Woods 50012WD 2-Outlet Outdoor 24-Hour Heavy Duty Mechanical Timer User Manual

1. Introduzione

This manual provides instructions for the safe and efficient use of your Woods 50012WD 2-Outlet Outdoor 24-Hour Heavy Duty Mechanical Timer. This device is designed to automate the on/off cycles of outdoor electrical devices, such as seasonal lighting or pond pumps, for convenience and energy saving.

The timer features two grounded outlets and a durable, weather-resistant housing suitable for outdoor use. Please read this manual thoroughly before installation and operation.

2. Informazioni importanti sulla sicurezza

AVVERTIMENTO: Per ridurre il rischio di incendi, scosse elettriche o lesioni personali, seguire sempre queste precauzioni di sicurezza di base:

• Do not immerse the timer in water or expose it to direct water spray. It is weather-resistant, not waterproof.
• Ensure the timer is plugged into a Ground Fault Circuit Interrupter (GFCI) protected outlet when used outdoors.
• Do not exceed the electrical ratings of the timer: 125V, 15A, 1875W, 60Hz.
• Always unplug the timer from the power source before cleaning or performing any maintenance.
• Do not use with extension cords that are not rated for outdoor use.
• Tenere i bambini lontani dal timer e dai dispositivi collegati.
• Do not disassemble the timer. There are no user-serviceable parts inside.
• Ensure all connections are secure and dry before applying power.

3. Contenuto della confezione

• Woods 50012WD Outdoor Mechanical Timer
• Manuale di istruzioni (questo documento)

4. Prodotto finitoview

The Woods 50012WD timer features a rotating dial with segments for setting ON/OFF times, a manual override switch, and two grounded outlets.

Immagine 1: anteriore view of the Woods 50012WD Outdoor Mechanical Timer. The timer is black with a green central dial and a short power cord extending from the bottom. Two grounded outlets are visible on the side.

5. Configurazione e installazione

1. Scegli una posizione: Select a suitable outdoor location that is protected from direct heavy rain and snow, preferably under an overhang or in a sheltered area. Ensure the timer is placed on a stable surface or mounted securely.
2. Collega il timer: Insert the timer's power cord into a 125V, 60Hz GFCI-protected outdoor electrical outlet.
3. Connetti dispositivi: Plug the devices you wish to control into the two grounded outlets on the timer. Ensure the total wattage dei dispositivi collegati non supera i 1875W.

6. Istruzioni per l'uso

The Woods 50012WD is a 24-hour mechanical timer. Its operation relies on setting the current time and then pushing down segments on the dial to define ON periods.

6.1 Impostazione dell'ora corrente

1. Locate the rotating dial on the front of the timer. The dial is marked with 24 hours (1-24 or AM/PM indicators).
2. Rotate the entire dial clockwise until the current time aligns with the "TIME NOW" arrow or indicator on the timer's housing. For example, if it's 6 PM, align the "18" (or "6 PM") mark with the indicator.

6.2 Setting ON/OFF Times

The dial is surrounded by small segments. Each segment typically represents a 15 or 30-minute interval. Pushing a segment giù activates the connected device during that time interval. Pulling a segment up deactivates the device.

1. Identify the time periods when you want your connected devices to be ON.
2. For each desired ON period, push the corresponding segments on the dial giù.
3. For all other times, ensure the segments are pulled up.
4. The timer will now cycle ON and OFF according to your settings every 24 hours.

6.3 Interruttore di override manuale

The timer includes a manual override switch, usually located near the dial. This switch allows you to bypass the programmed settings.

• Timer acceso: The timer will operate according to the programmed ON/OFF segments.
• Sempre acceso: The connected devices will remain ON, overriding any programmed OFF times.
• Sempre OFF: The connected devices will remain OFF, overriding any programmed ON times.

Refer to the specific markings on your timer for the exact positions of the manual override switch.

7. Manutenzione

• Pulizia: Scollegare il timer dalla presa di corrente prima di pulirlo. Pulire l'esterno con un panno morbido e asciutto.amp panno. Non usare detergenti abrasivi o solventi.
• Magazzinaggio: Se si conserva il timer per un periodo prolungato, assicurarsi che sia pulito e asciutto. Conservare in un luogo fresco e asciutto, al riparo dalla luce solare diretta.
• Ispezione: Periodically inspect the timer and its cord for any signs of damage, such as cracks, fraying, or discoloration. If damage is found, discontinue use and replace the unit.

8. Risoluzione Dei Problemi

9. Specifiche

• Modello: 50012WD
• Tipo: Heavy Duty Outdoor Mechanical Timer
• Punti vendita: 2 prese di terra
• Voltage Valutazione: 125 Volt
• Ampvalutazione età: 15 A
• Frequenza Valutazione: Frequenza 60 Hz
• Potenza nominale: 1875 L
• Tipo di timer: Meccanico 24 ore su XNUMX
• Marca: Woods (Southwire/Coleman Cable)
• Codice UPC: 078693500121

10. Garanzia e supporto

Woods products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official Woods (Southwire/Coleman Cable) websito o contattare il loro servizio clienti.

Conservare la prova d'acquisto per eventuali richieste di garanzia.

Informazioni sui contatti: Per le informazioni di supporto più aggiornate, visitare il sito Woods Store su Amazon or the official manufacturer's websito.