Introduzione
The XPOWER P-830H Pro 1 HP Centrifugal Air Mover is an energy-efficient, high-velocity fan designed for a variety of drying, cooling, and ventilation applications. It is ideal for water damage restoration, janitorial tasks, plumbing, and general home use. Its robust construction and versatile features make it a valuable tool for both indoor and outdoor environments.
Figure 1: XPOWER P-830H Pro Air Mover, a powerful and compact unit.
Informazioni sulla sicurezza
Always read and understand all instructions before using the XPOWER P-830H Air Mover. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.
- Assicurarsi che l'unità sia collegata a una presa correttamente messa a terra.
- Non utilizzare l'unità con un cavo o una spina danneggiati.
- Tenere bambini e animali domestici lontani dall'unità durante il funzionamento.
- Do not use in standing water or excessively wet conditions.
- Avoid blocking air intake or exhaust openings.
- Disconnect from power supply before servicing or cleaning.
- This product is ETL/CETL safety certified, indicating compliance with North American safety standards.
Impostare
The P-830H is designed for quick and easy deployment.
- Disimballaggio: Carefully remove the air mover from its packaging. Inspect for any shipping damage.
- Posizionamento: Place the air mover on a stable, flat surface. The unit features three drying positions (0°, 20°, and 90°) to direct airflow precisely where needed. Utilize the built-in kickstand for angled positions.
- Collegamento elettrico: Extend the 20 ft. industrial power cord and plug it into a suitable grounded electrical outlet.
- Impilamento (facoltativo): For larger areas or storage, multiple P-830H units can be stacked up to four units high. Ensure units are securely stacked before operation.
Figure 2: The P-830H can be positioned at 0°, 20°, and 90° angles for optimal airflow direction.
Figure 3: Units can be stacked up to three high for efficient storage and transport.
Istruzioni per l'uso
The XPOWER P-830H is simple to operate with its intuitive controls.
- Accensione: Locate the speed switch on the top of the unit.
- Seleziona velocità: Turn the switch to select one of the three available speeds (1, 2, or 3). Speed 3 provides the maximum airflow of 3600 CFM.
- Regola la posizione: If necessary, adjust the unit's position to 0°, 20°, or 90° to optimize airflow for the target area.
- Monitoraggio: Allow the unit to operate until the desired drying or ventilation is achieved.
- Spegni: Turn the speed switch to the "OFF" position when finished.
Figure 4: The control panel features a speed switch and convenient cord wrap for storage.
Applicazioni:
- Ripristino danni causati dall'acqua: Accelerates drying of carpets, floors, walls, and other surfaces after leaks or floods.
- Ventilazione: Improves air circulation in enclosed spaces, workshops, garages, and basements.
- Asciugatura generale: Useful for drying paint, furniture, and auto interiors.
Figure 5: The P-830H is versatile for various drying and ventilation needs.
Manutenzione
Regular maintenance ensures optimal performance and longevity of your air mover.
- Pulizia: Pulire periodicamente l'esterno dell'unità con un pannoamp stoffa. Assicurarsi che l'unità sia scollegata prima della pulizia.
- Aspirazione/scarico aria: Keep the air intake and exhaust grilles free from dust, debris, and obstructions to maintain efficient airflow.
- Magazzinaggio: When not in use, store the air mover in a cool, dry place. The unit's stackable design allows for efficient storage. Utilize the wrap-around cord design to keep the power cord tidy.
Risoluzione dei problemi
If you encounter issues with your XPOWER P-830H, refer to the following common troubleshooting steps:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| L'unità non si accende. | Nessuna corrente, interruttore automatico scattato, cavo/spina danneggiati. | Check power outlet, reset circuit breaker, inspect cord/plug for damage. |
| Flusso d'aria ridotto. | Aspirazione/scarico dell'aria bloccati, pale della ventola sporche. | Clear obstructions, clean grilles and fan blades (ensure unit is unplugged). |
| Rumori o vibrazioni insoliti. | Loose components, foreign object inside, unit not on a stable surface. | Ensure unit is on a stable surface, check for loose parts or foreign objects. If problem persists, contact customer service. |
For issues not listed above, or if troubleshooting steps do not resolve the problem, please contact XPOWER customer service.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Potere X |
| Numero di modello | P-830H-Blue |
| Motore | Motore a induzione da 1 CV |
| Capacità del flusso d'aria | Fino a 3600 CFM (piedi cubi al minuto) |
| AmpFuga Disegna | 8.5 Amps (at highest setting) |
| Velocità | 3 (Basso, Medio, Alto) |
| Posizioni di asciugatura | 0°, 20°, 90° |
| Materiale dell'alloggiamento | Injection-Molded Polypropylene (PP) |
| Lunghezza del cavo di alimentazione | 20 piedi |
| Dimensioni (L x P x A) | 15.9" x 18.7" x 18.7" |
| Peso dell'articolo | 27 libbre |
| Certificazione di sicurezza | ETL / CETL |
Figure 6: Key dimensions of the P-830H Air Mover.
Figure 7: Detailed specifications for the P-830H and other Pro Series models.
Garanzia e supporto
The XPOWER P-830H Air Mover is backed by a Garanzia limitata del produttore di 1 annoLa presente garanzia copre i difetti di materiale e di fabbricazione in condizioni di normale utilizzo.
For warranty claims, technical support, or any inquiries, please contact XPOWER Manufacture Inc. customer service. Their California-based team offers comprehensive support to ensure a first-class customer experience.
Informazioni sui contatti: Fare riferimento al sito ufficiale XPOWER websito o sulla confezione del prodotto per i dettagli di contatto più aggiornati.
