AIBOO YK-300000197

AIBOO Linkable Under Cabinet LED Lighting System User Manual

Modello: YK-300000197

1. Introduzione

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AIBOO Linkable Under Cabinet LED Lighting System. This system features hardwired 12V slim aluminum dimmable puck lights with a wireless controller, designed for ambiance lighting in various indoor settings. Please read this manual thoroughly before installation and use.

2. Informazioni importanti sulla sicurezza

Sicurezza elettrica: This product is designed for 110V/120Vac input and requires hardwiring. Installation should be performed by a qualified electrician or an individual with intermediate knowledge of electrical wiring to prevent electric shock or fire hazards. Ensure power is disconnected at the circuit breaker before any installation or maintenance.
Nessuna presa a muro: This system does NOT include a wall plug power adapter. It is intended for direct wiring into your electrical system.
Solo per uso interno: This lighting system is designed for indoor use in dry locations. Do not expose to moisture or water.
Ventilazione: Assicurare un'adeguata ventilazione attorno al driver LED per evitare il surriscaldamento.
Compatibilità dei componenti: Use only the components provided or specified by AIBOO. Using incompatible parts may damage the system or pose a safety risk.

3. Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:

LED Puck Lights (6 units)
RF Wireless Remote Control (1 unit)
LED Controller (1 unit)
12V 1A Hardwired LED Driver (Power Adapter) (1 unit)
5ft Extension Cords (2 units)
6-Way Splitter (1 unit)
Mounting Stickers (12 units)
Viti di montaggio (12 unità)

Contents of the AIBOO Linkable Under Cabinet LED Lighting System package — **Figura 3.1: Contenuto della confezione.** This image displays all components included in the AIBOO Linkable Under Cabinet LED Lighting System: six puck lights, a remote, a controller, a 12V 1A adapter, two 5ft extension cords, a 6-way splitter, 12 stickers, and 12 screws.

4. Specifiche del prodotto

Marca	AIBOO
Numero di modello	Modello YK-300000197
Colore chiaro	Bianco diurno 6000K
Materiale	Metal (Puck Light Housing), Plastic (Shade)
Puck Light Dimensions	2.36"L x 2.36"W x 0.31"H (6 cm x 6 cm x 0.8 cm)
Fonte di alimentazione	Corded Electric (Hardwired)
Voltage	12 Volts (DC output from driver)
Tipo di sorgente luminosa	GUIDATO
Luminosità	1200 lumen (totale per 6 luci)
Caratteristiche speciali	Dimmable, Linkable, Remote Control
Metodo di controllo	Telecomando senza fili RF
Codice UPC	712411875756

Dimensions of the AIBOO LED puck lights and associated components — **Figura 4.1: Dimensioni del prodotto.** This image illustrates the dimensions of the puck lights (2.3 inches diameter, 0.3 inches thick), cable lengths, and controller/driver sizes for planning installation.

5. Configurazione e installazione

Before beginning installation, ensure the main power supply to the installation area is turned off at the circuit breaker.

5.1 Schema elettricoview

Overall wiring diagram for the AIBOO Linkable Under Cabinet LED Lighting System — **Figure 5.1: System Wiring Overview.** This diagram shows the connection flow from the hardwired LED driver to the LED controller, and then to the individual puck lights.

5.2 Hardwired Power Adapter Connection

The system includes a hardwired power adapter (LED Driver) designed to connect directly to a 110V/120Vac circuit. This adapter converts AC power to 12V DC for the LED lights. A wall plug is not included.

Disattivare l'alimentazione elettrica tramite l'interruttore generale.
Connect the input wires of the LED driver to your 110V/120Vac circuit wiring. Ensure proper polarity (live to live, neutral to neutral, ground to ground) according to local electrical codes.
Proteggere tutti i collegamenti con i connettori per cavi appropriati.

5.3 Connecting the Puck Lights

The puck lights can be connected in two primary configurations: Series Connection or Parallel Connection.

5.3.1 Collegamento in serie

In a series connection, the puck lights are linked one after another. This method is suitable for linear installations where lights are spaced evenly in a line.

Diagram showing puck lights connected in a series configuration — **Figure 5.2: Series Connection.** Lights are connected sequentially, one after another, from the LED controller.

Connect the LED controller to the output of the hardwired LED driver.
Connect the first puck light to the LED controller.
Connect the subsequent puck lights to each other using their integrated cables.
Use extension cords if additional length is required between lights.

5.3.2 Collegamento in parallelo

For installations requiring lights to branch out from a central point, the 6-way splitter allows for parallel connection.

