Steinel L 240 S LED Outdoor Wall Light with Motion Sensor

1. Introduzione

Thank you for choosing the Steinel L 240 S LED Outdoor Wall Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new outdoor lighting solution. Please read these instructions carefully before beginning installation or use, and keep them for future reference.

2. Istruzioni di sicurezza

• Installazione elettrica: L'installazione deve essere effettuata da un elettricista qualificato, in conformità con le normative nazionali in materia di cablaggio e i codici elettrici locali.
• Disconnessione dell'alimentazione: Always disconnect the power supply before performing any work on the light fixture.
• Voltage: Garantire la fornitura voltage matches the specifications of the light (230 Volts).
• Danno: Do not operate the light if it is damaged. Contact customer service for assistance.
• Modifiche: Non modificare il prodotto in alcun modo. Modifiche non autorizzate potrebbero invalidare la garanzia e comportare rischi per la sicurezza.
• Ambiente operativo: This product is designed for outdoor use and is water-resistant (IP44). Do not submerge it in water.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti prima dell'installazione:

• Steinel LED Outdoor Light L 240 S
• Mounting material (4 x screws, 4 x wall plugs, 4 x spacers, 2 x securing screws, sealing plug)
• Masking plates for sensor adjustment
• Manuale di istruzioni

4. Prodotto finitoview e Caratteristiche

The Steinel L 240 S is an efficient LED outdoor wall light featuring an integrated infrared motion sensor. It provides optimal illumination for entrances and patios with a warm-white light (3000 Kelvin).

Caratteristiche principali:

• Illuminazione ottimale: Efficient Steinel LEDs provide 946 lumens of warm-white light (3000K).
• Rilevamento affidabile: 180-degree infrared sensor with a detection range of up to 10 meters.
• Lunga durata: LEDs designed for approximately 30 years of use, eliminating the need for frequent bulb replacement.
• Costruzione durevole: Impact-resistant LED wall light with a stainless steel panel.
• Sensore regolabile: Sensor can be rotated vertically by 90 degrees for precise detection area targeting.
• Impostazioni personalizzabili: Stepless adjustment of light duration and brightness (twilight threshold).
• Efficienza energetica: Contains a light source of energy efficiency class D.

5. Installazione

The Steinel L 240 S LED Outdoor Wall Light is designed for straightforward installation, similar to conventional light fixtures. However, for safety and optimal performance, professional installation by a qualified electrician is highly recommended.

Fasi di installazione:

1. Preparare il sito di installazione: Choose a suitable location on an outdoor wall. Ensure the power supply to the installation area is switched off at the main circuit breaker.
2. Segnare i punti di foratura: Use the light fixture as a template to mark the drilling points on the wall.
3. Drill Holes and Insert Plugs: Praticare dei fori nei punti contrassegnati e inserire i tasselli forniti.
4. Collegare il cablaggio: Connect the electrical wires (Live, Neutral, Earth) to the corresponding terminals in the light fixture. Ensure all connections are secure.
5. Montare l'apparecchio: Secure the light fixture to the wall using the provided screws and spacers.
6. Ripristina alimentazione: Once the light is securely mounted and wired, restore power at the main circuit breaker.

After installation, proceed to adjust the sensor settings as described in Section 7.

6. Funzionamento

The Steinel L 240 S LED Outdoor Wall Light operates automatically based on motion detection and ambient light levels. When the sensor detects movement within its detection range and the ambient light falls below the set twilight threshold, the light will switch on for the pre-configured duration.

7. Regolazione delle impostazioni

The light offers several adjustable settings to customize its behavior:

• Sensor Rotation: The infrared sensor can be rotated vertically by 90 degrees. This allows you to precisely define the detection area and avoid unwanted triggers.
• Impostazione dell'ora: Adjust the duration the light remains on after motion detection. This setting is stepless, allowing fine-tuning.
• Soglia del crepuscolo: Set the ambient brightness level at which the motion sensor becomes active. This is also a stepless adjustment.
• Masking Plates: Use the included masking plates to further restrict the sensor's detection area, for example, to exclude public pathways or neighboring properties.

8. Manutenzione

The Steinel L 240 S LED Outdoor Wall Light requires minimal maintenance.

• Pulizia: Clean the light fixture regularly with a soft, damp panno. Non utilizzare detergenti abrasivi o solventi, poiché potrebbero danneggiare la superficie.
• Durata della vita del LED: The integrated LEDs have a long lifespan (approx. 30 years), meaning there is no need to replace bulbs.
• Ispezione: Periodically check the light for any signs of damage or wear. If any issues are found, disconnect power and contact customer service.

9. Risoluzione Dei Problemi

If you experience issues with your Steinel L 240 S, refer to the following troubleshooting guide:

10. Specifiche

11. Garanzia e supporto

Steinel products are known for their quality and reliability. This product comes with a Garanzia del produttore di 3 anni, covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims.

For technical support, warranty claims, or any questions regarding your Steinel L 240 S LED Outdoor Wall Light, please contact Steinel customer service. You can find contact information on the official Steinel websito o tramite il tuo rivenditore.

Ingegneria tedesca: Designed in Germany, Steinel products are developed to provide energy efficiency, comfort, and safety.