AIBOO YK-300000160

AIBOO RGB Color Changing LED Under Cabinet Lights Kit

Modello: YK-300000160

Introduzione

This instruction manual provides detailed information on the installation, operation, and maintenance of your AIBOO RGB Color Changing LED Under Cabinet Lights Kit. Designed for versatile indoor lighting, these puck lights offer vibrant color options and dimmable functionality to enhance various spaces such as kitchens, wardrobes, and furniture.

Contenuto della confezione

Verificare che tutti i componenti elencati di seguito siano inclusi nel pacchetto:

6 x LED Puck Lights (Aluminum)
1 x AC120V to DC12V Adapter
1 x 8-Way Splitter
1 x telecomando wireless RF
2 x Extension Cables (60 inches each)
1 x Interruttore On/Off
12 x nastri adesivi
12 x Viti

Components of the AIBOO LED Under Cabinet Lights Kit — Image: All components included in the AIBOO RGB LED Under Cabinet Lights Kit, laid out on a white surface. This includes six puck lights, an adapter, an 8-way splitter, an RF remote control, extension cables, an on/off switch, adhesive tapes, and screws.

Configurazione e installazione

Follow these steps to properly set up and install your AIBOO LED Under Cabinet Lights:

Disposizione del piano: Determine the desired placement for each puck light under your cabinet or furniture. Consider the length of the cables and the location of the power outlet.
Connect Puck Lights to Splitter: Connect the cables from each RGB puck light to the 8-way splitter. Ensure a secure connection for each light.
Connect Splitter to Controller: Connect the splitter to the LED controller. Pay attention to the arrow indicators on the connectors to ensure correct polarity.
Connect Controller to Adapter: Connect the LED controller to the DC12V power adapter.
Connect Adapter to Power: Plug the power adapter into a standard AC120V wall outlet.
Luci di montaggio: Use the provided adhesive tapes or screws to securely mount the puck lights in your desired locations. The aluminum housing provides good heat dissipation.

Dimensions of AIBOO LED Puck Lights and components — Image: Detailed dimensions of the puck lights (2.4 inches diameter, 0.3 inches thick), 8-way splitter (3x1.4x0.66 inches), controller (11.8 inches), on/off switch (19.7 inches), and power adapter (60 inches cable length). This helps in planning installation.

Videoguida all'installazione

For a visual guide on the connection sequence, please refer to the video below:

Video: This video demonstrates the step-by-step connection process for the AIBOO RGB LED Under Cabinet Lights, showing how to link the puck lights to the splitter, controller, and power adapter.

Istruzioni per l'uso

Your AIBOO LED Under Cabinet Lights are controlled by an RF wireless remote. This remote allows for various lighting effects and adjustments.

Funzioni del telecomando:

AIBOO RF Wireless Remote Control layout and functions — Image: The RF wireless remote control showing its buttons and their functions. It features power on/off, speed adjustment (10 levels), dynamic modes (22 types), static color selection (20 colors), and brightness adjustment (5 levels).

Accensione/spegnimento: Utilizzare il ON E SPENTO pulsanti per accendere o spegnere le luci.
Static Color Selection: Choose from 20 static colors using the color palette buttons. Note that the "white" color is a mix of red, blue, and green light, not a pure white.
Regolazione della luminosità: Adjust the brightness of static colors using the LUMINOSO + E BRIGHT - buttons (5 levels).
Modalità dinamiche: Select from 22 dynamic modes using the MODO + E MODE - pulsanti.
Regolazione della velocità: Adjust the speed of dynamic modes using the VELOCITÀ + E VELOCITÀ - buttons (10 levels).
Modalità demo: Premere il tasto DIMOSTRAZIONE button to cycle through various dynamic effects.
RF Wireless Advantage: Unlike IR remotes, the RF remote does not require direct line-of-sight and has a range of up to 49 feet.

AIBOO LED Puck Lights displaying various colors — Image: A single puck light shown changing through various RGB colors, demonstrating the color-changing capability of the lights.

Manutenzione

To ensure the longevity and optimal performance of your AIBOO LED Under Cabinet Lights, follow these simple maintenance guidelines:

Pulizia: Gently wipe the puck lights and cables with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish or electronic components.
Disconnessione dell'alimentazione: Always disconnect the power adapter from the wall outlet before performing any cleaning or maintenance.
Solo per uso interno: These lights are designed for indoor use only. Avoid exposure to moisture, high humidity, or extreme temperatures.
Gestione dei cavi: Ensure cables are not pinched or excessively bent, which could lead to damage.

Risoluzione dei problemi

If you encounter any issues with your AIBOO LED Under Cabinet Lights, refer to the following common problems and solutions:

Problema	Possibile causa	Soluzione
Le luci non si accendono.	Adattatore di alimentazione non collegato. Collegamenti allentati. Batteria del telecomando scarica o morta. Malfunzionamento del controller.	Assicurarsi che l'adattatore di corrente sia collegato saldamente a una presa funzionante. Check all cable connections (puck lights to splitter, splitter to controller, controller to adapter) for tightness. Sostituire la batteria CR2 nel telecomando. Contact customer support if the controller is suspected to be faulty.
Lights flicker or change colors erratically.	Collegamenti allentati. Interferenze da altri dispositivi RF. Problema del controllore.	Controllare tutti i collegamenti dei cavi. Move the lights or controller away from other electronic devices that might cause interference. Try resetting the controller (refer to remote pairing instructions if available, or power cycle).
Il telecomando non risponde.	Batteria scarica o scarica. Remote not paired with controller.	Sostituire la batteria CR2. To pair: Press SPEED+ and SPEED- at the same time until the lights flicker. This indicates successful pairing.
"White" color appears tinted.	Inherent design of RGB LEDs.	The white color is a mix of red, blue, and green light, not a pure white. This is normal for RGB lights. If pure white is desired, consider an RGBW set.

Specifiche

Caratteristica	Dettaglio
Marca	AIBOO
Numero di modello	Modello YK-300000160
Tipo di sorgente luminosa	GUIDATO
Colore chiaro	RGB (cambio colore)
Numero di luci	6 luci a disco
Materiale	Alluminio
Fonte di alimentazione	Elettrico con cavo
Voltage	12 Volt
Cosatage	12 Watt
Flusso luminoso	1200 lumen
Caratteristica speciale	Dimmerabile
Tipo di controllore	Telecomando senza fili RF
Uso interno/esterno	Al chiuso
Peso dell'articolo	1.1 libbre
Dimensioni del prodotto (L x P x A)	7.87 x 5.91 x 2.76 pollici
Tipo di montaggio	2-sided tape / Screws
Tipo di batteria remota	È necessaria 1 batteria CR2 (non inclusa)

Garanzia e supporto

For warranty information or technical support, please contact AIBOO Lighting directly. You can find more information and contact details on their Amazon store page:

AIBOO Lighting Amazon Store

Additionally, protection plans are available for purchase to extend coverage for your product:

Piano di protezione biennale: View Dettagli
Piano di protezione biennale: View Dettagli
Complete Protect (Monthly): View Dettagli

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.