Introduzione
The Westek 6603BC Screw-in Touch Dimmer Switch is designed to convert any metal lamp into a 3-way touch-dimming lamp. This device screws into a standard light bulb socket, allowing you to control the brightness of your lamp by simply touching any metal part of the lamp. It supports a maximum of 150 watts and is intended for use with incandescent bulbs only.
Informazioni sulla sicurezza
- SOLO PER USO INTERNO. Non esporre a umidità o temperature estreme.
- WAT . MASSIMOTAGE: 150W. Non superare il wat specificatotage per prevenire il surriscaldamento e potenziali danni.
- USE WITH INCANDESCENT BULBS ONLY. This dimmer is not compatible with LED, CFL, or other non-incandescent bulb types. Using incompatible bulbs may cause damage to the dimmer or the bulb, and may pose a fire hazard.
- Assicurare lamp is unplugged from the power outlet before installation or removal.
- Do not attempt to disassemble or modify the dimmer switch.
- Tenere fuori dalla portata dei bambini.
Contenuto della confezione
- Westek 6603BC Screw-in Touch Dimmer Switch (Quantity: 6, as per product listing)
Configurazione e installazione
- Stacca la Lamp: Assicurare lamp you intend to modify is unplugged from the wall outlet before beginning installation.
- Rimuovere la lampadina esistente: Carefully unscrew the existing light bulb from the lamp PRESA.
- Installare l'interruttore dimmer: Screw the Westek 6603BC Touch Dimmer Switch into the lamp's light bulb socket. Ensure it is screwed in firmly but do not overtighten.
- Installare la lampadina: Screw an incandescent light bulb (up to 150W) into the socket of the Westek 6603BC Touch Dimmer Switch.
- Collega la Lamp: Once the dimmer and bulb are securely installed, plug the lamp back into a wall outlet.
Image: The Westek 6603BC Screw-in Touch Dimmer Switch. This white cylindrical device screws into a lamp socket, with a socket on top for an incandescent bulb. It features a metal screw base at the bottom and is labeled "DGKD" on its body.
Istruzioni per l'uso
After installation, the Westek 6603BC Touch Dimmer Switch allows you to control your lamp's brightness by touching any metal part of the lamp base or stem.
- Primo tocco: Toccare qualsiasi parte metallica dell'lamp. The light will turn on to its lowest brightness setting.
- Secondo tocco: Tocca la lamp again. The light will increase to a medium brightness setting.
- Terzo tocco: Tocca la lamp a third time. The light will increase to its highest brightness setting.
- Quarto tocco: Tocca la lamp a fourth time. The light will turn off.
The dimmer cycles through Low, Medium, High, and Off with each subsequent touch.
Manutenzione
- To clean the dimmer switch, ensure the lamp is unplugged. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Regularly check the connections to ensure the dimmer and bulb are securely screwed in.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Dimmer does not respond to touch. | Lamp è scollegato. La lampadina è allentata o bruciata. Dimmer is not fully screwed in. Lamp is not metal. | Assicurare lamp è collegato Controllare/sostituire la lampadina. Tighten dimmer in socket. Conferma lamp has metal components for touch functionality. |
| Light does not dim, only turns on/off. | Using an incompatible bulb (e.g., LED, CFL). Dimmer malfunction. | Replace with an incandescent bulb (up to 150W). Contact customer support if issue persists with incandescent bulb. |
| La luce tremola o ronza. | Collegamento allentato. Lampadinatage troppo basso o troppo alto. Lampadina incompatibile. | Controllare tutti i collegamenti. Ensure bulb is 150W or less and incandescent. Replace with a compatible incandescent bulb. |
Specifiche
- Modello: 6603 a.C.
- Marca: Ovest
- Modalità operativa: Manuale, controllo touch
- Tipo di interruttore: Dimmer Switch, Touch Switch
- Tipo di circuito: 3-way dimming
- Cosatage: 150 watt (massimo)
- Compatibilità: Incandescent bulbs ONLY
- Materiale: Metallo
- Dimensioni articolo (L x P x A): Approximately 11 x 4.3 x 8.3 inches (Note: This dimension appears to be for the package of 6 units, not a single dimmer. The dimmer itself is compact.)
- Protocollo di connettività: X-10
Garanzia e supporto
For warranty information or technical support regarding your Westek 6603BC Screw-in Touch Dimmer Switch, please refer to the manufacturer's official website or contact Westek customer service directly. Keep your purchase receipt for warranty claims.
Produttore: AMERTAC-WESTEK