Rosewill TYRFING ATX Mid Tower Gaming PC Computer Case Instruction Manual

1. Prodotto finitoview

The Rosewill TYRFING is an ATX Mid Tower computer case designed to accommodate various PC components. It features a spacious internal layout supporting large motherboards, graphics cards, and liquid cooling solutions. The case includes top-mounted I/O ports, tool-less drive installation, and a bottom dust filter for ease of use and maintenance.

Figura 1.1: Fronte view of the Rosewill TYRFING case with the side panel removed, showcasing the internal layout.

2. Contenuto della confezione

Verificare che tutti i componenti siano presenti nella confezione prima di iniziare l'installazione:

• Rosewill TYRFING ATX Mid Tower Computer Case
• Expansion Slot Bracket
• Assorted Screws for component installation
• Cable Ties for cable management
• Manuale di istruzioni (questo documento)

3. Configurazione e installazione

3.1 Caso finitoview e dimensioni

The TYRFING case supports ATX, microATX, and Mini-ITX motherboards. It accommodates graphics cards up to 400mm in length, CPU coolers up to 160mm in height, and power supply units (PSUs) up to 300mm in length.

Figure 3.1: Case dimensions (Height: 457.96mm / 18.03in, Length: 486.92mm / 19.17in, Width: 199.9mm / 7.87in).

Figure 3.2: Component compatibility diagram showing motherboard, CPU cooler, VGA card, PSU, and drive bay locations.

3.2 Installazione della scheda madre

1. Remove the side panel by unscrewing the thumbscrews at the rear of the case.
2. Install the necessary motherboard standoffs into the motherboard tray according to your motherboard's form factor (ATX, microATX, or Mini-ITX).
3. Posizionare con attenzione la scheda madre sui distanziatori, allineando i fori delle viti.
4. Fissare la scheda madre con le viti fornite. Non serrare eccessivamente.

3.3 Installazione della scheda grafica e della scheda di espansione

1. Identify the appropriate expansion slots on the rear of the case.
2. Remove the necessary expansion slot covers. These covers may require careful removal, potentially using a tool like a dremel for a clean break, as noted by some users.
3. Inserisci la scheda grafica o altre schede di espansione negli slot PCIe della scheda madre.
4. Secure the cards with screws or the provided retention mechanism.

3.4 Installazione dell'unità di alimentazione (PSU).

The TYRFING supports bottom-mounted PSUs up to 300mm in length.

1. Posizionare l'alimentatore nell'apposito vano nella parte inferiore posteriore del case.
2. Align the PSU with the screw holes on the rear panel.
3. Secure the PSU with the provided screws.

3.5 Installazione dell'unità (HDD/SSD)

The case features tool-less 3.5" device installation.

1. Locate the drive bays. The case includes internal bays for 3.5-inch hard drives.
2. Slide the hard drive or SSD into the appropriate drive tray/caddy.
3. Secure the drive within the tray if necessary, then slide the tray back into the bay until it clicks into place.

3.6 Installazione del sistema di raffreddamento

The TYRFING comes with two pre-installed 120mm fans. It supports additional cooling options.

• AIO Liquid Cooler Support: The case supports a 360mm AIO liquid cooler radiator on the top panel and a 120mm radiator in the rear.
• Altezza del dispositivo di raffreddamento della CPU: Il case può ospitare dissipatori per CPU alti fino a 160 mm.
• Optional Fans: Additional fan mounting points are available for enhanced airflow.

3.7 Porte I/O frontali

The top-mounted I/O panel provides convenient access to:

• 1 porte USB 3.0
• 2 porte USB 2.0
• Audio Out (Headphone)
• Microfono in
• Pulsante di accensione

Figura 3.3: dettagliata view of the top-mounted I/O ports.

Figura 3.4: Esample of a fully assembled system within the TYRFING case.

4. Istruzioni per l'uso

Once all components are installed and connected, ensure all cables are properly routed and secured to prevent interference with fans or airflow. Close the side panel and connect the necessary peripherals (monitor, keyboard, mouse, power cable). Press the power button on the top I/O panel to start your system.

The case is designed for efficient airflow to maintain optimal component temperatures. The two pre-installed 120mm fans contribute to this airflow. Consider installing additional fans or a liquid cooling system if your components generate significant heat.

5. Manutenzione

Una manutenzione regolare aiuta a prolungare la durata dei componenti del PC e garantisce prestazioni ottimali.

• Pulizia del filtro antipolvere: The TYRFING case includes a dust filter located at the bottom, beneath the PSU. Periodically remove and clean this filter to prevent dust buildup inside the case, which can impede airflow and cause components to overheat.
• Pulizia interna: Use compressed air to gently remove dust from internal components such as fans, heatsinks, and graphics cards. Ensure the system is powered off and unplugged before cleaning.
• Gestione dei cavi: Periodically check cable routing to ensure no cables are obstructing airflow or fan operation.

6. Risoluzione Dei Problemi

This section addresses common issues encountered during PC assembly or operation with the TYRFING case.

• Difficulty Removing Expansion Slot Covers: Some users report that the rear panel PCIe cutouts can be difficult to remove. If standard methods are insufficient, a rotary cutting tool may be used, but exercise extreme caution and ensure no metal fragments remain in the case before installing components.
• Front Audio Cable Length: The front panel audio cable may be minimally long for some motherboard layouts. Ensure it is routed carefully to avoid tension or obstruction.
• No Reset Button/HDD Light: The TYRFING case does not include a dedicated reset button or HDD activity light. This is by design and does not indicate a malfunction.
• Loose Screws/Thin Metal: When installing components, avoid overtightening screws, especially into plastic parts, as the metal may be thin. Ensure proper alignment to prevent cross-threading.

For issues not covered here, consult the documentation for your individual PC components or contact Rosewill customer support.

7. Specifiche

8. Garanzia e supporto

The Rosewill TYRFING ATX Mid Tower Gaming PC Computer Case comes with a Garanzia di 1 anno from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified standards.

For technical assistance, warranty claims, or further inquiries, please contact Rosewill customer support through their official website or the contact information provided with your purchase documentation. Please have your product model number (TYRFING) and proof of purchase ready when contacting support.