Prodotto finitoview
The VELEX Marine Digital Media Receiver (Model VX110) is designed to bring high-quality audio to your boat, power sports vehicle, or hot tub. This weather-proof unit supports Bluetooth audio streaming, AM/FM radio, USB, and auxiliary inputs, providing versatile entertainment options. Its compact design allows it to fit standard 3-inch tachometer gauge openings, making integration seamless. The unit features a crystal-clear LED display and intuitive controls for easy operation.
Figura 1: Fronte view of the VELEX Marine Stereo (Model VX110).
Configurazione e installazione
Proper installation is crucial for optimal performance and longevity of your VELEX Marine Stereo. All necessary wiring harnesses are included to facilitate the process.
Installazione fisica
The VX110 is designed to fit into standard 3-inch (8 cm) tachometer gauge openings. Ensure sufficient space behind the mounting surface for the unit and its wiring. Mounting hardware is included.
Figure 2: Product dimensions for installation (Front: 4.09 inches / 104mm, Depth: 3.43 inches / 87mm, Mounting Depth: 3.15 inches / 80mm).
Figura 3: Posteriore view of the stereo with wiring connections.
Cablaggio elettrico
Connect the stereo to your vehicle's electrical system using the provided wiring harnesses. Refer to the diagram below for correct connections. It is strongly recommended to consult a professional for installation if you are unsure about electrical wiring.
Figure 4: Electrical wiring diagram.
Filo rosso: +12V Ignition On.
filo giallo: +12V Battery Constant.
Filo nero: -12V Negative / Ground.
Figure 5: Included input cables for USB and Aux connections.
Istruzioni per l'uso
Accensione/spegnimento
- Per accendere l'unità ON, premere il tasto SRC brevemente il pulsante.
- Per accendere l'unità SPENTO, premere e tenere premuto il tasto SRC pulsante per circa 2 secondi.
Selezione della fonte
- Premere il tasto SRC button repeatedly to cycle through available audio sources: Bluetooth (BT), Radio (AM/FM), Auxiliary Input (AUX IN), and USB.
Bluetooth Pairing and Audio
- Select the "BT" source. The display will show "BT ON".
- On your mobile device, search for "VELEX" in the Bluetooth settings and pair.
- Once paired, you can stream audio from your device.
- Utilizzare il VOL+ E VOL- Pulsanti per regolare il volume.
- Utilizzare il << E >> Pulsanti per saltare le tracce avanti o indietro.
- Premere il tasto SEL pulsante per mettere in pausa o riprodurre la musica.
Funzionamento radio (AM/FM)
- Select the "RADIO" source.
- Premere il tasto BANDA pulsante per passare tra le bande FM1, FM2, FM3, AM1 e AM2.
- Utilizzare il << E >> buttons to tune to the next/previous station. Hold these buttons for auto-seek.
- To save a preset, tune to the desired station, then press and hold one of the numbered preset buttons (if available, otherwise use SEL button for settings).
Sound Settings Adjustment
- Premere il tasto SEL button repeatedly to cycle through sound settings: BASS, TREBLE, BALANCE (BAL L/R), FADER (F/R), LOUDNESS (LOUD ON/OFF), and EQUALIZER (EQ ON/OFF).
- Once a setting is displayed, use the VOL+ E VOL- pulsanti per regolare il valore.
Manutenzione e cura
- Pulizia: Utilizzare un morbido, damp panno per pulire la superficie dell'unità. Evitare detergenti abrasivi o solventi.
- Protezione dell'acqua: The unit has an IPx6 water splashing protection rating, meaning it can withstand powerful water jets. However, it is not designed for submersion. Ensure all connections are secure and sealed to maintain water resistance.
- Protezione UV: The plastic components feature a UV coating for enhanced durability against sun exposure.
- Scheda di circuito: The circuit board is conformally coated for protection in marine environments.
Guida alla risoluzione dei problemi
If you experience issues with your VELEX Marine Stereo, please refer to the table below for common problems and their solutions.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessuna alimentazione / L'unità non si accende | Cablaggio errato; fusibile bruciato; collegamento elettrico allentato. | Check all power and ground connections. Verify fuse is intact and replace if necessary. Ensure ignition wire has power. |
| Nessuna uscita audio | Volume too low; Incorrect source selected; Speaker wires disconnected; Mute function active. | Increase volume. Press SRC to select correct input source. Check speaker wiring connections. Ensure unit is not muted. |
| Bluetooth Not Connecting or Disconnecting | Dispositivo non in modalità di associazione; Interferenza; Dispositivo precedentemente associato connesso. | Ensure stereo is in Bluetooth mode ("BT ON"). Make sure your device's Bluetooth is on and discoverable. Forget the device on your phone and re-pair. Move closer to the stereo. |
| Scarsa ricezione radio | Antenna non collegata; Antenna danneggiata; Area con segnale debole. | Check antenna connection to the stereo. Inspect antenna for damage. Try tuning to stronger stations or relocate the antenna if possible. |
Specifiche del prodotto
- Modello: VX110
- Dimensioni del prodotto: 3.95 x 3.95 x 3.5 pollici (10.03 x 10.03 x 8.89 cm)
- Peso dell'articolo: 1.28 libbre (0.58 kg)
- Potenza in uscita: Peak 40W x 4 channels (160 watts total)
- Connettività: Bluetooth (A2DP support), USB 2.0, Auxiliary Input (RCA output for external amplificatore)
- Sintonizzatore: AM/FM
- Protezione dell'acqua: IPx6 (Weather-Proof)
- Display: Crystal-clear LED display
- Controlli: Silicone gel buttons
- Dispositivi compatibili: Smartphone, Tablet, Altoparlante
Garanzia e assistenza clienti
VELEX stands behind the quality of its products. The VELEX Marine Stereo (Model VX110) comes with a Promessa di qualità di 1 anni.
For technical assistance, warranty claims, or any product-related inquiries, please contact VELEX customer support. Refer to your product packaging or the official VELEX websito per le informazioni di contatto più aggiornate.
La soddisfazione del cliente è la nostra più alta priorità.