Introduzione
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ecolight Battery-Operated 6-inch LED Dual Lens Motion Utility Light. Please read this manual thoroughly before using the product to ensure proper function and safety.
Informazioni sulla sicurezza
- Assicurarsi che le batterie siano inserite con la polarità corretta.
- Non mischiare batterie vecchie e nuove o diversi tipi di batterie.
- Rimuovere le batterie se la luce non verrà utilizzata per un periodo prolungato.
- This product is designed for dry locations only. Avoid exposure to water or high humidity.
- Tenere fuori dalla portata dei bambini.
Contenuto della confezione
Verificare che tutti i componenti siano presenti prima dell'installazione:
- 1 x Ecolight 6-inch LED Motion Utility Light
- 3 batterie AA (incluse)
- 4 x Small Damage-Free Picture Hanging Command Strips by 3M
Configurazione e installazione
The Ecolight Motion Utility Light is designed for easy, flexible, and damage-free mounting using the included 3M Command Strips. No wiring is required.
Fase 1: Preparare la luce
- Rimuovere la copertura posteriore della lampada.
- Locate and remove the clear plastic tab from the battery compartment. This activates the included AA batteries.
- Riposiziona la cover posteriore.
Fase 2: preparare la superficie di montaggio
- Choose a clean, dry, and smooth surface for mounting.
- Clean the surface with rubbing alcohol and a clean cloth. Allow it to dry completely. Do not use household cleaners.
Step 3: Apply Command Strips
- Separate the two interlocking strips from each pair.
- Firmly press two strips together until they click. Repeat for all four strips.
- Remove the green liner from one side of each paired strip.
- Apply these strips to the designated flat areas on the back of the light. Press firmly.
- Remove the remaining liner from the exposed side of each strip.
Step 4: Mount the Light
- Align the light with the prepared surface.
- Press the light firmly against the surface for 30 seconds to ensure strong adhesion.
For a visual guide on installation and removal, please refer to the official product video:
Istruzioni per l'uso
The Ecolight Motion Utility Light features motion-activated operation and an auto-off timer for energy efficiency.
- Attivazione del movimento: The integrated 100-degree Passive Infrared (PIR) sensor detects motion up to 12 feet away. The light will only activate when it is dark and motion is detected, conserving battery life.
- Timer di spegnimento automatico: After the light activates and no further motion is detected, it will automatically turn off after 30 seconds.
Manutenzione
Sostituzione della batteria
When the light output diminishes, it is time to replace the batteries.
- Carefully remove the light from its mounting surface. If using Command Strips, follow the removal instructions (pull tab straight down slowly).
- Rimuovere la copertura posteriore della lampada.
- Replace the three (3) AA batteries with new ones, ensuring correct polarity (+/-).
- Riposiziona la cover posteriore.
- Re-mount the light using new Command Strips if necessary, following the installation steps.
The light is rated for 52 hours of illumination on a full battery charge.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende. | Le batterie sono scariche o installate in modo errato. | Sostituire le batterie assicurandosi che la polarità sia corretta. |
| La luce si accende durante il giorno. | Sensor is detecting insufficient ambient light. | Ensure the light is installed in an area that is sufficiently dark for motion activation. |
| Light does not detect motion reliably. | Sensor obstructed or outside detection range. | Clear any obstructions from the sensor. Ensure motion occurs within 12 feet and 100 degrees of the sensor. |
| La luce si spegne troppo velocemente. | Nessun movimento continuo rilevato entro 30 secondi. | This is normal operation. The light is designed to turn off after 30 seconds of no detected motion to conserve battery life. |
Specifiche
- Numero modello: BO1065-WHG-06LF6-E
- Dimensioni: 6 x 2.5 x 1.1 pollici (L x L x A)
- Peso dell'articolo: 6.4 once
- Fonte di energia: Battery powered (3 x AA batteries, included)
- Voltage: 4.5 Volt (CC)
- Cosatage: 6 watt
- Tipo di lampadina: GUIDATO
- Flusso luminoso: 80 lumen
- Temperatura del colore: 4000K (Bright, neutral white light)
- Sensore di movimento: 100-degree PIR sensor, detects motion up to 12 ft.
- Timer di spegnimento automatico: 30 secondi (dopo che non è stato rilevato alcun movimento)
- Lamp Vita: Fino a 30,000 ore
- Durata della batteria: Approximately 52 hours of illumination on a full charge
- Metodo di installazione: Wall-mounted (with included 3M Command Strips)
- Utilizzo: Solo posizione asciutta
- Materiale: Plastica
- Colore: Bianco
Garanzia
This Ecolight Motion Utility Light comes with a Garanzia limitata di 6 anno. For details regarding warranty coverage and claims, please refer to the product packaging or contact Good Earth Lighting customer support.
Supporto
For further assistance, technical support, or inquiries, please contact Good Earth Lighting customer service. Contact information can typically be found on the product packaging or the manufacturer's official websito.
Produttore: Buona illuminazione della Terra
Websito: Good Earth Lighting Store on Amazon