1. Introduzione
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Holzmann HOB260ECO-400V Jointer Planer. Please read it thoroughly before operating the machine to ensure proper use and to prevent injury or damage.
The Holzmann HOB260ECO-400V is a combined jointer and planer machine designed for woodworking tasks, featuring a 250mm working width, a 400V motor, and 1500W power output. It is equipped with an adjustable aluminum fence, cast iron tables, and an automatic feed system.
2. Istruzioni di sicurezza
Dare sempre priorità alla sicurezza. La mancata osservanza di queste istruzioni può causare lesioni gravi o la morte.
- Dispositivi di protezione individuale (DPI): Always wear safety glasses, hearing protection, and appropriate work gloves. Avoid loose clothing, jewelry, and long hair that could get caught in moving parts.
- Area di lavoro: Keep the work area clean, well-lit, and free from obstructions. Ensure adequate space around the machine for safe operation and material handling.
- Sicurezza elettrica: This machine operates on 400V. Ensure proper electrical connections and grounding. Do not operate in damp or wet conditions. Disconnect power before making adjustments, changing blades, or performing maintenance.
- Sicurezza della lama: The machine contains sharp blades. Handle them with extreme care. Ensure blade guards are always in place when operating. Never reach into the machine while it is running.
- Movimentazione del pezzo: Always use push sticks or push blocks when feeding small workpieces. Ensure the workpiece is free of knots, nails, or foreign objects. Maintain firm control of the workpiece throughout the operation.
- Aspirazione della polvere: Connect a suitable dust extraction system to the 100mm dust port to maintain air quality and visibility. Wood dust can be a health hazard.
- Stabilità della macchina: Ensure the machine is securely placed on a stable, level surface before operation. The robust welded steel frame provides stability.
- Arresto di emergenza: Familiarizzare con la posizione e il funzionamento dell'interruttore di arresto di emergenza.
3. Componenti finitiview
The Holzmann HOB260ECO-400V Jointer Planer features several key components for its dual functionality:
- Adjustable Aluminum Fence: Tilts up to 45° for angled jointing. Dimensions: 700 x 130 mm.
- Cast Iron Jointer Tables: Pivoting (butterfly opening) design with noise-reducing lips. Dimensions: 1085 x 256 mm.
- Planer Table: For thickness planing. Dimensions: 590 x 245 mm.
- Cutter Block: Equipped with 3 HSS blades (250 x 30 x 3 mm). Diameter: 75 mm. Rotation speed: 4000 rpm.
- Automatic Feed System: Disengageable, with a feed rate of 5.5 m/min for planing.
- Volantino di regolazione dell'altezza: For precise adjustment of the planer table height.
- Porta di estrazione della polvere: 100 mm diameter for connecting a dust collector.
- Motore: 1500 W (S1 100%) motor, 400V.
Figura 1: generale view of the Holzmann HOB260ECO-400V Jointer Planer.
Figure 2: Close-up of the jointer table and adjustable fence.
4. Impostazione
Before initial operation, ensure the machine is properly set up.
- Disimballaggio e posizionamento: Carefully unpack the machine. Place it on a solid, level surface capable of supporting its 140 kg net weight.
- Collegamento elettrico: Connect the machine to a 400V power supply. Ensure the electrical circuit is properly fused and grounded according to local regulations.
- Aspirazione della polvere: Attach a dust extraction hose (100mm diameter) to the machine's dust port. Proper dust collection is crucial for safety and machine performance.
- Ispezione iniziale: Check all fasteners for tightness. Ensure all guards are correctly installed and functional. Verify that the cutter block rotates freely without obstruction.
5. Istruzioni per l'uso
The HOB260ECO-400V functions as both a jointer and a planer. Always ensure the machine is in the correct configuration for the desired operation.
5.1. Jointing (Dégauchissage)
Jointing is used to flatten one face and square one edge of a workpiece.
- Configurazione: Ensure the planer table is lowered and the jointer tables are in position. The dust extraction flap should be set for jointing.
- Regolazione della recinzione: Adjust the aluminum fence to the desired angle (90° for squaring, up to 45° for bevels). Secure the fence firmly.
- Profondità di taglio: Adjust the infeed table to set the desired depth of cut. The maximum depth of cut for jointing is 5 mm. Start with shallow cuts.
