Somfy 1001814

Somfy LT50 506S2 Sonesse 6Nm 32rpm 120V Motor Instruction Manual

1. Introduzione

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Somfy LT50 506S2 Sonesse 6Nm 32rpm 120V motor. Please read these instructions carefully before proceeding with any installation or operation. Retain this manual for future reference.

2. Informazioni sulla sicurezza

  • Assicurarsi che tutti i collegamenti elettrici siano eseguiti da un elettricista qualificato e siano conformi alle normative elettriche locali.
  • Scollegare l'alimentazione prima di eseguire qualsiasi procedura di manutenzione o installazione.
  • Do not allow children to operate the motor or controls.
  • Durante il funzionamento, tenere le mani e gli abiti larghi lontani dalle parti in movimento.
  • This motor is designed for specific applications. Do not use it for purposes other than those specified by Somfy.

3. Prodotto finitoview

The Somfy LT50 506S2 Sonesse motor is a tubular motor designed for various applications requiring precise and quiet operation, such as motorized blinds, shades, or projection screens. It operates at 120V and provides 6Nm of torque at 32 RPM.

Somfy LT50 506S2 Sonesse Motor

Figura 3.1: Generale view of the Somfy LT50 506S2 Sonesse Motor.

Motor end cap detail

Figure 3.2: Detail of the motor's end cap, showing the output shaft connection point.

Motor with drive and mounting components

Figure 3.3: The motor shown with typical drive and mounting components (accessories not included).

4. Configurazione e installazione

Installation of the Somfy LT50 506S2 Sonesse motor requires careful attention to detail and adherence to electrical safety standards. It is recommended that installation be performed by a professional installer.

4.1 Componenti richiesti (non inclusi)

Please note that essential accessories such as the crown, drive, and mounting plate are not included with the motor and must be acquired separately to complete the installation.

4.2 Collegamento elettrico

The motor includes a power cord for connection to a 120V power supply. Ensure the power supply is disconnected before making any connections. Follow the wiring diagram provided with your specific application or consult a qualified electrician.

4.3 Montaggio

Mount the motor securely within its intended housing or bracket. Ensure the motor is level and properly aligned with the driven component (e.g., shade tube). Refer to the specific mounting instructions for your application.

4.4 Impostazione dei limiti

After physical installation and electrical connection, the motor's upper and lower travel limits must be set. Consult the specific instructions for your control system (e.g., remote control, wall switch) to program these limits accurately.

5. Istruzioni per l'uso

Once installed and limits are set, the motor can be operated using a compatible Somfy control device (e.g., remote, wall switch, smart home system). Refer to your control device's manual for specific operating procedures.

  • Su/Apri: Press the 'Up' or 'Open' button to raise the blind/shade or open the screen.
  • Giù/Chiudi: Press the 'Down' or 'Close' button to lower the blind/shade or close the screen.
  • Stop/My: Press the 'Stop' or 'My' button to halt the motor at any desired position. The 'My' button can also be programmed for a favorite intermediate position.

6. Manutenzione

The Somfy LT50 506S2 Sonesse motor is designed for long-term, maintenance-free operation. However, periodic checks can help ensure optimal performance.

  • Pulizia: Keep the motor area clean and free from dust and debris. Do not use abrasive cleaners or solvents.
  • Ispezione: Periodically inspect the power cord for any signs of damage. Ensure all mounting hardware remains secure.
  • Lubrificazione: Il motore è lubrificato in fabbrica e non necessita di ulteriore lubrificazione.

7. Risoluzione Dei Problemi

Se riscontri problemi con il motore, fai riferimento ai seguenti passaggi comuni per la risoluzione dei problemi:

ProblemaPossibile causaSoluzione
Il motore non rispondeNessuna alimentazione
Faulty control device
Protezione da sovraccarico motore attivata
Controllare il collegamento elettrico e l'interruttore automatico
Test with another control device if available
Allow motor to cool down (if it has been running continuously)
Motor runs but blind/shade does not moveDrive or crown not properly engaged
Ostruzione
Verify proper installation of drive and crown
Check for any physical obstructions
Motor stops prematurely or limits are incorrectLimits incorrectly setRefer to your control device manual to reset the motor limits

If the problem persists after attempting these solutions, please contact Somfy customer support or a qualified technician.

8. Specifiche

SpecificazioneValore
Marcasofficissimo
Numero di modello1001814
Velocità32 giri al minuto
Voltage120 Volt
ProduttoreSOMFY
Codice UPC685248788080
ASINB01N7NITLC
Codice GTIN685248788080

9. Informazioni sulla garanzia

The Somfy LT50 506S2 Sonesse motor comes with a Garanzia di 5 anno. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Somfy websito o contattare l'assistenza clienti.

10. Supporto

For further assistance, technical support, or to inquire about accessories, please visit the official Somfy websito o contattare il servizio clienti. Puoi trovare le informazioni di contatto sul Negozio Somfy su Amazon or directly on the manufacturer's websito.

© 2026 Somfy. Tutti i diritti riservati.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.