Dragonhawk LCD Dual Tattoo Machine Power Supply P076 Instruction Manual

Introduzione

This manual provides detailed instructions for the safe and efficient operation of your Dragonhawk LCD Dual Tattoo Machine Power Supply, Model P076. Please read this manual thoroughly before use to ensure proper setup and to maximize the lifespan of your equipment.

Informazioni sulla sicurezza

• Always ensure the power supply is disconnected from the main power source before connecting or disconnecting any components.
• Do not expose the power supply to moisture or extreme temperatures.
• Evitare di far cadere l'unità o di sottoporla a forti urti.
• Only use the provided power plug and compatible accessories.
• Questo dispositivo è destinato all'uso professionale da parte di personale qualificato.
• Non tentare di smontare o riparare l'unità da soli. Rivolgersi a personale qualificato.

Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

• 1 x Dragonhawk LCD Dual Tattoo Machine Power Supply (Model P076)
• 1 x Power Plug (suitable for your region)
• 1 x Dragonhawk Foot Pedal
• 1 x Clip Cord

Prodotto finitoview

The Dragonhawk P076 Power Supply is designed to provide stable and consistent power output for tattoo machines. Its compact size and user-friendly interface make it suitable for various tattooing environments.

Image: Dragonhawk P076 Power Supply shown with its retail packaging.

Caratteristiche principali:

• Quick and accurate voltage aggiustamenti.
• Smooth, consistent power output for enhanced machine reliability.
• Compact and portable design (Net Weight: 145g, Dimensions: 90*87*32.5mm).
• Sovravoltage protection for safety.
• Anti-fatigue mode for extended use.

Image: The power supply with text indicating "Mini Power", "Portable Mini", "Switch on/off", "Overvoltage protecting", "Net Weight: 145g", and "Cubage: 90*87*32.5mm".

Istruzioni di installazione

1. Connetti alimentazione: Plug the provided power plug into the power supply's input port (located at the back) and then into a suitable electrical outlet. The LCD display should illuminate.
2. Collegare il pedale: Insert the foot pedal's connector into the designated foot pedal port on the front of the power supply. This port is typically marked with a foot pedal icon.
3. Connect Clip Cord: Insert one end of the clip cord into the clip cord port on the front of the power supply. This port is typically marked with a coil machine icon or similar. Connect the other end of the clip cord to your tattoo machine.

Immagine: Frontale view of the power supply showing the two input jacks, the digital voltage display, and the rotary knob.

Immagine: Indietro view of the power supply, illustrating the power input socket and regulatory markings.

Istruzioni per l'uso

1. Accensione/spegnimento: Once connected to power, the unit is typically in standby. Press the rotary knob to turn the power supply on or off.
2. Regolazione Voltage: Rotate the knob clockwise to increase the voltage and counter-clockwise to decrease it. The current voltage verrà visualizzato sullo schermo LCD.
3. Anti-Fatigue Mode: To activate the anti-fatigue mode, press and hold the rotary knob for a few seconds. This mode allows the machine to run continuously without needing to keep the foot pedal pressed. Press the knob again to deactivate.

Image: The power supply with an illustration showing how to press the knob to switch it on/off and activate anti-fatigue mode.

Manutenzione

• Pulizia: Wipe the exterior of the power supply with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in liquids.
• Magazzinaggio: Quando non viene utilizzato, conservare l'alimentatore in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• Cura del cavo: Regularly inspect all cables (power, foot pedal, clip cord) for any signs of wear or damage. Replace damaged cables immediately.

Risoluzione dei problemi

• Nessun potere:
  • Ensure the power plug is securely connected to both the power supply and the electrical outlet.
  • Controllare che la presa elettrica funzioni.
  • Verify the power supply is switched on (press the rotary knob).
• Macchina non in funzione:
  • Check all connections: power supply to outlet, foot pedal to power supply, clip cord to power supply, and clip cord to tattoo machine.
  • Assicurare il volumetage is set appropriately for your machine.
  • If using a foot pedal, ensure it is functioning correctly.
  • If in anti-fatigue mode, ensure it is activated correctly.
• Potenza in uscita incoerente:
  • Ispezionare tutti i cavi per verificare che non vi siano danni o collegamenti allentati.
  • Ensure the power supply is on a stable surface and not overheating.

Specifiche

Garanzia e supporto

Dragonhawk provides coverage for this product. For any inquiries or support needs, please reach out through Amazon's messaging system. For video tutorials, setup guides, and professional tips, visit the official Dragonhawk YouTube channel at Youtube.com/@Dragonhawkofficial.