- Operazione: Turn on the machine. Place the workpiece on the infeed table, keeping it firmly against the fence. Slowly and steadily feed the workpiece over the cutter block, maintaining even pressure. Use push blocks for short or narrow pieces.
5.2. Planing (Rabotage)
Planing is used to achieve a uniform thickness and parallel faces on a workpiece.
- Configurazione: Pivot the jointer tables to switch to planing mode. Position the dust extraction flap for planing.
- Regolazione dell'altezza: Use the handwheel to adjust the planer table height to the desired thickness. The planing height range is 6 mm to 195 mm.
- Profondità di taglio: The maximum depth of cut for planing is 2.5 mm. Avoid taking excessively deep cuts, especially on wide or hard material.
- Operazione: Turn on the machine. The automatic feed system (5.5 m/min) will pull the workpiece through. Guide the workpiece into the machine, ensuring it is flat on the planer table. Do not force the workpiece.
6. Manutenzione
Una manutenzione regolare garantisce la longevità e il funzionamento sicuro della macchina.
- Sostituzione lama: The machine is supplied with 3 HSS blades (250 x 30 x 3 mm). Replace dull or damaged blades promptly. Always disconnect power before changing blades. Use a magnetic blade setter for accurate alignment.
- Pulizia: After each use, clean the machine, especially the tables and dust extraction areas, to prevent sawdust buildup.
- Lubrificazione: Apply appropriate grease (e.g., SGM1, SGM2, SGM3) to the sliding surfaces of the tables to ensure smooth operation.
- Ispezione della cinghia: Periodically check the double belt motor/shaft drive for wear and tension. Adjust or replace as necessary.
- Ispezione generale: Regularly inspect all moving parts, fasteners, and electrical connections for wear, damage, or looseness.
Figura 3: View of the dust extraction port and planer bed.
7. Risoluzione Dei Problemi
Questa sezione affronta i problemi più comuni che potresti incontrare.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La macchina non si avvia | Nessuna alimentazione; Arresto di emergenza attivato; Interruttore difettoso | Check power connection and circuit breaker; Disengage emergency stop; Contact qualified technician |
| Poor surface finish (jointing/planing) | Dull or damaged blades; Incorrect blade height; Uneven feed rate | Replace blades; Adjust blade height accurately; Maintain consistent feed pressure |
| Workpiece not feeding (planing) | Automatic feed disengaged; Feed rollers dirty or worn; Excessive depth of cut | Engage automatic feed; Clean or replace feed rollers; Reduce depth of cut |
| Vibrazione o rumore eccessivi | Loose components; Unbalanced cutter block; Worn bearings | Check and tighten all fasteners; Inspect cutter block for damage; Contact service for bearing replacement |
8. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Numero di modello | HOB260ECO-400V |
| Potenza motore (S1 100%) | 1500 L |
| Voltage / Frequenza | 400V |
| Cutter Block Speed | 4000 giri al minuto |
| Cutter Block Diameter | 75 millimetri |
| Numero di lame | 3 |
| Dimensioni lama | Dimensioni: 250 x 30 x 3 mm |
| Jointing Width | 250 millimetri |
| Dimensioni del tavolo di giunzione | 1085 x 256 millimetri |
| Max. Jointing Depth of Cut | 5 millimetri |
| Dimensioni della recinzione | 700 x 130 millimetri |
| Inclinazione della recinzione | Da 90° a 45° |
| Larghezza di piallatura | 245 millimetri |
| Dimensioni del tavolo pialla | 590 x 245 millimetri |
| Planing Height Range | Da 6 mm a 195 mm |
| Max. Planing Depth of Cut | 2.5 millimetri |
| Velocità di avanzamento | 5.5 metri al minuto |
| Diametro della porta della polvere | 100 millimetri |
| Peso netto | 140 kg |
| Dimensioni complessive (L x P x A) | Dimensioni: 108.4 x 47.2 x 105 cm |
9. Garanzia e supporto
The Holzmann HOB260ECO-400V Jointer Planer comes with a Garanzia di 2 anno. This warranty covers manufacturing defects but excludes wear parts. For warranty claims, technical support, or spare parts inquiries, please contact your authorized Holzmann dealer or the manufacturer directly.
Optional accessories available include: Mortising attachment K5260LL, additional blades, UFE 300 mobile base, dust extractor and hose, magnetic blade setter, and table sliding grease (SGM1, SGM2, SGM3).