Mount-It! MI-7940 Rolling Standing Desk Instruction Manual

Introduzione

The Mount-It! MI-7940 Rolling Standing Desk provides a flexible and mobile workspace solution. Designed for various environments such as offices, classrooms, and home study areas, this desk allows for effortless transitions between sitting and standing positions, promoting improved posture and reduced fatigue. Its multi-platform design offers ample space for essential equipment and supplies.

Figure 1: Mount-It! MI-7940 Rolling Standing Desk

Informazioni sulla sicurezza

• This product has a maximum total weight capacity of 132 libbre, with each individual shelf supporting up to 33 libbre. Do not exceed these limits to prevent damage or injury.
• Ensure the desk is stable before use, especially when adjusting height or moving it.
• Always engage the locking casters to secure the desk in place when stationary.
• Exercise caution to avoid pinching fingers or other body parts during height adjustments.
• Do not attempt to move the desk with heavy items on it, as this may compromise stability and cause damage.

Istruzioni di montaggio

Follow these steps carefully to assemble your Mount-It! MI-7940 Rolling Standing Desk. An assembly video is provided for visual guidance.

1. Attach Casters to the Base: Turn the base frame upside down. Attach the locking casters to the front end of the base (the side with the wider gap for feet when standing). Attach the regular casters to the rear. Use the provided wrench to tighten the nuts closest to the wheel to secure them. The other nut is for height adjustment.
2. Install Vertical Support Bars: Insert the vertical support bars into the base. Ensure the arms with the adjustment knobs are facing inwards, towards the center of the desk. Secure them from the bottom using the provided screws.
3. Fissare la barra trasversale: Connect the crossbar between the two vertical support bars. This piece forms the base for the lower shelves. Secure it with screws.
4. Installa il ripiano inferiore: Place the bottom shelf onto the designated supports on the base. This shelf has screw openings closer to the edge of the wood, aligning with the long leg part on the bottom. Secure with screws.
5. Installare il ripiano centrale: Position the middle shelf onto the supports above the crossbar. This shelf is designed to fit in one orientation. Secure with screws.
6. Installa il ripiano superiore: Place the top shelf onto the upper supports. This shelf also has specific cut-out holes to sit flat over the screws used for the upper arms. Secure with screws.

Figura 2: Diagramma delle caratteristiche del prodotto

Istruzioni per l'uso

Regolazione dell'altezza

The top shelves of the MI-7940 desk are adjustable through 11 locking intervals, allowing you to switch between sitting and standing positions. The height can be adjusted from Da 37.25 pollici a 54.7 pollici.

1. Sollevare: Loosen the adjustment knobs on both vertical support bars. With hands on both sides of the top platform, lift the platform upwards. You will hear a click at each locking interval. Once the desired height is reached, tighten both adjustment knobs securely.
2. Ridurre: Loosen the adjustment knobs on both vertical support bars. Lift the platform all the way up until it reaches the maximum height (indicated by a 'MAX' line). Lift it slightly further (about an inch) until the internal locks release. Slowly guide the platform downwards to your desired height. Once the desired height is reached, tighten both adjustment knobs securely.

Figura 3: Intervallo di regolazione dell'altezza

Mobilità

The desk is equipped with 1.5-inch smooth-rolling casters for easy movement across various surfaces. Two of these casters include brakes for securing the desk in a stationary position.

• Spostare: Ensure the two locking casters (located at the front of the base) are disengaged. Gently push or pull the desk to its desired location.
• Per proteggere: Una volta posizionata la scrivania, premere le leve delle due ruote girevoli bloccabili fino a sentire uno scatto. Questo impedirà alla scrivania di muoversi.

Figure 4: Caster Wheels with Locking Mechanism

Manutenzione

• Pulizia: Pulire le superfici con un panno morbido, damp stoffa. Evitare prodotti chimici aggressivi che potrebbero danneggiare la finitura.
• Elementi di fissaggio: Controllare periodicamente tutte le viti e i bulloni per assicurarsi che siano ben serrati. Serrarli nuovamente se necessario per mantenere la stabilità.
• Ruote: Per garantire un rotolamento fluido, tenere le rotelle libere da detriti.

Risoluzione dei problemi

• Desk is unstable/wobbly: Ensure all assembly screws are securely tightened. Verify that the adjustment knobs for height are fully tightened after setting the desired height. Adjust the leveling nuts on the casters if the floor is uneven.
• Difficoltà nella regolazione dell'altezza: Ensure both adjustment knobs are sufficiently loosened before attempting to raise or lower the platform. If lowering, remember to lift the platform to its maximum height first to release the internal locks.
• Le rotelle non girano fluidamente: Check for any hair or debris caught in the caster wheels. Clean as necessary. Ensure locking casters are disengaged.

Specifiche

Figura 5: Dimensioni della scrivania

Figure 6: Weight Capacity

Garanzia e supporto

The Mount-It! MI-7940 Rolling Standing Desk is covered by Mount-It!'s garanzia a vita, ensuring lasting confidence in your purchase.

For any technical assistance, questions, or support before, during, or after setup, our expert US-based technical team is ready to assist you. Please refer to the contact information provided with your product packaging or visit the official Mount-It! websito per i dettagli del supporto.