PWAY PW-HTS0104IR 1x4 HDMI Splitter Extender User Manual

1. Introduzione

The PWAY PW-HTS0104IR is a 1x4 HDMI Splitter Extender designed to distribute a single HDMI high-definition video signal to four separate displays over Cat5e/Cat6 Ethernet cables. This device supports signal transmission up to 60 meters (196 feet) and resolutions up to 1080P at 60Hz. It incorporates Power over Cable (POC) functionality, allowing the receiver units to be powered directly from the main transmitter unit, simplifying installation. Additionally, it features bidirectional infrared (IR) control and EDID learning capabilities, adapting to various complex working environments for stable and uniform signal distribution.

This manual provides detailed instructions for the proper installation, operation, and maintenance of your PW-HTS0104IR HDMI Splitter Extender.

Image 1.1: PWAY PW-HTS0104IR HDMI Splitter Extender components and key features.

2. Contenuto della confezione

Si prega di controllare il contenuto della confezione al momento del disimballaggio. Se qualche articolo risulta mancante o danneggiato, contattare immediatamente il rivenditore.

• 1x HDMI 1x4 Extender (Main Unit)
• 4 ricevitori estensori HDMI
• 1x adattatore di alimentazione (CC 12 V)
• 5x IR IN Cables
• 5x IR OUT Cables
• 1x Scheda di garanzia
• 1x Manuale utente

Image 2.1: Contents of the PWAY PW-HTS0104IR package.

3. Prodotto finitoview

3.1 Transmitter Unit (Main Unit)

The main transmitter unit features one HDMI input, four Cat6 outputs for connecting to receiver units, a DC 12V power input, and IR IN/OUT ports for remote control functionality. It also includes LED indicators for power (PWR), status (STATUS), and EDID settings.

3.2 Receiver Units

Each receiver unit connects to a display and receives power via the Cat6 cable (POC). It has one Cat6 input, one HDMI output, and IR IN/OUT ports. LED indicators show power (PWR) and signal status (STA).

Immagine 3.1: Anteriore e posteriore views of the PWAY HDMI Splitter Extender units.

4. Istruzioni per l'installazione

Follow these steps to set up your HDMI Splitter Extender system:

1. Collegare la sorgente HDMI: Connect your HDMI source device (e.g., PC, DVD player, TV Box) to the HDMI IN port of the main transmitter unit using a high-quality HDMI cable.
2. Connect Cat5e/Cat6 Cables: Connect up to four Cat5e/Cat6 Ethernet cables from the Cat6 OUT ports of the main transmitter unit to the Cat6 IN ports of each receiver unit. Ensure direct connections; intermediate network switches are not supported for signal transmission.
3. Collegare i display HDMI: Connect each receiver unit's HDMI OUT port to your display devices (e.g., TV, monitor) using HDMI cables.
4. Collegare i cavi IR (facoltativo): If using IR control, connect the IR IN cable to the IR IN port on the receiver unit and position the IR receiver eye near your display. Connect the IR OUT cable to the IR OUT port on the main transmitter unit and position the IR emitter eye near your HDMI source device. For controlling the display from the source location, connect the IR IN cable to the main unit and IR OUT to the receiver.
5. Accensione: Connect the provided 12V DC power adapter to the main transmitter unit. The receiver units will be powered via POC (Power over Cable) through the Cat5e/Cat6 cables.
6. Verifica connessione: Power on all connected devices. The PWR and STATUS/STA LEDs on both the transmitter and receiver units should illuminate, indicating a successful connection.

Image 4.1: Typical connection diagram for the PWAY HDMI Splitter Extender.

5. Istruzioni per l'uso

5.1 Funzionamento di base

Once all connections are made and power is supplied, the system operates automatically. The HDMI signal from your source will be split and extended to all connected displays. No software or drivers are required for basic functionality.

5.2 EDID Function

The EDID (Extended Display Identification Data) function allows the transmitter to learn the optimal resolution and display settings from the connected display. This ensures compatibility and the best possible video output. The EDID switch on the main unit can be used to cycle through different EDID modes or to copy the EDID from a specific display. Refer to the specific EDID switch settings on your device for detailed operation.

5.3 Controllo IR

The bidirectional IR control feature allows you to control your HDMI source device from the remote display location, or control the display from the source location. Ensure the IR IN and IR OUT cables are correctly connected and positioned for optimal signal reception and transmission.

Image 5.1: Illustration of POC and IR remote control functionality.

5.4 POC Function

Power over Cable (POC) simplifies installation by allowing the receiver units to draw power directly from the main transmitter unit through the Cat5e/Cat6 Ethernet cable. This eliminates the need for separate power adapters at each receiver location.

6. Risoluzione Dei Problemi

If you encounter issues with your PWAY HDMI Splitter Extender, refer to the following troubleshooting steps:

• Nessun segnale sul display:
  • Assicurarsi che tutti i cavi HDMI e Cat5e/Cat6 siano collegati saldamente.
  • Verify that the main transmitter unit is powered on and its PWR LED is lit.
  • Check that the Cat5e/Cat6 cables are directly connected between the transmitter and receivers, without any intermediate network switches.
  • Try a different HDMI cable between the source and transmitter, and between the receiver and display.
  • Adjust the EDID settings on the main unit to ensure compatibility with your display.
  • Test with a shorter Cat5e/Cat6 cable if possible, to rule out cable length issues.
  • Ensure your display is set to the correct HDMI input.
• Controllo IR non funzionante:
  • Ensure IR IN and IR OUT cables are correctly connected to their respective ports on both the transmitter and receiver units.
  • Verify that the IR emitter eye is positioned directly in front of the IR sensor of your source device.
  • Ensure the IR receiver eye is positioned to receive signals from your remote control.
  • Check for any obstructions between the remote and the IR receiver eye.
• Intermittent Signal/Picture Flickering:
  • Check the quality and integrity of your Cat5e/Cat6 cables. Damaged or low-quality cables can cause signal degradation.
  • Ensure the cable length does not exceed the maximum recommended distance (60m/196ft).
  • Verify that the power adapter is providing stable power to the main unit.
• Compatibility Issues (e.g., with ATEM Switcher):
  • Some specialized video equipment, like certain ATEM switchers, may have specific signal requirements that might not be fully compatible with all HDMI extenders. Ensure the output signal from your source is standard HDMI 1080P@60Hz.
  • Try connecting the source directly to the display to confirm the source output is functional.

7. Specifiche

8. Manutenzione

To ensure the longevity and optimal performance of your PWAY HDMI Splitter Extender, follow these maintenance guidelines:

• Pulizia: Use a soft, dry cloth to clean the exterior of the units. Avoid using liquid cleaners or solvents, as they may damage the finish or internal components.
• Magazzinaggio: Quando non in uso, conservare il dispositivo in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• Gestione: Handle the units and cables with care. Avoid dropping the devices or subjecting them to strong impacts.
• Ventilazione: Assicurare un'adeguata ventilazione attorno alle unità per evitare il surriscaldamento. Non ostruire le aperture di ventilazione.

9. Garanzia e supporto

PWAY products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period and coverage details.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the PWAY customer service department. Contact information can typically be found on the warranty card or the official PWAY websito.

When contacting support, please have your product model number (PW-HTS0104) and purchase information readily available.