PLUSPOE PoE Injector User Manual

1. Prodotto finitoview

The PLUSPOE PoE Injector is a Power over Ethernet (PoE) adapter designed to supply power and data to PoE-enabled devices over a single Ethernet cable. This allows devices such as IP cameras, IP phones, and wireless access points to be placed up to 328 feet (100 meters) away from a power outlet, simplifying installation and reducing cable clutter. It is compliant with IEEE 802.3af/at standards and supports 10/100Mbps data transfer rates.

Image: The PLUSPOE PoE Injector, a compact black device with two RJ45 ports labeled 'PoE' and 'LAN', and a 'Power Active' LED indicator. It is shown connected to its power cord.

Caratteristiche principali:

• PoE Conversion: Converts a non-PoE Ethernet port into a PoE port.
• Portata estesa: Powers PoE devices up to 328 feet (100 meters) away.
• Potenza in uscita: Provides 48V DC 500mA (24W, max 30W) for IEEE 802.3af/at compliant devices.
• Velocità dei dati: Supports 10/100Mbps Ethernet data transfer.
• Protezioni di sicurezza: Includes Short Circuit, Over Current, and Over Voltage Protezione.
• Collega e usa: Requires no configuration for easy installation.

2. Configurazione e installazione

The PLUSPOE PoE Injector is designed for simple plug-and-play installation. Follow these steps to connect your devices:

Image: A diagram illustrating the simple plug-and-play setup. An IP camera connects to the PoE Injector, which then connects to a router, and the injector itself plugs into a wall outlet.

1. Connetti alimentazione: Plug the included power cord into the PoE Injector and then into a standard AC power outlet (100-240V 50/60HZ). The 'Power Active' LED indicator on the injector will illuminate.
2. Connetti alla rete: Connect an Ethernet cable from your non-PoE network device (e.g., router, network switch) to the 'LAN' port on the PoE Injector.
3. Connessione al dispositivo PoE: Connect another Ethernet cable from the 'PoE' port on the Injector to your PoE-enabled device (e.g., IP camera, IP phone, wireless access point).
4. Verifica connessione: Once connected, your PoE device should receive both power and data.

Image: A detailed wiring diagram showing two solutions. Solution 1: For PoE enabled devices, the injector connects to AC power, then to a non-PoE network switch/router via the 'LAN' port, and finally to an IP camera, IP phone, or access point via the 'PoE' port. Solution 2: For normal devices that do not support PoE, a PoE splitter is used between the injector and the non-PoE device.

Nota: This PoE injector is designed for PoE-enabled devices only. If you need to power a non-PoE device, a separate PoE splitter (not included) will be required to separate power and data at the device end.

Image: An illustration demonstrating the benefit of the PoE injector, showing how it eliminates the need for a separate power adapter for an IP camera and avoids lost Wi-Fi signals by providing a wired connection.

3. Funzionamento

The PLUSPOE PoE Injector operates automatically once connected. The 'Power Active' LED indicator provides visual feedback on the device's status:

• LED verde fisso: Indicates that the PoE Injector is powered on and functioning correctly.
• Nessun LED: Indicates that the device is not receiving power or there is an internal issue.

The injector will automatically detect and provide the necessary power to connected IEEE 802.3af/at compliant devices. No software configuration or driver installation is required.

4. Specifiche tecniche

Image: The compact design of the PoE Injector, showing its external dimensions: 85mm length, 42mm width, and 30mm height.

5. Risoluzione Dei Problemi

If you encounter issues with your PoE Injector, consider the following common troubleshooting steps:

• No Power (LED Off):
  • Ensure the power cord is securely plugged into both the injector and a working electrical outlet.
  • Test the electrical outlet with another device to confirm it has power.
• Dispositivo non alimentato:
  • Verify that your connected device is indeed PoE-enabled and compliant with IEEE 802.3af/at standards. This injector is not designed for non-PoE devices without a splitter.
  • Check the Ethernet cable connecting the injector's 'PoE' port to your device for damage or improper connection. Try a different cable.
  • Ensure the cable length does not exceed 328 feet (100 meters).
• Nessuna connessione dati:
  • Confirm the Ethernet cable from your router/switch is properly connected to the injector's 'LAN' port.
  • Check the Ethernet cable from the injector's 'PoE' port to your device.
  • Ensure your network device (router/switch) is functioning correctly.
• Connessione intermittente:
  • Inspect all Ethernet cables for kinks, cuts, or loose connectors.
  • Assicurarsi che l'ambiente operativo rientri negli intervalli di temperatura e umidità specificati.

6. Manutenzione

The PLUSPOE PoE Injector requires minimal maintenance to ensure optimal performance and longevity:

• Pulizia: Use a soft, dry cloth to wipe the exterior of the device. Do not use liquid cleaners or aerosol sprays.
• Ventilazione: Assicurarsi che il dispositivo sia posizionato in un'area ben ventilata per evitare il surriscaldamento. Non ostruire le aperture di ventilazione.
• Ambiente: Evitare di esporre il dispositivo a temperature estreme, elevata umidità o luce solare diretta.
• Gestione dei cavi: Keep Ethernet cables organized and free from excessive bending or tension to prevent damage.

7. Garanzia e supporto

The PLUSPOE PoE Injector comes with a Garanzia di rimborso di 30 giorni e un Garanzia di 1 anno dalla data di acquisto.

For technical support, warranty claims, or any questions regarding the product, please contact PLUSPOE customer service through the retailer where the product was purchased or refer to the contact information provided with your product packaging.