1. Introduzione e oltreview
The Singer Atlantic Personal 20L Room Cooler is designed to provide efficient cooling for personal spaces. This compact unit features a 20-liter water tank, three-sided honeycomb cooling pads, and castor wheels for easy mobility. It includes motorized vertical louvers for enhanced air distribution and a convenient drain plug for simplified cleaning.
Figura 1: Fronte view of the Singer Atlantic Personal 20L Room Cooler, showing the control panel and air outlet.
2. Istruzioni di sicurezza
Si prega di leggere e comprendere tutte le istruzioni di sicurezza prima di utilizzare questo apparecchio per evitare lesioni o danni.
- Always ensure the cooler is placed on a stable, level surface to prevent tipping and water spillage.
- Do not immerse the cooler, power cord, or plug in water or other liquids.
- Garantire l'alimentazione voltage corrisponde alla potenza nominale indicata sull'apparecchio.
- Unplug the cooler from the power outlet before filling or draining water, cleaning, or performing any maintenance.
- Tenere l'apparecchio fuori dalla portata dei bambini e degli animali domestici.
- Do not operate the cooler with a damaged power cord or plug. Contact customer support for repairs.
- Avoid placing objects into the air inlet or outlet grilles.
- Do not use the cooler in areas with high humidity or near flammable materials.
3. Componenti del prodotto
Familiarize yourself with the main parts of your Singer Atlantic Personal Room Cooler:
- Unità principale: The primary housing of the cooler.
- Serbatoio dell'acqua: Located at the bottom, holds up to 20 liters of water.
- Honeycomb Cooling Pads: Three-sided pads for enhanced cooling efficiency.
- Pannello di controllo: Knobs for fan speed and cooling/swing functions.
- Griglia di uscita dell'aria: Front grille with motorized vertical louvers.
- Indicatore del livello dell'acqua: Finestra trasparente sulla parte anteriore per monitorare il livello dell'acqua.
- Ruote piroettanti: Quattro ruote per un facile spostamento.
- Ingresso acqua: Located at the rear for filling water.
- Tappo di scarico: Located at the bottom rear for draining water.
Figure 2: Close-up of the control panel with 'Swing/Cool' and 'Air Flow' knobs.
Figura 3: Posteriore view of the cooler, showing the water inlet at the top and the drain plug at the bottom.
Figura 4: lato view of the cooler, highlighting the honeycomb cooling pads.
Figure 5: Lower front view showing the water level indicator and castor wheels for portability.
4. Impostazione
- Disimballaggio: Carefully remove the cooler from its packaging. Retain all packaging materials for future storage or transport.
- Posizionamento: Place the cooler on a firm, level surface. For optimal cooling, position the cooler near an open window or door to allow fresh air intake. Ensure there is adequate space around the unit for proper airflow.
- Riempire il serbatoio dell'acqua: Open the water inlet at the rear of the cooler. Fill the water tank with clean, cool water. Monitor the water level indicator on the front to ensure you do not exceed the 'MAX' mark. For enhanced cooling, you may add ice cubes to the water tank.
- Connetti alimentazione: Collegare il cavo di alimentazione a una presa elettrica da 230 V CA idonea. Assicurarsi che la presa sia correttamente messa a terra.
5. Istruzioni per l'uso
Il pannello di controllo è dotato di due manopole rotanti:
- Air Flow (Fan Speed) Knob: Controls the fan speed. Turn the knob to select from 'LO' (Low), 'MED' (Medium), or 'HI' (High) settings. Turn to 'OFF' to switch off the fan.
- Swing/Cool Knob: Controls the cooling and swing functions.
- Turn to 'SWING' to activate the motorized vertical louvers, which oscillate to distribute air across a wider area.
- Turn to 'COOL' to activate the water pump and cooling function. Water will be circulated over the honeycomb pads, providing evaporative cooling.
- Turn to 'OFF' to deactivate both cooling and swing functions.
Operare:
- Ensure the water tank is filled to an appropriate level.
- Plug in the cooler.
- Turn the 'Air Flow' knob to your desired fan speed (LO, MED, or HI).
- To activate cooling, turn the 'Swing/Cool' knob to 'COOL'. For oscillating airflow, turn it to 'SWING'. You can use both functions simultaneously by setting the knob to 'COOL' and then adjusting the 'Air Flow' knob.
- To turn off the cooler, set both knobs to 'OFF'.
