OHLPRO SS-X02

OHLPRO Multi Car Retractable Backseat 3-in-1 Charging Station

Model: SS-X02

Introduzione

Thank you for choosing the OHLPRO Multi Car Retractable Backseat 3-in-1 Charging Station. This device is designed to provide convenient and efficient charging for multiple mobile phones and tablets in your vehicle's backseat. Featuring retractable cables and universal compatibility, it ensures a clutter-free and accessible charging solution for passengers.

Cosa c'è nella scatola

  • 1x Multifunctional retractable charging station
  • 1x Manuale d'uso
  • 4x Fixed stickers

Specifiche

CaratteristicaDettaglio
Numero di modelloSS-X02
Dimensioni4.65 x 4.17 x 3.43 pollici
Peso dell'articolo10.6 once
ColoreNero
ConnettivitàUSB (Micro USB, USB-C, USB-i)
Ingresso volumetage12 Volt
Amprabbia3 Amps
Porte USB totali3
Caratteristiche speciali3-in-1 charging, Rotatable, Car headrest mounting, Fast Charging, Multi Device Charging, Retractable Plugs

Istruzioni di installazione

  1. Fissare la staffa di montaggio: Secure the mounting bracket to one of the headrest posts in your car's backseat. The bracket features an adjustable clip to fit various post sizes. Tighten the nut to ensure a stable fit.
  2. Collegare la stazione di ricarica: Insert the ball joint of the charging station into the socket on the mounting bracket. Tighten the ring to secure the charging station in place. The 360-degree rotation feature allows you to adjust the angle for optimal access.
  3. Collegamento elettrico: Route the main power cable from the charging station to a 12V car power outlet (cigarette lighter socket) or a compatible USB port in the front of your vehicle. Use the provided fixed stickers to manage the cable neatly along the seat or console, preventing tangles and maintaining an organized appearance.
Diagram showing installation of OHLPRO charging station on a car headrest and cable routing to the front power source.
Figure 1: Installation and cable routing diagram.
OHLPRO charging station mounted on a car headrest with cables routed to the front seat.
Figure 2: OHLPRO charging station installed in a vehicle.

Istruzioni per l'uso

  1. Accensione: Once connected to a power source, the charging station will be active. The LED indicators above each charging cable will illuminate, signifying readiness.
  2. Extend Cables: Gently pull the desired charging cable (Micro USB, USB-C, or USB-i) from its port. The cables are retractable and will extend up to 21.6 inches (approximately 55 cm). They will lock in place at the desired length.
  3. Connetti dispositivo: Plug the appropriate connector into your mobile phone or tablet. The charging station supports fast charging for up to three devices simultaneously.
  4. Retract Cables: After use, gently pull the cable again slightly, and it will automatically retract back into the charging station, keeping your car interior tidy.
Close-up of OHLPRO charging station showing Micro USB, USB-C, and USB-i retractable cables.
Figure 3: Three retractable charging cables (Micro USB, USB-C, USB-i).
Diagram illustrating the extended length of the retractable cables and the main power cable.
Figure 4: Cable extension and retraction mechanism.

Manutenzione

  • Mantenere pulito il dispositivo strofinandolo con un panno morbido e asciutto.
  • Evitare di esporre il dispositivo a temperature estreme o alla luce solare diretta per periodi prolungati.
  • Ensure cables retract smoothly. Do not force them if they get stuck.

Risoluzione dei problemi

  • Dispositivo non in carica: Ensure the main power cable is securely plugged into both the charging station and the car's power outlet. Check if the car's power outlet is functioning correctly.
  • Cavi che non si ritraggono: Gently pull the cable slightly further out, then release it slowly. Avoid pulling cables at an angle.
  • Ricarica lenta: Verify that your device supports fast charging. Ensure the car's power source provides sufficient amperage. Charging multiple devices simultaneously may slightly reduce individual charging speeds.

Garanzia e supporto

OHLPRO is committed to delivering an exceptional shopping experience. For any questions or concerns, please contact customer support at supporto@ohlpro.com. The product is manufactured by Shenzhen Hengyehui Technology Co., Ltd.

The product comes with a 36-month care plan to address any potential issues.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.