BTF-LIGHTING 16.4ft Warm White SMD5630 LED Strip Light User Manual

Introduzione

This manual provides essential information for the safe and effective installation, operation, and maintenance of your BTF-LIGHTING 16.4ft Warm White SMD5630 LED Strip Light. Please read this manual thoroughly before use and retain it for future reference.

Informazioni sulla sicurezza

Assicurarsi che l'alimentazione sia scollegata prima dell'installazione o della manutenzione.
This LED strip is designed for 12V DC power only. Connecting to a higher voltage danneggerà il prodotto.
This product is IP30 rated, meaning it is non-waterproof. Avoid exposure to water or high humidity.
Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit board or LEDs.
Ensure proper ventilation around the LED strip to prevent overheating.
Tenere fuori dalla portata dei bambini.
Only use the recommended power adapter (DC12V3A) or a compatible power supply.

Contenuto della confezione

Verificare che tutti i componenti siano presenti e in buone condizioni:

1 x BTF-LIGHTING 16.4ft (5m) Warm White SMD5630 LED Strip Light
1 x Remote Control (if included with your specific package)
Note: Power adapter is typically sold separately.

Specifiche

Marca	BTF-ILLUMINAZIONE
Numero di modello	56305MWW60W30
Tipo di LED	SMD5630
Quantità LED	300 LED (60 LED/metro)
Lunghezza della striscia	16.4 ft (5 metri)
FPCB Board Width	10mm
Colore chiaro	Bianco caldo
Temperatura del colore	2700K-3000K
Lumen per LED	23-25 lm/LED
Volume di lavorotage	CC 12V
Adattatore di alimentazione consigliato	DC 12V 3A (36W) or higher
Cosatage	30 Watt
Livello di impermeabilità	IP30 (Non-Waterproof)
Temperatura di esercizio	-20°C a 50°C
Durata	>50,000 ore
Certificazioni	CE e RoHS

Istruzioni di installazione

Preparare la superficie: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can reduce the adhesive's effectiveness.
Immagine: Primo piano view of the LED strip, highlighting individual SMD5630 LEDs and designated cut points marked with a scissor icon. The strip also shows the adhesive backing being peeled.
Misura e taglia (facoltativo): If a shorter length is required, cut the LED strip only at the designated cut marks (usually indicated by a scissor icon and copper pads). Cutting elsewhere will damage the circuit and prevent the section from lighting up.
Connetti alimentazione:
- Identify the 2-pin connectors on the LED strip.
- Connect the LED strip's 2-pin connector to a compatible DC 12V power adapter (not included). Ensure polarity is correct (positive to positive, negative to negative).
- If a remote control is included, connect the LED strip to the remote controller, and then connect the controller to the power adapter.
Image: Two separate sections of the LED strip, each terminating with a 2-pin connector (red and black wires), ready for connection to a power source or controller.
Test Before Adhering: Before removing the adhesive backing, plug in the power adapter to test if the LED strip lights up correctly. This allows for troubleshooting before permanent installation.
Attaccare la striscia: Once tested, peel off the protective backing from the adhesive tape on the back of the LED strip. Carefully press the strip onto the desired clean, dry surface. Apply firm, even pressure along the entire length to ensure good adhesion.

Istruzioni per l'uso

Once the LED strip is properly installed and connected to a 12V DC power supply:

Accensione/spegnimento: Plug the power adapter into a wall outlet to turn the strip light on. Unplug it to turn it off.
Using the Remote Control (if applicable): If your package included a remote control, refer to its specific instructions for functions such as brightness adjustment or on/off control.

Examples of warm white LED strip lighting in various indoor settings

Immagine: Visual examples of LED strip lighting used in different indoor environments, demonstrating the warm white illumination. This image also shows Cool White and Nature White, but this product is Warm White.

Manutenzione

Pulizia: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Ispezione: Periodically check the strip for any signs of damage, loose connections, or adhesive degradation.
Magazzinaggio: If storing the LED strip, ensure it is kept in a dry, cool place, away from direct sunlight and extreme temperatures.

Risoluzione dei problemi

Problema	Possibile causa	Soluzione
La striscia LED non si accende.	Nessuna alimentazione all'adattatore. Incorrect power connection (polarity reversed). Adattatore di alimentazione difettoso. Striscia LED danneggiata. Remote control battery dead or not paired (if applicable).	Controllare la presa a muro e il collegamento dell'adattatore di alimentazione. Ensure positive (+) and negative (-) connections are correct. Test with a known working 12V DC power adapter. Inspect the strip for visible damage, especially at cut points. Replace remote battery or re-pair according to remote instructions.
Una parte della striscia LED non si accende.	Danni a una sezione della striscia. Taglio errato.	Inspect the unlit section for physical damage or a broken circuit. Assicurarsi che i tagli siano stati effettuati solo in corrispondenza dei segni indicati. Le sezioni danneggiate non possono essere riparate.
I LED sono deboli o tremolanti.	Alimentazione elettrica insufficiente. Collegamento allentato.	Assicurarsi che l'adattatore di alimentazione fornisca una potenza sufficientetage (minimum 30W for this strip). Controllare che tutti i collegamenti siano ben fissati.

Garanzia e supporto

I prodotti BTF-LIGHTING sono progettati per garantire affidabilità e prestazioni elevate. Per informazioni sulla garanzia, supporto tecnico o assistenza sul prodotto, contattare il servizio clienti BTF-LIGHTING tramite il rivenditore presso cui è stato acquistato il prodotto o visitare il sito ufficiale BTF-LIGHTING. websito.

Please have your model number (56305MWW60W30) and purchase details ready when contacting support.

BTF-LIGHTING 56305MWW60W30