Diagram showing puck lights connected in a parallel configuration using a 6-way splitter — **Figure 5.3: Parallel Connection.** Lights are connected to a central 6-way splitter, which then connects to the LED controller.

Connect the LED controller to the output of the hardwired LED driver.
Connect the 6-way splitter to the LED controller.
Connect individual puck lights to the available ports on the 6-way splitter.
Use extension cords if additional length is required for individual lights.

5.4 Mounting the Puck Lights

The puck lights can be mounted using either the provided screws or adhesive stickers.

Preparazione della superficie: Assicurarsi che la superficie di montaggio sia pulita, asciutta e liscia.
Montaggio adesivo: Peel the backing from the adhesive sticker and firmly press the puck light onto the desired surface. Hold for 30 seconds to ensure a strong bond.
Montaggio a vite: Use the provided screws to secure the puck lights to the surface. Pre-drilling pilot holes may be necessary depending on the material.

6. Istruzioni per l'uso

The AIBOO LED Lighting System is controlled by an RF wireless remote control.

6.1 Funzioni del telecomando

Diagram of the AIBOO remote control with button functions — **Figure 6.1: Remote Control Functions (New Version).** This image details the buttons on the remote control and their corresponding actions, including ON/OFF, brightness adjustment, pairing, and timer settings.

ACCESO/SPENTO: Premere il tasto ON pulsante per accendere le luci e il SPENTO pulsante per disattivarli.
Regolazione della luminosità:
- Premere LIGHT + or LIGHT - to gradually increase or decrease brightness (stepless dimming).
- Utilizzare il 100%, 50%, 25% pulsanti per preimpostazioni rapide della luminosità.
Abbinamento: To pair the remote with the controller, press the Paio button within 5 seconds of powering on the lights until the lights flicker.
Decoding (1 to More Pair): To pair one remote with multiple controllers, press the Decodificare button within 5 seconds of powering on the lights until the lights flicker.
Funzioni di temporizzazione: Premere 1H, 2H, 4H, O 8H to set the lights to automatically turn off after 1, 2, 4, or 8 hours, respectively.

Detailed instruction for the AIBOO remote control functions — **Figure 6.2: Remote Control Detailed Instructions.** This image provides a clear breakdown of each button's function on the remote, including ON/OFF, brightness adjustment, pairing, and timing settings.

Visual representation of 10 levels of adjustable brightness for AIBOO LED puck lights — **Figure 6.3: Adjustable Brightness.** This image demonstrates the range of 10 adjustable brightness levels, from dim to full brightness, controlled by the remote.

7. Manutenzione

The AIBOO LED Lighting System requires minimal maintenance.

Pulizia: Ensure the lights are off and cool before cleaning. Wipe the puck lights and controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Ispezione: Periodically check all connections for tightness and inspect cables for any signs of damage.
Sostituzione della batteria: The remote control requires 1 CR2 battery. Replace the battery when the remote's range decreases or it stops responding.

8. Risoluzione Dei Problemi

If you encounter issues with your AIBOO LED Lighting System, refer to the following common problems and solutions:

Problema	Possibile causa	Soluzione
Le luci non si accendono.	No power to the LED driver; Remote control battery is dead; Remote not paired; Loose connections.	Check circuit breaker. Replace remote battery. Re-pair remote (see Section 6.1). Verify all cable connections are secure.
Lights are flickering or strobing.	Too many lights connected to a single power supply; Faulty power supply.	Ensure no more than 6 lights are connected to one power supply. If flickering persists, inspect the power supply for signs of damage (e.g., warped casing, discoloration). A damaged power supply may need replacement.
Il telecomando non risponde.	Remote control battery is dead; Remote is out of range; Remote is not paired with the controller.	Replace the CR2 battery in the remote. Move closer to the LED controller. Re-pair the remote with the controller (see Section 6.1).
Lights do not dim or respond to brightness controls.	Remote not paired correctly; Controller malfunction.	Re-pair the remote (see Section 6.1). If the issue persists, contact customer support.

9. Informazioni sulla garanzia

AIBOO products are manufactured to high-quality standards. For specific warranty details regarding your Linkable Under Cabinet LED Lighting System, please refer to the warranty card included with your purchase or visit the official AIBOO websito. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

10. Assistenza clienti

For technical assistance, troubleshooting, or product inquiries, please contact AIBOO customer support.

U.S. Live Customer Support: Monday - Friday, 9 AM - 5 PM (EST)
Risorse online: Visitare il AIBOO Store on Amazon per ulteriori informazioni e supporto sul prodotto.

Illustration of customer support representatives with contact icons — **Figure 10.1: Customer Support.** This image represents the availability of customer support for assistance with product-related queries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.