FreedConn TCOM VB Bluetooth Motorcycle Intercom User Manual

1. Introduzione

This manual provides instructions for the installation, operation, and maintenance of your FreedConn TCOM VB Bluetooth Motorcycle Intercom. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Caratteristiche principali

• Bluetooth V5.0 for stable connectivity.
• Intercom communication for 2-3 riders with an 800m range.
• Universal pairing with most Bluetooth headsets.
• Hands-free calling for mobile phones.
• Stereo music playback and music sharing with a passenger.
• Radio FM integrata.
• CVC noise reduction technology for clear audio.
• Classificazione impermeabile IP65.
• LCD screen for easy information display.
• Long battery life: up to 10 hours talk time, 7 hours intercom, 300 hours standby.

Immagine: Oltreview of FreedConn TCOM VB Intercom key features.

3. Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

• TCOM-VB Main Unit (x2 for this package)
• Boom Microphone / Button Microphone (x2 sets)
• Speaker Pads (x12)
• Clip Bracket (x2)
• Supporto adesivo 3M (x2)
• Chiave a brugola (x2)
• Cavo dati USB (x2)
• Manuale utente (x1)

Image: Contents of the FreedConn TCOM VB package.

4. Configurazione e installazione

4.1 Montaggio dell'unità interfonica

The TCOM VB unit can be mounted using either the clip bracket or the adhesive mount.

1. Scegli la posizione: Select a suitable flat surface on the left side of your helmet.
2. Clip Bracket Installation:
   • Loosen the screws on the clip bracket.
   • Slide the bracket between the helmet shell and the inner padding.
   • Tighten the screws to secure the bracket.
3. Installazione con supporto adesivo:
   • Clean the helmet surface thoroughly.
   • Peel off the protective film from the 3M adhesive mount.
   • Premere saldamente il supporto sulla superficie del casco per almeno 30 secondi. Lasciare asciugare l'adesivo per 24 ore prima dell'uso.
4. Collegare l'unità principale: Slide the TCOM VB main unit onto the installed bracket until it clicks into place.

4.2 Installazione di altoparlanti e microfono

Installa gli altoparlanti e il microfono all'interno del casco.

1. Posizionamento dei relatori: Attach the speakers to the inside of the helmet, aligning them with your ears. Use the provided speaker pads for comfort and optimal sound.
2. Selezione del microfono: Choose between the boom microphone (for open-face helmets) or the button microphone (for full-face helmets).
3. Posizionamento del microfono: Position the microphone close to your mouth for clear voice transmission.
4. Collegare i cavi: Plug the speaker and microphone cables into the corresponding ports on the TCOM VB main unit.

Image: Hard and soft cable microphone options for helmet installation.

Image: Step-by-step installation guide for the intercom unit.

5. Istruzioni per l'uso

5.1 Accensione/spegnimento

• Accensione: Press and hold the Power button for approximately 3 seconds until the blue indicator light flashes.
• Spegni: Press and hold the Power button for approximately 3 seconds until the red indicator light flashes and the unit powers down.

5.2 Accoppiamento Bluetooth (telefono/GPS)

To connect your TCOM VB to a mobile phone or GPS device:

1. Ensure the TCOM VB unit is powered off.
2. Press and hold the Power button for approximately 5-7 seconds until the red and blue indicator lights flash alternately. This indicates pairing mode.
3. On your phone or GPS, enable Bluetooth and search for new devices.
4. Select "FreedConn TCOM VB" from the list of available devices.
5. Se richiesto, immettere il PIN "0000".
6. Once paired, the blue indicator light will flash slowly.

Image: Bluetooth pairing with smartphone and GPS.

5.3 Intercom Pairing and Communication

The TCOM VB supports intercom communication for up to 3 riders, with 2 riders communicating simultaneously.

1. Pairing Two Units (A & B):
   • Ensure both units A and B are powered off.
   • Press and hold the Power button on both units A and B simultaneously for 5-7 seconds until they enter pairing mode (red and blue lights flash alternately).
   • Press the Power button on either unit A or B once. The units will search and pair with each other. Once paired, the blue light will flash slowly on both.
2. Pairing Three Units (A, B, & C):
   • First, pair units A and B as described above. Turn off both A and B after successful pairing.
   • Next, pair units B and C. Turn off both B and C after successful pairing.
   • To initiate a 3-way intercom: Power on all three units. Press the Power button on unit C once to connect to B. Then, press the Power button on unit B once to connect to A. All three units should now be connected.
3. Initiate Intercom Call: After pairing, a short press of the Power button will initiate or end an intercom call.

Image: 3 riders pairing, 2 riders intercom at the same time.

Image: Universal pairing feature.

5.4 Funzioni del telefono

• Rispondi alla chiamata: Premere brevemente il pulsante Telefono.
• Termina chiamata: Premere brevemente il pulsante Telefono.
• Rifiuta chiamata: Tenere premuto il pulsante Telefono per 2 secondi.
• Ricomponi l'ultimo numero: Premi due volte il pulsante Telefono.
• Voice Assistant (Siri/S-Voice): Short press the Voice Assistant button (if available) or a specific button combination as per your device's manual.

5.5 Riproduzione di musica

• Riproduci/Pausa: Premi brevemente il pulsante Riproduci/Pausa.
• Traccia successiva: Short press the "Next" button or rotate the multi-function knob clockwise.
• Traccia precedente: Short press the "Previous" button or rotate the multi-function knob counter-clockwise.
• Condivisione di musica: While playing music, activate the music sharing function (refer to specific button combination in the full manual) to share audio with a paired intercom unit.

Image: Music sharing with a partner.

5.6 Radio FM

• Accendere/spegnere la radio FM: Tenere premuto il pulsante FM per 2 secondi.
• Stazioni di scansione: Short press the "Next" or "Previous" button to scan for available FM stations.

Image: Built-in FM Radio feature.

5.7 Controllo del volume

Adjust the volume using the multi-function knob or dedicated volume buttons (if present).

• Aumenta volume: Rotate the multi-function knob clockwise or press the Volume Up button.
• Diminuisci volume: Rotate the multi-function knob counter-clockwise or press the Volume Down button.

6. Manutenzione

• Pulizia: Pulire l'unità con un panno morbido, damp stoffa. Non utilizzare prodotti chimici aggressivi o detergenti abrasivi.
• Resistenza all'acqua: The unit is IP65 waterproof, meaning it is protected against low-pressure water jets from any direction. It is not designed for submersion. Ensure the USB port cover is securely closed when not charging.
• Ricarica: Charge the unit using the provided USB cable. A full charge takes approximately 2.5 hours. The indicator light will change to indicate charging status (e.g., red during charging, blue when fully charged).
• Magazzinaggio: Conservare l'unità in un luogo fresco e asciutto quando non viene utilizzata per lunghi periodi.

Image: Battery life and waterproof features.

7. Risoluzione Dei Problemi

Nota: If your two speakers or one side speaker are not working, ensure the headset cable is completely inserted into the interface and that the speaker is inserted into the correct port. If the volume is low, adjust the speaker placement as close to your ears as possible.

8. Specifiche

9. Garanzia e supporto

Per informazioni sulla garanzia e supporto tecnico, fare riferimento al sito ufficiale FreedConn webo contattare il distributore locale. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

For common issues, please consult the troubleshooting section of this manual or the online FAQ resources provided by FreedConn.