Lepro Industrial LED Desk Lamp

Introduzione

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Questo versatile lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

Si prega di leggere attentamente il presente manuale prima dell'installazione e dell'uso e di conservarlo per riferimento futuro.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

Istruzioni di sicurezza

• Leggere attentamente tutte le istruzioni prima di utilizzare lamp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Utilizzare solo lampadine con attacco E27 con una potenza massimatage di 40W.
• Non usare la lamp con un cavo di alimentazione o una spina danneggiati.
• Questo prodotto è destinato esclusivamente all'uso in ambienti interni. Non esporre all'acqua o a umidità elevata.
• Mantieni la lamp lontano da materiali infiammabili.
• Non tentare di smontare o riparare l'lamp da soli. Contattare personale qualificato per l'assistenza.

Contenuto della confezione

Si prega di controllare la confezione per verificare la presenza dei seguenti elementi:

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• Manuale d'uso

Note: The E27 bulb is not included and must be purchased separately.

Configurazione e installazione

Follow these steps to assemble and install your desk lamp:

1. Allega il Clamp: Fissare saldamente il clamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. Montare la Lamp Testa: Installare lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. Inserire il braccio: Inserire con attenzione la lamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. Installa la lampadina: Assicurare lamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp presa. Non serrare eccessivamente.
5. Connettiti all'alimentazione: Collegare lampil cavo di alimentazione in una presa elettrica adatta.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

Immagine: La lamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

Istruzioni per l'uso

Accensione/spegnimento: Locate the rocker switch on the power cord. Press the switch to turn the lamp acceso o spento.

Regolazione dell'angolo di luce: Il lamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

Immagine: La lamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

Manutenzione

Pulizia: Per pulire lamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

Sostituzione della lampadina: Before replacing the bulb, ensure the lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp di nuovo dentro.

Risoluzione dei problemi

• Lamp non si accende:
  • Controllare che il cavo di alimentazione sia collegato saldamente alla presa.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • Controllare la presa di corrente collegando un altro dispositivo.
• La luce tremola:
  • Assicurarsi che la lampadina sia avvitata saldamente.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Controllare che il cavo di alimentazione o la presa non siano allentati.
• Lamp is unstable:
  • Garantire il clamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • Controllare che lamp arm is properly inserted into the clamp giunto.

Specifiche

Image: Product dimensions and key features like E27 bulb base and power cord length.

Garanzia e supporto

Garanzia: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Assistenza clienti: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.