Introduzione
Thank you for choosing the SOAIY Touch LED Night Light. This manual provides detailed instructions for the safe and efficient use of your new lights. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Informazioni sulla sicurezza
- Use only AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.
- Ensure batteries are inserted with correct polarity (+/-). Incorrect insertion can cause damage.
- Remove batteries if the light will not be used for an extended period to prevent leakage.
- Do not expose the light to water or excessive moisture. This product is designed for indoor use only.
- Tenere fuori dalla portata dei bambini piccoli per evitare rischi di soffocamento dovuti a piccole parti o batterie.
Contenuto della confezione
Verifica che tutti gli articoli siano presenti nel tuo pacco:
- 3 x SOAIY Touch LED Night Lights
- 3 x 3M Double-sided Adhesive Pads
- 6 x Metal Plates (for magnetic mounting)
Note: 3 AAA batteries are required per light (total 9 AAA batteries for a 3-pack) and are not included.
Image: Package contents showing three SOAIY Touch LED Night Lights, 3M adhesive pads, and metal plates.
Impostare
1. Installazione della batteria
- Hold the edge of the light with your fingers.
- Place your other palm on the back cover.
- Press slightly and twist the back cover counter-clockwise to open.
- Inserire 3 batterie AAA, assicurandosi della corretta polarità.
- Align the back cover with the light and twist clockwise to close securely.
Image: Visual guide for opening the light and installing batteries.
2. Opzioni di montaggio
The SOAIY Touch LED Night Light offers two primary mounting methods:
- Attacco magnetico diretto: The light has a built-in magnet and can directly attach to any metal surface (e.g., refrigerators, metal cabinets).
- Adhesive Mounting with Metal Plate: For non-metal surfaces, use the provided 3M adhesive pads and metal plates.
- Clean the desired mounting surface to ensure it is dry and free of dust.
- Peel the protective film from one side of a 3M adhesive pad and attach it to a metal plate.
- Peel the protective film from the other side of the adhesive pad and firmly press the metal plate onto the cleaned surface.
- Attach the light magnetically to the installed metal plate. This allows for easy removal for battery changes.
Image: Mounting options illustrating direct magnetic attachment and use of 3M adhesive with metal plates.
Istruzioni per l'uso
1. Accensione/spegnimento
To turn the light on or off, simply touch the center of the light's surface. A soft touch will toggle the power state.
Image: One-touch functionality for turning the light on and off.
2. Stepless Dimming and Brightness Memory
The light features stepless dimming and a brightness memory function:
- Per regolare la luminosità: Long press the touch button. The brightness will gradually increase or decrease. Release your finger when the desired brightness level is reached.
- Memoria di luminosità: The built-in memory chip will remember the last brightness setting you selected, so the light will turn on at that level next time.
Image: Demonstrating the long-press function for stepless dimming.
Manutenzione
1. Sostituzione della batteria
When the light begins to dim or fails to turn on, it's time to replace the batteries. Follow the battery installation steps in the Setup section to replace the 3 AAA batteries.
2. Pulizia
To clean the light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or immerse the light in water.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende. | Batterie scariche o installate in modo errato. | Controllare la polarità delle batterie e sostituirle con batterie AAA nuove. |
| La luce è fioca. | Batteria scarica. | Sostituire le batterie con batterie AAA nuove. |
| La luce non si attenua. | Non esegue una pressione prolungata. | Ensure you are long-pressing the touch surface to activate dimming. |
| La luce cade dalla superficie di montaggio. | Improper surface preparation or weak adhesive. | Clean surface thoroughly before applying adhesive. Replace adhesive pad if necessary. Ensure metal plate is securely attached for magnetic mounting. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Allora, dai |
| Nome del modello | SOAIY Touch Light Battery Powered Ultra-Thin Touch Sensor LED Cabinet Lights, Magnet Stick-on Closet Light, LED Tap Night Lights |
| Tipo di sorgente luminosa | LED (6 SMD LEDs) |
| Temperatura del colore | 5000K (Cool White Light) |
| Luminosità | 36 lumen |
| Fonte di alimentazione | 3 x batterie AAA (non incluse) |
| Metodo di controllo | Touch (On/Off, Dimmable) |
| Caratteristica speciale | Dimmable, Brightness Memory, Magnetic Mounting |
| Dimensioni del prodotto | 3.1 cm L x 3.1 cm P x 0.8 cm A |
| Materiale | Plastica |
| Uso interno/esterno | Al chiuso |
Image: Product dimensions highlighting the ultra-thin design.
Image: Light color temperature information, indicating 5000K neutral white light.
Applicazioni
The SOAIY Touch LED Night Light is versatile and suitable for various indoor locations:
- Armadi e guardaroba
- Under Cabinets (Kitchen, Bathroom)
- Hallways and Stairwells
- Bedrooms (as a nightstand light)
- Drawers and Bookcases
- Home Bars and Safe Boxes
Immagine: Examples of the light in use in different household areas.
Garanzia e supporto
SOAIY products are designed for quality and reliability. For any issues or questions regarding your Touch LED Night Light, please contact SOAIY customer support. Refer to the product packaging or the official SOAIY website for contact information and specific warranty details.