Urmet 141212 ZAMAK Vandal-Resistant Coded Keypad Instruction Manual

1. Introduzione

This manual provides comprehensive instructions for the installation, programming, operation, and maintenance of the Urmet 141212 ZAMAK Vandal-Resistant Coded Keypad. Please read this manual carefully before installation and use to ensure proper function and safety. Keep this manual for future reference.

2. Prodotto finitoview

The Urmet 141212 is a robust, vandal-resistant coded keypad designed for access control applications. Constructed from ZAMAK, it offers enhanced durability. It features two independent relays, allowing control of two separate access points or functions. The keypad is rated IP65, indicating protection against dust and low-pressure water jets, making it suitable for outdoor use. It also complies with accessibility standards.

Figure 1: Urmet 141212 ZAMAK Vandal-Resistant Coded Keypad. This image shows the front view of the keypad, highlighting its compact design and numeric buttons.

Figure 2: IK10 Vandal Resistance Rating. This image illustrates the IK10 rating, signifying high resistance to external mechanical impacts, ensuring durability in challenging environments.

3. Istruzioni di sicurezza

• Scollegare l'alimentazione prima di eseguire qualsiasi procedura di installazione o manutenzione.
• L'installazione deve essere eseguita da personale qualificato in conformità con i codici e le normative elettriche locali.
• Do not expose the device to extreme temperatures or corrosive substances.
• Assicurarsi che tutti i collegamenti elettrici siano sicuri e adeguatamente isolati per evitare cortocircuiti.
• Utilizzare solo l'alimentatore specificato voltage.

4. Configurazione e installazione

4.1 Montaggio

Select a suitable mounting location that is flat, stable, and provides clear visibility and access for users. The keypad can be surface-mounted. Ensure adequate space for wiring connections at the back of the unit.

1. Segnare i punti di foratura sulla parete utilizzando la tastiera come modello.
2. Drill holes and insert appropriate wall plugs if necessary.
3. Secure the keypad to the wall using screws, ensuring it is level and firmly attached.

4.2 Cablaggio

The Urmet 141212 keypad requires a stable power supply and offers two relay outputs for controlling access devices such as electric strikes, magnetic locks, or gate openers. Refer to the specific wiring diagram provided with your product packaging for detailed connection points.

• Alimentazione elettrica: Connect the appropriate DC power supply (voltage specified in specifications) to the designated power input terminals. Observe polarity.
• Relè 1 Uscita: Connect to the primary access control device (e.g., main door lock). This relay typically provides Normally Open (NO) and Normally Closed (NC) contacts.
• Relè 2 Uscita: Connect to the secondary access control device or auxiliary function (e.g., gate, alarm system). This relay also typically provides NO and NC contacts.
• Exit Button (Optional): Connect an external exit button to the designated terminals if required for internal egress.

Note: Always verify wiring against the specific diagram included with your product to prevent damage or malfunction.

5. Funzionamento e programmazione

The keypad operates using a master code for programming and user codes for access. Detailed programming steps are typically found in a separate programming guide or quick start sheet provided with the product. Below are general steps for common operations.

5.1 Configurazione iniziale e codice master

1. Upon first power-up, the keypad may require initialization. Follow the instructions to set the initial master code.
2. The master code is used to enter programming mode. Keep it confidential.

5.2 Aggiunta di codici utente

1. Enter the master code followed by the programming command for adding a user code.
2. Input the new user code (typically 4-6 digits).
3. Confirm the user code.
4. Assign the user code to Relay 1, Relay 2, or both, as needed.

5.3 Eliminazione dei codici utente

1. Enter the master code followed by the programming command for deleting a user code.
2. Input the user code to be deleted.
3. Conferma l'eliminazione.

5.4 Accessing with a User Code

To gain access, simply enter a valid user code on the keypad. The corresponding relay will activate for a pre-set duration, allowing entry.

6. Manutenzione

• Pulizia: Pulisci periodicamente la superficie della tastiera con un panno morbido eamp panno. Non usare detergenti abrasivi o solventi.
• Ispezione: Regularly check for any signs of physical damage, loose connections, or wear.
• Prova di funzionalità: Periodically test all programmed user codes and relay functions to ensure proper operation.

7. Risoluzione Dei Problemi

8. Specifiche

• Modello: Urmet 141212
• Materiale: ZAMA
• Relè: 2 (indipendente)
• Grado di protezione: IP65 (a tenuta di polvere e protetto contro getti d'acqua a bassa pressione da qualsiasi direzione)
• Resistenza agli atti vandalici: IK10
• Produttore: URMET
• Data di pubblicazione su Amazon.com.be: 11 ottobre 2022

9. Garanzia e supporto

For warranty information, technical support, or service inquiries, please contact your local Urmet distributor or visit the official Urmet websito. Quando contatti l'assistenza, tieni a portata di mano il numero di modello del tuo prodotto (141212) e i dettagli dell'acquisto.