1. Prodotto finitoview
The TSL LTN8608-P8 is a professional-grade 8-channel Network Video Recorder (NVR) designed for advanced surveillance systems. This quad-core NVR supports live view, storage, and playback of IP cameras up to 12.3MP resolution, offering high-definition video recording and management capabilities. It features an 80MB input bandwidth and 8 built-in Power over Ethernet (PoE) ports for direct camera connection, simplifying installation.
The NVR provides versatile video output options including 4K (3840x2160) HDMI, VGA, and CVBS. It supports up to two SATA hard drives, each up to 12TB (hard drives are not included and must be purchased separately for recording). Advanced features include support for 6MP/12.3MP fisheye cameras and compatibility with H.264, H.264 Zip+, and H.265 video compression formats for efficient storage.
2. Caratteristiche principali
- Quad-core 8 Channel Network Video Recorder.
- Supports Live View, Storage, and Playback up to 12.3MP IP Camera resolution.
- 80MB Input Bandwidth for efficient data handling.
- 8 Built-in PoE ports for direct camera power and data.
- 4K (3840x2160) HDMI, VGA, and CVBS Video Output.
- Supports 2 SATA hard drives up to 12TB each (hard drives not included).
- 4 POS (Point of Sale) via TCP/IP support.
- Compatible with 6MP / 12.3MP Fisheye cameras.
- Supports H.264, H.264 Zip+, and H.265 video compression.
3. Contenuto della confezione
Si prega di controllare il contenuto della confezione all'apertura. Se qualche articolo risulta mancante o danneggiato, contattare immediatamente il rivenditore.
- TSL LTN8608-P8 8-Channel 4K NVR Unit
- Adattatore di alimentazione
- Mouse USB
- SATA Cables and Screws for HDD Installation
- Guida rapida / Manuale utente (questo documento)
- Network Cable (may vary by package)
4. Descrizione fisica
4.1 Pannello frontale
Figure 4.1: Front Panel of the LTN8608-P8 NVR
The front panel of the LTN8608-P8 NVR features several indicators and controls for direct interaction with the device. On the left, the "LTS" logo is visible. Towards the center, there are LED indicators for POWER, READY, STATUS, ALARM, and HDD activity, providing quick visual feedback on the NVR's operational status. To the right, a set of numerical and function buttons (1-9, 0) are present, including dedicated buttons for MENU, ESC, SHIFT, PLAY, REC, PTZ, and PREV. A directional pad with an 'Enter' button is located further to the right for navigation. A USB port is also conveniently located on the far right for connecting peripherals like a mouse or USB drive.
4.2 Rear Panel (Typical)
While not pictured, the rear panel typically includes:
- Potenza in ingresso
- Uscita HDMI
- uscita VGA
- Uscita CVBS
- Ethernet Ports (LAN and PoE ports)
- Ingresso/uscita audio
- Ingresso / uscita allarme
- Porte USB aggiuntive
- RS-485 Port (for PTZ control)
5. Guida all'installazione
5.1 Installazione del disco rigido (facoltativa)
The NVR does not include a hard drive. A hard drive is required for recording video. Refer to the detailed instructions in the full manual for proper installation of SATA hard drives. Ensure the NVR is powered off and disconnected from the power source before opening the casing.
5.2 Connessioni iniziali
- Connetti il monitor: Collegare un monitor alla porta di uscita HDMI o VGA dell'NVR.
- Connetti il mouse: Plug the USB mouse into one of the NVR's USB ports (front or rear).
- Collega le telecamere: Connect IP cameras to the NVR's built-in PoE ports using Ethernet cables. For non-PoE cameras or cameras connected to an external PoE switch, connect them to the same network as the NVR.
- Connetti alla rete: Collegare la porta LAN dell'NVR al router o allo switch di rete tramite un cavo Ethernet.
- Connetti alimentazione: Collegare l'adattatore di alimentazione all'ingresso di alimentazione dell'NVR e quindi a una presa di corrente.
