BEMIS Renew Plus Bidet Cleansing Spa with Night Light - Round White User Manual

Introduzione

This manual provides comprehensive instructions for the installation, operation, and maintenance of your BEMIS Renew Plus Bidet Cleansing Spa. Designed for superior hygiene and comfort, this bidet seat offers advanced features for a refreshing experience.

Figure 1: BEMIS Renew Plus Bidet Cleansing Spa (Top View)

Informazioni sulla sicurezza

AVVERTENZA: per ridurre il rischio di ustioni, elettrocuzione, incendio o lesioni alle persone:

• Ensure the bidet is connected to a GFCI (Ground Fault Circuit Interrupter) protected outlet.
• Non immergere i componenti elettrici in acqua o altri liquidi.
• Unplug the bidet from the outlet before cleaning or servicing.
• Non consentire ai bambini o alle persone con ridotte capacità fisiche, sensoriali o mentali di utilizzare il bidet senza supervisione.
• Utilizzare il prodotto solo per l'uso previsto, come descritto nel presente manuale.

Contenuto della confezione

Prima di iniziare l'installazione, verificare che tutti i componenti siano presenti:

• BEMIS Renew Plus Bidet Cleansing Spa
• Remote Control with Magnetic Holder
• 4 batterie AAA
• Cartuccia deodorante
• Installation Hardware (2 bolts, 2 hinge brackets, 2 cone washers, 2 flat washers, 2 nuts, 1 seat bracket)
• Tubo per bidet
• 7/8-inch T-Valve
• 4-foot Power Cord (attached to unit)
• Tightening Tool (optional for installation)

Figura 2: parte inferiore View of Bidet Seat

Configurazione e installazione

Follow these steps for proper installation of your bidet seat. It is recommended to watch the installation video for visual guidance.

1. Preparare il bagno: Turn off the water supply to the toilet and drain the tank by holding down the flush handle until empty. Place a container under the connecting hose to catch any residual water.
2. Rimuovi posto esistente: Detach the existing toilet seat and lid.
3. Installare la valvola a T: Disconnect the existing water supply line from the toilet tank's water supply fitting. Secure the 7/8-inch T-valve to the toilet tank water supply fitting. Ensure the T-valve is installed at the bottom of the toilet tank, not at the wall.
4. Collegare la linea di alimentazione idrica: Collegare la linea di alimentazione dell'acqua proveniente dalla parete al fondo della valvola a T.
5. Install Seat Bracket: Place the adjustable seat bracket over the toilet mounting holes. Insert the metal hinge brackets (flat side down) into the large openings of the seat bracket.
6. Inserire i bulloni: Insert the bolts through the hinge brackets and mounting holes. The square bolt head should be even with the sides of the metal hinge brackets.
7. Bulloni di sicurezza: From underneath the toilet bowl, slide the rubber cone washer, flat washer, and nut onto the bolts. Lightly tighten to keep the seat bracket in place.
8. Fissare il sedile del bidet: Set the bidet seat on the bowl in front of the mounted bracket. Push the seat backward onto the bracket until it clicks into place.
9. Regola allineamento: Adjust the seat forward and backward for proper alignment with the toilet bowl.
10. Serraggio finale: Either finger-tighten the nuts from below or use the provided tightening tool to fully secure the seat to the bowl.
11. Connect Bidet Hose: Attach the bidet hose to the T-valve. If using an optional filter (sold separately), position it onto the T-valve first, then attach the bidet hose to the other end of the filter. If not using a filter, attach the bidet hose directly to the T-valve.
12. Connect to Bidet Seat: Attach the other end of the bidet hose to the connection on the bidet seat, ensuring it is firmly secured.
13. Install Deodorizing Cartridge (Renew Plus only): For the Renew Plus seat, install the deodorizing cartridge into the designated slot on the side of the seat.
14. Ripristinare l'approvvigionamento idrico: Slowly turn on the water supply to the toilet. Check all connections for leaks immediately and again after 5 minutes.
15. Connetti alimentazione: Plug the power cord into a GFCI protected electrical outlet.

