Introduzione
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Satco S9750 30W LED HID Replacement Light Bulb. This Hi-Pro multi-beam LED lamp is designed for industrial and commercial applications, offering high lumen output and adjustable, multi-directional light. It is a direct wire range voltage 100-277V replacement for HID, CFL, and incandescent bulbs, approved for totally enclosed fixtures.
Informazioni sulla sicurezza
- AVVERTIMENTO: Rischio di scossa elettrica. Scollegare l'alimentazione prima dell'installazione o della manutenzione.
- Garantire la fornitura voltage is compatible with the bulb's operating voltage (100-277 V).
- Non smontare o modificare la lampadina. All'interno non ci sono parti riparabili dall'utente.
- This bulb is suitable for use in damp locations and approved for totally enclosed fixtures.
- Always handle the bulb by its base to avoid damaging the LED panels.
- Se non si è sicuri di una qualsiasi fase del processo di installazione, consultare un elettricista qualificato.
Contenuto della confezione
Prima di procedere con l'installazione, verificare che tutti i componenti siano presenti e integri.
- 1 x Satco S9750 30W LED HID Replacement Light Bulb
Configurazione e installazione
Follow these steps for proper installation of your Satco S9750 LED HID Replacement Light Bulb:
- Disconnessione dell'alimentazione: Before beginning any installation, ensure the power to the fixture is turned off at the circuit breaker.
- Rimuovere la vecchia lampadina: Carefully remove the existing HID, CFL, or incandescent bulb from the fixture.
- Bypass di zavorra: This LED bulb requires a direct wire connection and bypasses the existing ballast. If your fixture has a ballast, it must be bypassed or removed by a qualified electrician. The bulb operates on a direct wire range voltage di 100-277V.
- Controllare la compatibilità dell'apparecchio: Ensure the fixture has a medium (E26) base. The minimum compartment size for enclosed fixtures is 11 inches (Length) x 8 inches (Width) x 8 inches (Depth). The lamp length is 6.37 inches, and the diameter is 3.18 inches when closed, expanding to 7.68 inches when open.
- Installare una nuova lampadina: Screw the Satco S9750 LED bulb firmly into the medium (E26) base socket. Do not overtighten.
- Ripristina alimentazione: Once the bulb is securely installed and any necessary ballast bypass is complete, restore power at the circuit breaker.
Istruzioni per l'uso
The Satco S9750 features adjustable light panels, allowing you to customize the beam angle for various lighting needs.
- Regolazione dell'angolo del fascio: The light panels can be manually adjusted and locked into place to create three distinct beam angle options:
- 360° Beam: Panels fully closed, providing a wide, omnidirectional light spread (approx. 3.2 inches width).
- 270° Beam: Panels partially open, directing light over a broader area (approx. 6.8 inches width).
- 180° Beam: Panels fully open, concentrating light in a specific direction (approx. 7.7 inches width).
- Gently move the panels to the desired position until they click or lock into place. Avoid excessive force.
Manutenzione
La lampadina LED Satco S9750 richiede una manutenzione minima.
- Pulizia: Ensure power is disconnected before cleaning. Use a soft, dry cloth to wipe the bulb. Do not use liquid cleaners or abrasive materials.
- Ispezione: Controllare periodicamente la lampadina e l'apparecchio per verificare che non vi siano segni di danni o collegamenti allentati.
Risoluzione dei problemi
If your Satco S9750 LED bulb is not functioning correctly, consider the following:
- Nessuna luce:
- Controllare che l'alimentazione elettrica dell'apparecchio sia attiva.
- Ensure the bulb is screwed in tightly to the socket.
- Verify that the ballast has been properly bypassed or removed.
- Inspect the circuit breaker for any tripped circuits.
- Luce tremolante:
- Ensure the bulb is securely seated in the socket.
- Verificare la stabilità dell'alimentazione.
If issues persist after performing these checks, contact customer support.
Specifiche
| Caratteristica | Specificazione |
|---|---|
| Marca | Satco |
| Numero di modello | S9750 |
| Tipo di luce | GUIDATO |
| Cosatage | 30 Watt |
| Equivalente HID | 150 Watt |
| CFL Equivalent | 55 Watt |
| Equivalente a incandescenza | 200 Watt |
| Base della lampadina | E26 (Base media) |
| Voltage | 100-277 Volt CA |
| Temperatura del colore | 5000 gradi Celsius |
| Lumen | 3,900 lumen |
| Indice di resa cromatica (CRI) | 80 |
| Angolo del fascio | Adjustable (180°, 270°, 360°) |
| Grado di protezione IP | Grado di protezione IP65 |
| Intervallo di temperatura di esercizio | -20°C a 65°C |
| Materiale | Plastica |
| Certificazioni | ETL, RoHS, UL Listed |
| Lamp Length (closed) | 6.37 pollici |
| Diameter (closed) | 3.18 pollici |
| Diameter (open) | 7.68 pollici |
| Peso dell'articolo | 4.8 once |
Garanzia e supporto
La lampadina di ricambio Satco S9750 LED HID è dotata di un Garanzia limitata di 5 anno.
For warranty claims, technical support, or further assistance, please contact Satco customer service through their official website or the retailer where the product was purchased. Please have your model number (S9750) and proof of purchase available when contacting support.