Mount-It! Full Motion TV Wall Mount (MI-2042) Instruction Manual

Introduzione

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Mount-It! MI-2042 Full Motion TV Wall Mount. This universal wall mount is designed for 19 to 40-inch TVs and computer monitors, supporting VESA 75x75mm and 100x100mm patterns. It offers full motion capabilities including tilt, swivel, and extension up to 15 inches, allowing for optimal viewangoli di inclinazione.

Figure 1: Mount-It! MI-2042 Full Motion TV Wall Mount with a television attached.

Informazioni sulla sicurezza

• Read all instructions before installation. If you have any questions, contact customer support.
• Assicurarsi che la superficie di montaggio possa sostenere in modo sicuro il peso combinato del supporto e del display.
• Non superare la capacità di peso massima di 33 libbre (15 kg).
• Use only the provided hardware. Do not use parts not supplied by the manufacturer.
• Un'installazione non corretta può provocare danni materiali o lesioni personali.
• Per evitare lesioni o danni, l'installazione deve essere sempre effettuata da due persone.
• Questo prodotto è destinato esclusivamente all'uso in ambienti interni.

Contenuto della confezione

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Mount-It! customer service.

Configurazione e installazione

Follow these steps for secure installation of your wall mount. It is recommended to have two people for this process.

1. Verify VESA Compatibility: Check the back of your TV or monitor for the four mounting holes. Measure the horizontal and vertical distance between these holes. This mount supports VESA patterns of 75x75mm and 100x100mm (3x3 inches or 4x4 inches).


Figure 2: VESA compatibility check for your display.

2. Attach VESA Plate to Display: Secure the VESA plate to the back of your TV or monitor using the appropriate screws and washers from the provided hardware kit. Ensure a snug fit without overtightening.


Figure 3: Attaching the VESA plate to the display.

3. Montare la piastra a muro sulla parete:
   • Locate a suitable mounting position on a wall stud or solid concrete/brick wall.
   • Mark the drill holes for the wall plate.
   • Drill pilot holes according to the instructions for your wall type (wood stud or concrete).
   • Secure the wall plate to the wall using the provided lag bolts and washers. Ensure it is level and firmly attached.
4. Attach Display to Wall Mount: Carefully lift the TV/monitor (with the VESA plate attached) and slide it onto the articulating arm's socket on the wall plate assembly. Ensure it clicks securely into place.


Figure 4: Attaching the display to the wall mount.

5. Regola l'angolo di inclinazione: Loosen the tilt adjustment knob, set the desired tilt angle, and then tighten the knob to secure the display.

Istruzioni per l'uso (Regolazioni)

The Mount-It! MI-2042 offers versatile adjustments for optimal viewing.

• Estensione: The articulating arm allows the display to extend from 1.75 inches (minimum) to 15 inches (maximum) from the wall. Gently pull or push the display to achieve the desired distance.


Figure 5: Display extension from the wall.

• Inclinazione: The mount allows for a tilt range of up to 15 degrees up or down. Loosen the tilt knob, adjust the screen to your preferred vertical angle, and then re-tighten the knob.
• Girevole: The mount provides 180 degrees of swivel at each joint, allowing you to angle the screen left or right. Gently push the display to the desired horizontal viewposizione di avanzamento.
• Rotazione: The VESA plate can rotate 360 degrees, enabling you to switch between landscape and portrait orientation for your display.


Figure 6: Tilt and rotation capabilities.


Figure 7: Swivel and rotation points on the mount.

Manutenzione

Una manutenzione regolare garantisce la longevità e il funzionamento sicuro del supporto da parete.

• Pulizia: Pulisci il supporto con un panno morbido eamp panno per rimuovere polvere e sporco. Evitare prodotti chimici aggressivi o detergenti abrasivi.
• Ispezione: Controllare periodicamente tutte le viti e i collegamenti per assicurarsi che siano ben serrati e sicuri. Serrare nuovamente se necessario.
• Lubrificazione: If joints become stiff, apply a small amount of silicone-based lubricant to the moving parts.

Risoluzione dei problemi

In caso di problemi, fare riferimento ai seguenti problemi comuni e alle relative soluzioni.

Specifiche

• Numero modello: MI-2042
• Compatible TV/Monitor Sizes: Da 19 a 40 pollici
• Compatibilità VESA: 75x75mm, 100x100mm
• Capacità di peso: 33 libbre (15 kg)
• Estensione dal muro: Da 1.75 pollici (min) a 15 pollici (max)
• Angolo di inclinazione: Up to 15 degrees (up/down)
• Girevole: 180 degrees at each joint
• Rotazione: 360 degrees (landscape to portrait)
• Materiale: Ferro
• Colore: Nero
• Peso dell'articolo: 2.52 libbre
• Dimensioni della confezione: 12.6 x 9.17 x 1.65 pollici

Figure 8: Dimensional specifications of the wall mount.

Informazioni sulla garanzia

For detailed warranty information regarding your Mount-It! MI-2042 Full Motion TV Wall Mount, please refer to the official Mount-It! weboppure contatta direttamente l'assistenza clienti. Conserva la ricevuta d'acquisto come prova d'acquisto.

Assistenza clienti

If you require further assistance, have questions about installation, or need to report a missing/defective part, please visit the official Mount-It! website for contact information or their support portal.