Figure 3: Precision Seat Fit for proper alignment.

Istruzioni per l'uso

Your BEMIS Renew Plus Bidet Cleansing Spa offers a range of features for personalized comfort and hygiene. All functions are controlled via the intuitive touch remote control.

Funzioni del telecomando:

Figure 4: Remote Control for BEMIS Renew Plus Bidet.

• Aerated Wash with Continuous Heated Water: Adjust water temperature and pressure for a comfortable and thorough clean.
• Stainless Steel Nozzle: Provides options for a soft wash (gentle clean) or intense wash (deeper cleaning).
• Pulsate Function: Automatically transitions from a soft to strong wash for enhanced cleaning.
• Oscillate Function: (Renew Plus exclusive) Provides a massaging forward and backward cleansing motion.
• Multi-Setting Warm Air Dryer: (Renew Plus exclusive) Features 5 temperature settings for efficient drying.
• Sedile riscaldato: Offers 4 temperature settings for personalized warmth and comfort.
• iLumaLight Night Light: (Renew Plus exclusive) Blue LED night light provides soft illumination and automatically shuts off when bathroom lights are on.
• Deodorante automatico: (Renew Plus exclusive) Features a replaceable carbon filter to neutralize odors.
• Preimpostazioni utente: The remote allows for saving customized settings for two users for everyday convenience.
• Whisper Close: The seat and lid close slowly and quietly with a light tap, preventing slamming and pinched fingers.
• Rilascio rapido: The seat and lid are easily removed for cleaning or replacement.
• Super Grip Bumpers: Prevent the seat from shifting on the toilet bowl, providing greater stability.

Figure 5: iLumaLight Night Light in operation.

Manutenzione

• Pulizia: Unplug the bidet seat before cleaning. Use mild soap and water with a soft cloth. Avoid abrasive cleaners or harsh chemicals that could damage the surface. The quick-release feature allows for easy removal of the seat for thorough cleaning of the toilet bowl and seat.
• Deodorizer Cartridge Replacement: The automatic deodorizer uses a replaceable carbon filter. Replace the cartridge periodically as needed to maintain odor neutralization effectiveness. Refer to the deodorizer cartridge packaging for specific replacement intervals.
• Pulizia degli ugelli: The stainless steel nozzle is self-cleaning. If manual cleaning is required, use a soft brush and mild soap.

Figure 6: Quick-release feature for easy cleaning.

Risoluzione dei problemi

If you encounter issues with your BEMIS Renew Plus Bidet Cleansing Spa, please review i seguenti suggerimenti comuni per la risoluzione dei problemi:

• Nessun potere: Ensure the power cord is securely plugged into a functional GFCI outlet. Check if the GFCI outlet has tripped and reset it if necessary.
• Nessuno spruzzo d'acqua: Verify that the water supply valve to the toilet is fully open. Check that the bidet hose connections are secure and not kinked.
• Pressione dell'acqua debole: Ensure the water supply valve is fully open. Check for any blockages in the nozzle or filter (if installed).
• Il telecomando non risponde: Check and replace the AAA batteries in the remote control. Ensure the remote is within range and not obstructed.
• Sedile non riscaldato: Verify the heated seat function is activated on the remote control and the temperature setting is appropriate.
• Deodorante non funzionante: Check if the deodorizing cartridge is correctly installed and replace it if it's old or depleted.

Se i problemi persistono dopo aver provato queste soluzioni, contattare l'assistenza clienti.

Specifiche

Figura 7: Dimensioni del prodotto.

Figure 8: Round Toilet Measurement Guide.

Garanzia e supporto

Garanzia del produttore: The manufacturer warranty covers US and Canada customer purchases. For specific details regarding your warranty coverage, please refer to the documentation included with your product or visit the official Bemis websito.

Assistenza clienti: For technical assistance, troubleshooting, or warranty claims, please contact Bemis customer service. Contact information can typically be found on the product packaging or the official Bemis webposto (RenewSeats.com).