Introduzione
This manual provides essential information for the safe installation, operation, and maintenance of your Heathco HZ-5846-WH Motion Activated LED Security Light. This fixture is designed to provide reliable outdoor lighting with energy-efficient LED technology and motion detection capabilities. Please read these instructions thoroughly before installation and retain them for future reference.
Image: Heathco HZ-5846-WH Motion Activated LED Security Light, showing the two adjustable lamp heads and the motion sensor below.
Informazioni sulla sicurezza
AVVERTIMENTO: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electrical Code (NEC).
- Questo prodotto deve essere installato da un elettricista qualificato.
- Garantire la fornitura voltage is 120 VAC, 60 Hz.
- Non tentare di smontare o modificare l'apparecchio. All'interno non sono presenti parti riparabili dall'utente.
- Avoid looking directly into the LED light source when illuminated, as this may cause eye damage.
- Mount the fixture securely to a structural surface.
Configurazione e installazione
The Heathco HZ-5846-WH security light is designed for either wall mount or eave mount installation. Ensure the mounting location provides adequate coverage for the desired detection area and is within reach of the electrical supply.
Fasi di installazione:
- Disconnessione dell'alimentazione: Turn off power at the circuit breaker or fuse box before beginning installation.
- Posizione di montaggio: Select a suitable wall or eave location. The fixture should be mounted at a height that allows for optimal motion detection and light coverage.
- Cablaggio: Connect the fixture's wires to the household wiring according to local electrical codes. Typically, this involves connecting the black wire to live, white wire to neutral, and green/bare copper wire to ground.
- Dispositivo sicuro: Mount the fixture securely to the junction box or mounting surface using the provided hardware.
- Regola Lamp Testine e sensore: Il lamp heads and motion sensor are tool-free adjustable. Position them to cover the desired area.
- Ripristino dell'energia: Una volta completata l'installazione e verificati tutti i collegamenti, ripristinare l'alimentazione tramite l'interruttore automatico.
Istruzioni per l'uso
Your Heathco HZ-5846-WH security light features a 180-degree motion detection zone and adjustable settings for optimal performance.
Regolazione del sensore di movimento:
- Allineare: The motion sensor can detect movement up to 40 feet. Adjust the sensor's angle to modify the detection range and area. Avoid pointing the sensor at heat sources or moving objects (e.g., trees, traffic) that could cause false triggers.
- Puntuale: The light-on time can be adjusted up to 5 minutes. Use the control dial (if present, typically on the sensor unit) to set how long the light remains illuminated after motion is detected.
Sostituzione manuale:
This fixture includes a manual override function. To activate the manual override, quickly turn the light switch OFF then ON. The light will remain ON continuously. To return to motion-activated mode, quickly turn the light switch OFF then ON again. The light will then operate based on motion detection.
Manutenzione
The Heathco HZ-5846-WH security light utilizes energy-saving LED technology, meaning you will never need to change a bulb.
- Pulizia: To maintain the appearance and performance of your fixture, periodically clean the lens and housing with a soft, damp panno. Non usare detergenti abrasivi o solventi.
- Ispezione: Ispezionare periodicamente l'apparecchio per verificare la presenza di eventuali danni o collegamenti allentati. In caso di problemi, scollegare l'alimentazione e consultare un elettricista qualificato.
Risoluzione dei problemi
If your security light is not functioning as expected, refer to the following common issues and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende. | No power; faulty wiring; sensor not detecting motion. | Check circuit breaker; verify wiring connections; adjust sensor angle and range. |
| La luce rimane accesa continuamente. | Manual override activated; constant motion in detection zone; faulty sensor. | Toggle power switch to reset manual override; reposition sensor; contact support if sensor is faulty. |
| Light turns ON/OFF frequently. | Sensor detecting unwanted motion (e.g., trees, traffic, animals). | Adjust sensor angle and sensitivity to exclude unwanted motion sources. |
| Il raggio di rilevamento è scarso. | Sensore ostruito o puntato in modo errato. | Clear obstructions; adjust sensor angle for optimal coverage. |
Se le procedure di risoluzione dei problemi non risolvono il problema, contattare l'assistenza clienti.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | HZ-5846-WH |
| Marca | Globo elettrico |
| Sorgente luminosa | LED integrato |
| Luminosità | 1250 lumen |
| Temperatura del colore | 5296 gradi Celsius |
| Cosatage | 13.73 Watt |
| Angolo di rilevamento del movimento | 180 gradi |
| Intervallo di rilevamento del movimento | Fino a 40 piedi |
| Tempo di accensione regolabile | Fino a 5 minuti |
| Fonte di alimentazione | Corded Electric (120 VAC, 60 Hz) |
| Materiale | Polycarbonate (Shade), Metal (Fixture) |
| Tipo di montaggio | Wall Mount or Eave Mount |
| Livello di resistenza all'acqua | Impermeabile |
| Dimensioni (L x P x A) | 7.54" x 6.79" x 6.22" |
| Peso dell'articolo | 1.9 libbre |
| Codice UPC | 016963158467 |
Image: Dimensions of the Heathco HZ-5846-WH security light, showing length (7.54"), width (6.79"), and height (6.22").
Garanzia e supporto
Informazioni sulla garanzia:
The manufacturer warranty description for this product is Non applicabile. Please refer to your retailer's return policy for details regarding returns or exchanges.
Assistenza clienti:
For further assistance, technical support, or inquiries regarding your Heathco HZ-5846-WH Motion Activated LED Security Light, please contact Globe Electric customer service. Refer to the product packaging or the Globe Electric websito per informazioni di contatto aggiornate.