CKPSMS Double Toe Walking Foot Instruction Manual

1. Prodotto finitoview

The CKPSMS Double Toe Walking Foot is a specialized presser foot designed for industrial sewing machines. It features both an outside foot (#46970) and an inside foot (#40474-4), working in conjunction to provide even feeding of multiple layers of fabric or challenging materials such as leather, upholstery, canvas, and tent fabrics. This foot helps prevent shifting, puckering, and uneven stitching, ensuring consistent seam quality.

Immagine 1.1: Lato view of the CKPSMS Double Toe Walking Foot, showing its robust construction and dual-foot design.

2. Compatibilità

This walking foot is compatible with a range of industrial sewing machine models. Please verify your machine model against the list below for proper fitment.

• Pfaff Sewing Machine Models: 145, 146, 195, 245, 335, 540, 545, 1240, 1245. (Note: Not compatible with PFAFF 9063)
• Highlead Sewing Machine Models: GS2698-1B
• Zoje Sewing Machine Models: 335/335A
• Wimsew Sewing Machine Models: 0602

3. Componenti inclusi

The package includes a complete set of the double toe walking foot assembly.

• 1 x Outside Foot (Part #46970)
• 1 x Inside Foot (Part #40474-4)
• Alternative Part Number: 91-014522293
• Size: 3/16" = 4MM (measured from the center needle hole to the side)

Image 3.1: The CKPSMS Double Toe Walking Foot components, including the outside and inside feet, as packaged.

4. Configurazione e installazione

Follow these steps to properly install the double toe walking foot on your compatible sewing machine.

1. Power Off Machine: Ensure your sewing machine is turned off and unplugged from the power source for safety.
2. Remove Existing Foot: Loosen the screw that holds the current presser foot in place and carefully remove it.
3. Attach Outside Foot: Position the outside foot (#46970) onto the presser bar. Align the screw hole on the foot with the screw hole on the presser bar.
4. Secure Outside Foot: Insert the screw and tighten it securely, but do not overtighten.
5. Insert Inside Foot: Slide the inside foot (#40474-4) into the designated slot within the outside foot. Ensure it moves freely.
6. Controllare l'allineamento: Manually lower the needle to ensure it passes cleanly through the needle hole of both the inside and outside feet without obstruction. Adjust the foot position slightly if necessary before fully tightening.
7. Funzionalità di prova: With the machine still off, manually turn the handwheel to observe the walking motion of the foot. Both feet should move in sync to feed the fabric.

Immagine 4.1: In alto view of the CKPSMS Double Toe Walking Foot, illustrating the textured surface for enhanced grip on materials.

5. Istruzioni per l'uso

The double toe walking foot is designed to provide superior fabric feeding, especially for thick, slippery, or multi-layered materials. Here are general guidelines for its use:

• Movimentazione dei materiali: Place your fabric layers evenly under the foot. The walking action will help grip and move all layers simultaneously.
• Lunghezza del punto: Experiment with stitch length. For thicker materials, a slightly longer stitch length may be beneficial.
• Selezione dell'ago: Use an appropriate needle size and type for your fabric. A heavy-duty needle is recommended for materials like leather or canvas.
• Tensione del filo: Adjust your machine's thread tension as needed to achieve balanced stitches. The walking foot itself does not directly affect tension, but material thickness can.
• Velocità: For optimal results, especially with challenging materials, sew at a moderate and consistent speed.

6. Manutenzione

Proper maintenance ensures the longevity and optimal performance of your walking foot.

• Pulizia: Periodically remove lint and dust from the foot, especially around the needle hole and feeding teeth, using a small brush or compressed air.
• Ispezione: Regularly inspect the foot for any signs of wear, damage, or deformation. Ensure both the inside and outside feet move smoothly.
• Magazzinaggio: When not in use, store the walking foot in a clean, dry place to prevent rust or damage.

7. Risoluzione Dei Problemi

If you encounter issues while using the walking foot, consider the following common problems and solutions:

8. Specifiche

9. Garanzia e supporto

For information regarding warranty coverage, technical support, or replacement parts, please contact the manufacturer, CKPSMS, directly through their official channels or the retailer from whom the product was purchased. Keep your purchase receipt as proof of purchase.