Omni Elite Sealer Instruction Manual

1. Introduzione

The Omni Elite Sealer is an advanced tile and stone sealer designed to protect and enhance a wide range of surfaces. This premium sealer is suitable for unglazed tiles (ceramic, porcelain, quarry) and natural stones (granite, limestone, marble, onyx, quartzite, sandstone, serpentine, slate, soapstone, travertine). It is also effective on concrete and masonry surfaces such as brick, pavers, Saltillo, stucco, and terra cotta. This versatile formula is suitable for both interior and exterior applications, providing a robust shield against moisture, stains, and everyday wear and tear for up to 15 years, depending on conditions.

Figure 1: Omni Elite Sealer product packaging.

2. Impostazione e preparazione

2.1. Preparazione della superficie

Ensure the surface is thoroughly clean, dry, and free of any contaminants, sealers, or coatings before application. New grout installations should cure for at least 48 hours prior to sealing. For existing stains, treat them before applying the sealer.

2.2. Application Tools

Recommended tools for application include a sponge, mop, paint-pad applicator, paint roller, brush, or white cotton/microfiber towel.

2.3. Precauzioni di sicurezza

• AVVERTIMENTO: Può essere nocivo se ingerito.
• MAY IRRITATE EYES AND SKIN. Contains siloxanes.
• Wear skin and eye protection.
• If product gets in eyes, flush with water for at least 15 minutes.
• If product gets on skin, wash with soap and water.
• Se l'irritazione persiste, consultare il medico.
• Se ingerito, NON FARE induce vomiting; seek medical attention.
• TENERE FUORI DALLA PORTATA DEI BAMBINI.

Figure 2: Important safety and application information from the product label.

3. Istruzioni per l'applicazione

3.1. Initial Application

1. Apply Omni Elite Sealer liberally to the surface using a SpongaUSA™ Sealer sponge, or a mop, paint-pad applicator, paint roller, brush, white cotton, or microfiber towel.
2. Allow the Elite Sealer to penetrate for up to 5 minutes.
3. Wipe the surface completely dry using a clean, dry, white cotton or microfiber towel.
4. Some surfaces may require 2 or more coats.
5. Allow at least 30 minutes drying time between coats.
6. Surface is ready for traffic in 12 hours after the final coat.
7. Keep the area dry for at least 24 hours.

3.2. Copertura

Each pint (16 oz) covers approximately 38 to 188 sq. ft. (3.5m² to 17.5m²) per coat. Exact coverage varies based on surface type, porosity, texture, temperature, application method, and the number of coats applied.

3.3. Dimostrazione visiva

4. Manutenzione

For ongoing maintenance, regularly clean sealed surfaces with a pH-neutral cleaner. Avoid harsh chemicals or abrasive cleaners that can degrade the sealer over time. The Omni Elite Sealer is designed for long-lasting performance, offering protection for up to 15 years, depending on environmental conditions and the type of stone. Regular cleaning helps maintain the sealer's effectiveness.

4.1. Checking Sealer Effectiveness

To check if your sealed surface needs reapplication, pour a small amount of water onto the surface. If the water beads up, the sealer is still effective. If the water soaks into the surface and creates a dark spot, it's time to clean the surface and reapply the sealer.

Figure 3: Before and after images demonstrating the stain protection provided by the sealer on a tiled floor.

5. Risoluzione Dei Problemi

5.1. Uneven Application/Residue

If the sealer appears uneven or leaves a residue, it may have been applied too thickly or not wiped off completely within the recommended penetration time. Immediately reapply a small amount of sealer to the affected area, allow it to penetrate for a shorter period (1-2 minutes), and then thoroughly wipe off any excess with a clean, dry cloth.

5.2. Sealer Not Penetrating

If the sealer does not seem to be penetrating the surface, ensure the surface is completely dry and clean. High humidity or residual moisture can hinder penetration. Also, verify that the surface material is porous enough for an impregnating sealer. Some highly dense or polished surfaces may not absorb the sealer effectively.

5.3. Stains After Sealing

While Omni Elite Sealer provides maximum stain protection, no sealer can make a surface entirely stain-proof. If a stain occurs, clean it immediately. For persistent stains, specialized stain removers for stone and tile may be necessary. Always test any cleaning product in an inconspicuous area first.

6. Specifiche

7. Garanzia e supporto

7.1. Garanzia del prodotto

All Omni products carry a 100% Satisfaction Guarantee when used as directed. For complete warranty information, please visit www.omni-sealers.com oppure chiamare il numero 949-709-5270.

7.2. Politica di reso

Questo prodotto può essere rimborsato o sostituito entro 30 giorni dall'acquisto, in base alla politica di reso del venditore.

7.3. Informazioni sul produttore

Produttore: BOE
Distribuito da: Omni Sealers, Inc.
22362 Gilberto Street, Suite 215
Rancho Santa Margarita, CA 92688
Fatto negli USA