SVS PC4000PG
Manuale utente del subwoofer cilindrico SVS PC-4000 da 13.5"
Model: PC4000PG
Introduzione
This manual provides essential information for the safe and optimal operation of your SVS PC-4000 13.5" Cylinder Subwoofer. Please read this manual thoroughly before installation and use, and retain it for future reference.
Informazioni sulla sicurezza
Per evitare danni all'unità e garantire la sicurezza personale, osservare le seguenti precauzioni di sicurezza:
- Non esporre il subwoofer all'acqua o a umidità eccessiva.
- Garantire un'adeguata ventilazione intorno all'unità per evitare il surriscaldamento.
- Do not place the subwoofer near heat sources such as radiators or stoves.
- Utilizzare solo il cavo di alimentazione fornito con l'unità.
- Disconnect the power cord from the wall outlet if the unit will be unused for a long period.
- Affidare tutti gli interventi di assistenza a personale qualificato.
Contenuto della confezione
Verificare che tutti gli articoli siano presenti nel pacco:
- SVS PC-4000 13.5" Cylinder Subwoofer
- Cavo di alimentazione
- Telecomando
- Manuale dell'utente (questo documento)
Impostare
Disimballaggio e posizionamento
Carefully remove the subwoofer from its packaging. Due to its size and weight (approximately 92.2 pounds), it is recommended to have assistance during unpacking and placement. Place the subwoofer on a stable, level surface. Consider room acoustics and listening position for optimal performance.
Figura 1: Fronte view of the SVS PC-4000 Cylinder Subwoofer, showcasing its tall, cylindrical design and the control panel at the base.
Connessioni
The PC-4000 subwoofer features various input and output options for integration into your audio system. Ensure all components are powered off before making connections.
- Collegamento elettrico: Connect the supplied power cord to the subwoofer's power inlet and then to a grounded AC outlet.
- Ingresso audio (RCA): Connect the RCA output from your AV receiver or pre-amplifier to the LFE (Low-Frequency Effects) input on the subwoofer. For stereo setups, use both left and right RCA inputs.
- Collegamento di controllo (facoltativo): The subwoofer supports app control via Bluetooth. Ensure Bluetooth is enabled on your smartphone or tablet for initial setup and advanced control.
Figure 2: Rear panel of the SVS PC-4000 Subwoofer, showing the various input and output terminals for audio and power connections.
Istruzioni per l'uso
Accensione/spegnimento
Once connected, turn on the subwoofer using the power switch located on the rear panel. The front display will illuminate. The subwoofer also features an auto-standby mode, which will activate after a period of inactivity.
Display e controlli del pannello frontale
The front panel display provides visual feedback on settings and status. Buttons adjacent to the display allow for basic adjustments.
Figure 3: Close-up of the SVS PC-4000 Subwoofer's front display, showing the model name and control buttons.
SVS App Control
For comprehensive control and advanced features, download the SVS app for iOS or Android devices. The app allows you to:
- Regola i livelli del volume.
- Configure three digital parametric EQs for precise room correction.
- Set crossover frequency.
- Adjust phase and polarity.
- Access custom presets for different listening modes.
Ensure your device's Bluetooth is on and within range of the subwoofer to establish a connection with the SVS app.
Manutenzione
To maintain the performance and appearance of your SVS PC-4000 subwoofer:
- Pulizia: Utilizzare un panno morbido e asciutto per pulire l'esterno. Evitare detergenti abrasivi o solventi.
- Ventilazione: Ensure the vents are clear of dust and obstructions to prevent overheating.
- Posizionamento: Avoid placing the subwoofer in direct sunlight or areas with extreme temperature fluctuations.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessun suono | Power not connected; Input cables loose; Subwoofer in standby mode; Volume too low. | Check power cord and outlet; Secure all audio cables; Press power button or send audio signal to wake from standby; Increase volume via app or remote. |
| Suono distorto | Volume too high; Improper EQ settings; Damaged speaker driver. | Reduce volume; Reset EQ settings in the SVS app; Contact SVS support if distortion persists at moderate volumes. |
| Problemi di connessione Bluetooth | Bluetooth off on device; Subwoofer not in pairing mode; Interference. | Ensure Bluetooth is enabled on your device; Restart the SVS app; Move closer to the subwoofer; Try pairing again. |
Specifiche
- Modello: PC4000PG
- Tipo di altoparlante: Subwoofer
- Diametro subwoofer: 13.5 pollici
- Potenza massima in uscita dell'altoparlante: 1200 Watt
- Tecnologia di connettività: RCA, Bluetooth
- Tipo di controller: Controllo app, remoto
- Dimensioni del prodotto: 16.6"P x 16.6"L x 47"A
- Peso dell'articolo: 92.2 libbre (41.9 chilogrammi)
- Colore: Piano Gloss Black
- Caratteristica speciale: Three digital parametric EQs, Android and iOS app control
- Codice UPC: 856677007459
Garanzia e supporto
The SVS PC-4000 Subwoofer comes with a 5-Year Unconditional Warranty. For warranty claims, technical support, or service inquiries, please contact SVS customer support directly. Retain your proof of purchase for warranty validation.
Assistenza clienti SVS: Visit SVS Websito
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.