SONICAKE RockStage Multi-Effects Guitar Pedal Instruction Manual

1. Introduzione

Grazie per l'acquistoasing the SONICAKE RockStage Multi-Effects Guitar Pedal. This device is designed to provide essential guitar effects in a compact and user-friendly format, ideal for classic rock musicians. It integrates Distortion, Chorus, Delay, and Reverb effects, along with a built-in cabinet simulator for versatile sound routing.

2. Caratteristiche principali

• One-stop gig solution for classic rock players with all necessary core effects.
• Analog Plexi-style distortion for 80s/90s hard rock tones.
• Analog BBD-style chorus for warm, dreamy soundscapes.
• 500ms analog voice delay and high-quality reverb for expansive, spacy tones.
• Integrated cabinet simulation for direct connection to PA systems, mixers, or audio interfaces.

3. Cosa c'è nella scatola

• SONICAKE RockStage Multi-Effects Guitar Pedal (QCE-10)
• Cavo XLR
• Adattatore di alimentazione (9 V CC)
• Manuale d'uso

4. Istruzioni per l'installazione

4.1 Collegamento di alimentazione

Connect the provided 9V DC power adapter to the 'DC 9V' input jack on the pedal. Ensure the power source meets the pedal's requirements (9V DC, 20mA minimum) to prevent damage.

4.2 Collegamenti audio

1. Ingresso per chitarra: Connect your guitar to the 'IN' jack on the right side of the pedal using a standard 1/4-inch instrument cable.
2. Uscita in Amplificatore/PA: Connect the 'OUT' jack on the left side of the pedal to your guitar amplifier's input or a PA system/mixer using a standard 1/4-inch instrument cable or the provided XLR cable if using the cabinet simulation.
3. Uscita cuffie: For silent practice, connect headphones to the 'PHONES' jack.

5. Istruzioni per l'uso

The RockStage pedal features four main effects: Chorus, Rock Amp (Distortion), Delay, and Reverb. Each effect has dedicated footswitches and control knobs.

5.1 Moduli di effetti

• Coro: Controls for SPEED and DEPTH to adjust the modulation intensity and rate.
• Roccia Amp (Distortion): Controls for VOL (Volume), TONE, and GAIN to shape the distortion character and output level.
• Ritardo: Controls for BLEND (mix), REPEAT (feedback), and TIME to set the delay parameters.
• Riverbero: A single MIX knob to adjust the wet/dry balance of the reverb effect.

5.2 Activating/Deactivating Effects

Each effect module has a dedicated footswitch. Press the footswitch to toggle the corresponding effect on or off. The LED indicator above each footswitch will illuminate when the effect is active.

5.3 Cabinet Simulation

The RockStage pedal includes a built-in cabinet simulator. This feature allows you to connect the pedal directly to a PA system, mixer, or audio interface without needing a traditional guitar amplifier. The 'CABINET SIM' switch (OFF/ON) is located between the Reverb and Delay modules.

5.4 LED Knobs

The control knobs for each effect feature LED backlighting, which clearly indicates the working status of the effect, especially useful in low-light stage ambienti.

5.5 Portabilità

The compact size and lightweight design of the RockStage pedal make it highly portable and road-ready, fitting easily into gig bags or backpacks.

6. Specifiche

7. Manutenzione

• Pulizia: Per pulire il pedale, utilizzare un panno morbido e asciutto. Evitare l'uso di detergenti abrasivi o solventi.
• Magazzinaggio: Conservare il pedale in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• Gestione: Evitare di far cadere il pedale o di sottoporlo a forti urti.
• Energia: Always disconnect the power adapter when the pedal is not in use or during electrical storms.

8. Risoluzione Dei Problemi

• Nessun suono:
  • Assicurarsi che tutti i cavi siano collegati saldamente.
  • Verificare che l'adattatore di alimentazione sia collegato correttamente e fornisca alimentazione.
  • Check your guitar and ampimpostazioni del volume del lifier.
  • Eseguire delle prove con cavi diversi per escludere collegamenti difettosi.
• Rumore/ronzio indesiderato:
  • Assicurarsi di utilizzare l'adattatore di alimentazione corretto.
  • Prova a utilizzare una presa di corrente diversa.
  • Keep the pedal away from other electronic devices that may cause interference.
• Effect Not Activating:
  • Press the footswitch firmly. The LED should illuminate.
  • Check the knob settings for the specific effect; some effects may be subtle at low settings.

9. Garanzia e supporto

The SONICAKE RockStage Multi-Effects Guitar Pedal comes with a Garanzia del prodotto di 1 anni dalla data di acquisto.

For technical support, troubleshooting assistance, or warranty claims, please contact SONICAKE customer service. Refer to the contact information provided on the product packaging or the official SONICAKE websito.