hazard.
- Magazzinaggio: If storing the crib, ensure it is clean and dry. Store in a climate-controlled environment to prevent warping or damage to the wood.
- Cura del materasso: The foam mattress can be spot cleaned with a mild soap and water solution. Allow to air dry completely before placing back in the crib.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La culla sembra traballante o instabile. | Hardware sciolto. | Controllare e serrare tutte le viti e i bulloni. Non serrare eccessivamente. |
| Le rotelle non scorrono fluidamente. | Debris in wheels or casters not fully inserted. | Clean any debris from the wheels. Ensure casters are fully seated in the legs. |
| Il materasso non è perfettamente aderente. | Incorrect mattress size or improper assembly. | Ensure the correct mattress (3-inch foam mattress included) is used. Recheck crib assembly to ensure all parts are correctly aligned. |
| Crib makes squeaking noises. | Giunti allentati o attrito tra le parti in legno. | Stringere tutta la bulloneria. Se necessario, applicare una piccola quantità di paraffina o spray al silicone sui punti di contatto. |
Specifiche
- Numero modello: F99040.04
- Marca: Artigianato per bambini
- Materiale: Legna
- Colore: Natural (Beige finish)
- Dimensioni assemblate (L x P x A): 39 cm L x 26.25 cm P x 38 cm A
- Peso dell'articolo: 52 libbre
- Consiglio di peso massimo: 50 libbre
- Ruote: 4 x 3-inch ultra-quiet casters (2 locking)
- Materasso: Includes 3-inch foam mattress
- Supporto del materasso: Adjustable to two positions
- Certificazioni di sicurezza: Exceeds CPSC and ASTM standards, verified by Baby Safety Alliance.
Informazioni sulla garanzia
Child Craft products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or contact Child Craft customer support directly. Typically, warranties cover manufacturing defects under normal use.
Assistenza clienti
If you have any questions, require replacement parts, or need assistance with your Child Craft Bristol Compact Crib, please contact the manufacturer or your retailer.
- Produttore: Fondazioni
- Marca: Artigianato per bambini
- Refer to the product packaging or the Child Craft official websito per le informazioni di contatto più aggiornate.