6. Manutenzione
Una manutenzione regolare garantisce prestazioni ottimali e longevità del tuo frigorifero.
6.1. Daily/Weekly Maintenance
- Serbatoio dell'acqua: Regularly check the water level and refill as needed. If the cooler is not used for an extended period, drain the water completely to prevent stagnation and odor.
- Pulizia esterna: Pulire le superfici esterne con un panno morbido, damp panno. Non usare detergenti abrasivi o solventi.
6.2. Manutenzione mensile
- Scaricare l'acqua: Unplug the cooler. Locate the drain plug at the bottom rear of the unit. Remove the plug to completely drain the water tank.
- Serbatoio acqua pulita: After draining, clean the inside of the water tank with a mild detergent and water. Rinse thoroughly to remove any residue.
- Clean Honeycomb Pads: The honeycomb pads can be removed for cleaning. Gently rinse them under running water to remove dust and mineral deposits. Allow them to dry completely before reinserting.
6.3. Conservazione
Quando si ripone il frigorifero per un periodo prolungato:
- Drain all water from the tank and clean it thoroughly.
- Clean the honeycomb pads and allow them to dry completely.
- Pulire l'esterno dell'unità.
- Store the cooler in a dry, dust-free place, preferably in its original packaging.
7. Risoluzione Dei Problemi
If you encounter issues with your cooler, refer to the following table for common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Cooler does not turn on | Nessuna alimentazione Cavo di alimentazione non collegato correttamente Malfunzionamento della presa di corrente | Verificare che il cavo di alimentazione sia collegato saldamente a una presa funzionante. Prova la presa con un altro apparecchio. Controllare l'interruttore automatico domestico. |
| Nessun effetto rinfrescante | Serbatoio dell'acqua vuoto Cooling function not activated Honeycomb pads are dry | Riempire il serbatoio dell'acqua fino al livello 'MAX'. Ensure the 'Swing/Cool' knob is set to 'COOL'. Allow a few minutes for water to saturate the pads after activating cooling. |
| Perdita d'acqua | Serbatoio dell'acqua troppo pieno Tappo di scarico non chiuso correttamente Cooler not on a level surface | Do not fill water above the 'MAX' indicator. Ensure the drain plug is firmly inserted. Posizionare il frigorifero su una superficie piana e stabile. |
| Flusso d'aria debole | La velocità della ventola è impostata troppo bassa Ingresso/uscita dell'aria ostruiti Dust accumulation on pads/fan | Increase the fan speed using the 'Air Flow' knob. Ensure no obstructions are blocking the grilles. Clean the honeycomb pads and fan blades as per maintenance instructions. |
Se il problema persiste dopo aver provato queste soluzioni, contattare l'assistenza clienti.
8. Specifiche
Detailed technical specifications for the Singer Atlantic Personal 20L Room Cooler:
- Nome modello: Atlantic Personal
- Tipo: Personal Room Cooler
- Capacità: 20 litri
- Lancio in aria: 20 piedi
- Consumo energetico: 130 Watt
- Consegna aerea: Up to 1250 Cubic m/hr
- Velocità del motore: 1350 giri al minuto
- Numero di velocità della ventola: 3 (Basso, Medio, Alto)
- Voltage: 230 Volt (CA)
- Cooling Medium: Honey Comb Cooling Pads (3-sided)
- Materiale: Plastica
- Tipo di montaggio: Libera installazione
- Tipo di controlli: Manopola
- Caratteristiche speciali: 4 Castor Wheels for portability, Motorized Vertical Louvers, Drain Plug for easy cleaning, Inverter Compatible.
Figure 6: Approximate dimensions of the cooler: 41.5 cm (width) x 66.5 cm (height).
9. Informazioni sulla garanzia
This Singer Atlantic Personal 20L Room Cooler comes with a Garanzia di 1 anno on the product from the date of purchase. Please retain your purchase receipt for warranty claims. The warranty covers manufacturing defects under normal use conditions. It does not cover damage resulting from misuse, accident, unauthorized repair, or normal wear and tear.
10. Assistenza clienti
For any queries, service requests, or technical assistance, please contact Singer India Limited customer support:
- Telefono: Italiano: 18001033474 | 8860118855
- E-mail: customersupport@singerindia.com
- Websito: www.singerindia.com
- Indirizzo: Singer India Limited, Institute for Studies in Industrial Development (ISID), 3rd Floor, Block C-2-3, ISID Campus, 4, Vasant Kunj Institutional Area, New Delhi – 110070