1. Introduzione
The SVS PB16-Ultra is a high-performance 16-inch ported cabinet subwoofer designed to deliver an exceptional bass experience. Engineered with advanced technology, this subwoofer provides unmatched low-frequency extension and output capabilities, ensuring detailed and articulate sound reproduction. It features a massive 16-inch SVS Ultra Driver with an 8-inch edge-wound voice coil, powered by a Sledge STA-1500D amplifier with 1500 watts RMS continuous power (5000 watts peak dynamic power).
This manual provides essential information for setting up, operating, and maintaining your SVS PB16-Ultra subwoofer to ensure optimal performance and longevity.
2. Informazioni sulla sicurezza
Please read and understand all safety instructions before operating your SVS PB16-Ultra subwoofer. Retain this manual for future reference.
- Sicurezza elettrica: Always connect the subwoofer to a grounded power outlet. Do not expose the unit to rain or moisture. Disconnect power before cleaning or servicing.
- Posizionamento: Ensure adequate ventilation around the subwoofer. Avoid placing it near heat sources or in direct sunlight. Position the subwoofer on a stable, level surface to prevent tipping.
- Gestione: This subwoofer is heavy (approximately 199.6 pounds). Use proper lifting techniques or seek assistance when moving the unit to prevent injury.
- Ventilazione: Do not block any ventilation openings. Overheating can cause damage to the unit.
- Pulizia: Use a soft, dry cloth for cleaning. Do not use liquid cleaners or aerosol sprays.
3. Contenuto della confezione
Verificare che tutti gli articoli siano presenti nella confezione:
- SVS PB16-Ultra 16-inch Ported Subwoofer
- Cavo di alimentazione
- Guida rapida / Manuale di istruzioni
- Protective Grille (pre-installed or separate)
4. Impostazione
4.1 Posizionamento
Proper placement of your SVS PB16-Ultra subwoofer is crucial for optimal performance. Consider the following:
- Posizionamento ad angolo: Placing the subwoofer in a corner can maximize output and create a more impactful bass response.
- Parte anteriore della stanza: Positioning the subwoofer near your front speakers can improve soundstage integration.
- Subwoofer multipli: If using multiple subwoofers, experiment with different placements to achieve the most even bass distribution throughout your listening area.
- Evitare ostacoli: Ensure the front-firing driver and ports are not obstructed. The subwoofer features a protective non-resonant steel mesh grille.

4.2 Connessioni
Connect the subwoofer to your audio system using appropriate cables. The PB16-Ultra supports wired subwoofer connectivity.
- Connect the LFE (Low-Frequency Effects) output from your AV receiver or pre-amplifier to the LFE input on the SVS PB16-Ultra.
- Plug the power cord into the subwoofer's power inlet and then into a grounded electrical outlet.
4.3 Accensione iniziale
After making all connections, switch the subwoofer to the 'On' position. The PB16-Ultra features an Auto-On/On switch with a 'green' standby mode for energy efficiency.
5. Istruzioni per l'uso
5.1 Controlli di base
The SVS PB16-Ultra can be controlled via its front panel display and buttons, or through the dedicated SVS smartphone application.

5.2 SVS Smartphone App
For advanced control and fine-tuning, download the SVS Subwoofer DSP smartphone application. This app allows you to adjust various settings from your listening position, including:
- Controllo del volume: Adjust the subwoofer's output level.
- Filtro passa basso: Set the crossover frequency to seamlessly blend the subwoofer with your main speakers.
- Controllo di fase: Adjust the phase to ensure optimal integration with other speakers.
- Equalizzatore parametrico: Fine-tune the frequency response to compensate for room acoustics and personal preferences.
- Room Gain Compensation: Optimize bass output for your specific room environment.
- Port Tuning: Adjust the port settings for different performance characteristics (e.g., deeper extension or tighter response).
- Preselezioni: Save and recall custom settings for different listening modes (e.g., music, movies).
6. Manutenzione
To ensure the longevity and optimal performance of your SVS PB16-Ultra subwoofer, follow these maintenance guidelines:
- Pulizia: Regularly wipe the cabinet with a soft, dry cloth to remove dust. Avoid abrasive cleaners or solvents.
- Cura della griglia: The protective steel mesh grille can be gently cleaned with a soft brush or vacuum cleaner attachment.
- Ventilazione: Controllare periodicamente che le aperture di ventilazione siano libere da polvere e detriti per evitare il surriscaldamento.
- Condizioni ambientali: Evitare di esporre il subwoofer a temperature estreme, umidità o luce solare diretta.
7. Risoluzione Dei Problemi
If you encounter issues with your SVS PB16-Ultra subwoofer, refer to the following common troubleshooting steps:
- Nessun suono:
- Check if the subwoofer is powered on and the power cord is securely connected.
- Verify that the audio input cables are correctly connected to both the subwoofer and your AV receiver/pre-amppiù vivace.
- Ensure the volume level on the subwoofer and your audio system is not set to minimum or muted.
- Check the low-pass filter and phase settings in the SVS app or on the control panel.
- Suono distorto:
- Reduce the volume level on the subwoofer and your audio system.
- Controllare eventuali collegamenti allentati o cavi danneggiati.
- Adjust the parametric EQ settings in the SVS app to address specific frequency issues.
- Rumori o vibrazioni:
- Assicurarsi che il subwoofer sia posizionato su una superficie stabile.
- Check for any loose objects near or on the subwoofer that might be vibrating.
- Verify that the protective grille is securely attached.
8. Specifiche
Key technical specifications for the SVS PB16-Ultra 16-inch Ported Subwoofer:
| Caratteristica | Dettaglio |
|---|---|
| Nome del modello | PB-16 |
| Numero modello articolo | PB16ULTBLK |
| Tipo di altoparlante | Subwoofer |
| Diametro subwoofer | 16 pollici |
| Diametro del woofer | 16 pollici |
| Tipo di driver audio | Driver dinamico |
| Potenza massima in uscita dell'altoparlante | 1500 Watts RMS (5000 Watts Peak Dynamic Power) |
| AmpTipo lificatore | Sledge STA-1500D with Fully Discrete MOSFET Output |
| Metodo di controllo | Applicazione |
| Tecnologia di connettività | Bluetooth, cablato |
| Caratteristica speciale | Aumento dei bassi |
| Dimensioni del prodotto | 21.7"P x 30.9"L x 25"A |
| Peso dell'articolo | 199.6 libbre |
| Colore | Impiallacciatura in rovere nero |
| Fonte di alimentazione | Elettrico con cavo |
| Ingresso volumetage | 120 Volt |
| Codice UPC | 850071005615 |

9. Garanzia e supporto
The SVS PB16-Ultra subwoofer comes with a Garanzia completa. For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official SVS websito.
SVS is known for its outstanding customer service. If you require technical assistance, have questions about setup, or need support for any issues, please contact SVS customer service directly. Their team is available to provide expert guidance and support.
For the latest support information and contact details, please visit the SVS Store on Amazon or the official SVS websito.