Kendal All in One Foot Spa Bath Massager FBD18 Instruction Manual

Importanti istruzioni di sicurezza

Please read all instructions carefully before using your Kendal Foot Spa Bath Massager. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always ensure the unit is unplugged before filling or emptying water.
• Do not operate the foot spa without water.
• Tenere il cavo di alimentazione lontano da superfici calde.
• Non utilizzare se l'unità o il cavo di alimentazione sono danneggiati.
• Avoid placing feet too close to the water outlet during heating, as the temperature near the outlet can be high.
• Questo apparecchio è destinato esclusivamente all'uso domestico.
• Tenere fuori dalla portata dei bambini.
• Non salire sull'unità.
• If you have any medical conditions, consult a doctor before use.

Prodotto finitoview

Componenti

The Kendal Foot Spa Bath Massager FBD18 is designed for comfort and relaxation. Below are its main components:

Image: Diagram showing the labeled components of the Kendal Foot Spa, including the control panel, air nozzles, heating area, stimulus nodes, rollers, red light, and rubber feet.

Caratteristiche principali

• Funzionalità tutto in uno: Combines heating therapy, O2 bubble massage, and digital controls.
• Controllo digitale della temperatura: Uses a quality PTC heating semiconductor to adjust and maintain water temperature between approximately 95°F (35°C) and 118°F (48°C).
• Funzione timer: Allows setting a massage duration for convenience.
• Rulli massaggianti: Features two active rollers for targeted foot massage, which can be removed.
• Costruzione durevole: Made from high-quality, temperature-resistant plastic with secure multi-insulation protection.
• Caratteristiche di sicurezza: Includes electric leakage protection and UL listing for safety.

Immagine: dall'alto verso il basso view of the Kendal Foot Spa, showing the digital display, control buttons, and bubbling water inside the basin.

Impostare

Unfolding the Foot Spa

1. Place the folded foot spa on a flat, stable surface.
2. Gently press down on the center of the base while pulling up on the sides to expand the basin. Ensure all sides are fully extended and locked into place.

Riempimento con acqua

• Ensure the unit is unplugged before adding water.
• Fill the foot spa with warm water up to the 'MAX' water level line indicated inside the basin. Using warm water initially will help the unit reach your desired temperature faster.
• Do not overfill to prevent splashing during operation.

Image: A hand pressing the power button on the digital control panel of the Kendal Foot Spa, illustrating the ease of interaction.

Istruzioni per l'uso

Accensione/spegnimento

• Collegare il cavo di alimentazione a una presa elettrica standard da 110 V, 60 Hz.
• Premere il tasto ACCESO/SPENTO pulsante sul pannello di controllo per accendere l'unità. Il display digitale si illuminerà.
• Premere il tasto ACCESO/SPENTO nuovamente il pulsante per spegnere l'unità.

Controllo della temperatura

• Dopo l'accensione, premere il tasto TEMP+ or TEMP- buttons to adjust the desired water temperature. The temperature range is approximately 95°F (35°C) to 118°F (48°C).
• The red light will indicate that the heating element is active. Once the water reaches the preset temperature, the red light will automatically turn off.

Funzione timer

• Premere il tasto TIMER button to set the desired duration for your foot spa session. The available time settings typically range from 10 to 60 minutes.

Massage Modes and Bubbles

• The foot spa features O2 bubbles for a relaxing sensation. Press the BOLLA button to activate or deactivate the bubble function.
• The integrated rollers at the bottom provide a manual massage. Gently move your feet back and forth over the rollers to stimulate acupoints and relieve fatigue. These rollers can be removed if you prefer a flat surface.

Image: A person's feet are comfortably soaking in the Kendal Foot Spa, with visible bubbles and the red light indicating active heating.

Manutenzione e pulizia

• Drenante: After each use, unplug the unit. Carefully lift the foot spa using the integrated handle and pour out the water.
• Pulizia: Pulire l'interno e l'esterno dell'unità con un panno morbido eamp stoffa. Non utilizzare detergenti abrasivi o prodotti chimici aggressivi.
• Roller Removal: The massage rollers can be easily removed for cleaning or if you prefer not to use them during your foot spa session.
• Magazzinaggio: Ensure the unit is completely dry before storing. The collapsible design allows for compact storage in small spaces.

Risoluzione dei problemi

• L'unità non si accende: Ensure the power cord is securely plugged into a working electrical outlet. Check if the outlet has power.
• L'acqua non si riscalda: Verify that the unit is powered on and the temperature is set above the current water temperature. Ensure there is sufficient water in the basin.
• Nessuna bolla: Check if the bubble function is activated via the control panel. Ensure the water level is adequate.
• L'unità si spegne inaspettatamente: This may be a safety feature to prevent overheating. Unplug the unit, allow it to cool down, and check for any obstructions or issues before restarting.

Specifiche

Image: A diagram illustrating the dimensions of the Kendal Foot Spa, showing its length, width, and height.

Garanzia e supporto

For warranty information and customer support, please refer to the documentation included with your product or contact Kendal customer service directly. Keep your purchase receipt for warranty claims.