5.3 Procedura guidata di configurazione iniziale
Upon first boot, the NVR will typically launch a setup wizard. Follow the on-screen prompts to configure basic settings such as language, date/time, network settings, password, and hard drive initialization.
6. Istruzioni per l'uso
6.1 Vivere View
Dopo la configurazione corretta, l'NVR visualizzerà il live view of connected cameras. Use the mouse or front panel controls to switch between single-channel view, multicanale view, or sequence display.
6.2 Registrazione
Recording can be configured for continuous, motion detection, alarm, or scheduled modes. Access the "Record" menu from the main interface to set up recording schedules and parameters for each channel.
6.3 Riproduzione
per riview registrato footage, enter the "Playback" menu. Select the desired date, time, and channel(s) to begin playback. Options for fast forward, rewind, pause, and frame-by-frame playback are available.
6.4 Accesso remoto
The NVR supports remote access via a web browser or dedicated mobile applications. Ensure the NVR is connected to the internet and port forwarding is configured on your router if necessary. Refer to the network settings section in the full manual for detailed instructions on remote access setup.
7. Manutenzione
- Pulizia regolare: Mantenere l'unità NVR pulita e priva di polvere. Utilizzare un panno morbido e asciutto. Non utilizzare detergenti liquidi.
- Aggiornamenti del firmware: Controllare periodicamente le istruzioni del produttore websito per gli aggiornamenti del firmware per garantire prestazioni e sicurezza ottimali. Seguire attentamente le istruzioni di aggiornamento.
- Stato del disco rigido: Monitor the health of your hard drives through the NVR's system information menu. Replace failing drives promptly to prevent data loss.
- Configurazione di backup: Regularly back up the NVR's configuration settings to a USB drive to facilitate quick restoration if needed.
- Condizioni ambientali: Ensure the NVR is operated within recommended temperature and humidity ranges to prolong its lifespan.
8. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessuna uscita video sul monitor. | Collegamento del cavo allentato, ingresso errato selezionato sul monitor, NVR non acceso. | Check HDMI/VGA cable connections. Ensure monitor is on correct input. Verify NVR power LED is lit. |
| Le telecamere non visualizzano. | Camera not powered, network issue, incorrect IP address, camera not added to NVR. | Check camera power and network cables. Ensure cameras are properly added/discovered by the NVR. Verify IP addresses. |
| Impossibile accedere all'NVR da remoto. | Network configuration issues, incorrect port forwarding, firewall blocking. | Verify NVR network settings. Check router's port forwarding rules. Disable temporary firewalls for testing. |
| Nessuna registrazione. | Nessun disco rigido installato, disco rigido non inizializzato, pianificazione della registrazione non impostata. | Install and initialize a hard drive. Configure recording schedules in the NVR menu. |
For more detailed troubleshooting steps, please refer to the comprehensive troubleshooting section in the full user manual or contact technical support.
9. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | LTN8608-P8 |
| Canali | 8 canali |
| Supporto per la risoluzione massima | Up to 12.3MP IP Camera |
| Larghezza di banda in ingresso | 80 MB |
| Porte PoE | 8 Built-in PoE |
| Uscita video | 4K (3840x2160) HDMI, VGA, CVBS |
| Supporto SATA | 2 SATA interfaces, up to 12TB each (HDD not included) |
| POS Support | 4 POS via TCP/IP |
| Supporto Fisheye | 6MP / 12.3MP Fisheye |
| Compressione video | H.264/H.264 Zip+, H.265 Ready |
| Dimensioni del prodotto | 15"L x 12.4"W x 2"H (15 x 12.4 x 2 pollici) |
| Peso dell'articolo | 8.5 libbre |
| Produttore | LTS |
| Tecnologia di connettività | VGA, HDMI |
10. Garanzia e supporto
This TSL product is covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official TSL website. For technical support, product inquiries, or service requests, please contact your authorized dealer or the manufacturer's customer service department. Keep your purchase receipt as proof of purchase for warranty claims.
Risorse online: For the latest drivers, firmware, and detailed documentation, please visit the official TSL support websito.