Introduzione
Grazie per l'acquistoasing the ORICO 6629US3 USB3.0 Dual Bay HDD/SSD Docking Station. This device is designed to provide convenient data transfer and offline cloning capabilities for 2.5-inch and 3.5-inch SATA hard drives and solid-state drives. Please read this manual carefully to ensure proper installation and operation.
Caratteristiche del prodotto
- Trasferimento ad alta velocità: Features a high-speed USB 3.0 port, achieving a maximum transfer speed of 5Gbps. UASP support further enhances transfer speeds. Backward compatible with USB 2.0 / 1.0.
- Funzione clone: Supports two 2.5-inch or 3.5-inch SATA hard drives, with a total capacity of up to 20TB (10TB per slot). Includes an offline HDD/SSD cloning function, allowing direct drive duplication without a computer.
- Facile da usare: Driver-free and supports hot-swap. Progress indicator lights clearly show the device's operational status during cloning.
- Ampia compatibilità: Vertical insertion design, tool-free installation, and excellent heat dissipation. Supports Mac, Windows, and Linux operating systems.
Contenuto della confezione
- 1x ORICO USB3.0 HDD Docking Station
- 1x 12V3A Power Adapter (PSE certified)
- 1x USB3.0 Cable (100cm)
- 1x Manuale utente
- 1x carta dei servizi
Specifiche
| Nome del prodotto | ORICO HDD Docking Station with Clone Function |
| Numero di modello | 6629US3 |
| Unità supportate | 2.5/3.5-inch SATA HDD/SSD |
| Capacità massima | Up to 10TB per slot, 20TB total |
| Funzioni | Offline clone, Data transfer |
| Interfaccia di ingresso | USB 3.0 tipo B |
| Materiale | Plastica ABS |
| Colore | Nero |
| Adattatore di alimentazione | 12V3A (PSE certified) |
| Lunghezza del cavo | USB 3.0 A-B (100cm) |
| Peso dell'articolo | 260 grammi |
| Sistema operativo compatibile | Mac, Windows, Linux |
Impostare
- Disimballare il dispositivo: Rimuovere con attenzione tutti i componenti dalla confezione.
- Connetti alimentazione: Connect the provided 12V3A power adapter to the docking station's power input port and then to a power outlet.
- Inserire le unità:
Image: The ORICO 6629US3 docking station with a 3.5-inch HDD and a 2.5-inch SSD inserted into its two vertical slots.
Insert your 2.5-inch or 3.5-inch SATA HDD/SSD vertically into the designated slots (HDD1 and HDD2). Ensure the drives are firmly seated. The device supports tool-free installation. - Connect to PC (for data transfer):
Image: The ORICO 6629US3 docking station connected to a laptop via a USB 3.0 cable, demonstrating its use for data access.
If you intend to use the docking station for data transfer to/from a computer, connect the USB 3.0 cable from the docking station to an available USB 3.0 port on your computer. - Accensione: Press the power button on the docking station. The power LED should illuminate blue.
Istruzioni per l'uso
A. Data Transfer Mode (PC Connection)
- Ensure the 'PC/CLONE' switch on the back of the device is set to 'PC'.
- Connect the docking station to your computer using the USB 3.0 cable.
- Insert your 2.5-inch or 3.5-inch SATA HDD/SSD into the slots.
- Power on the docking station. Your computer should detect the drives automatically (driver-free).
- You can now access the drives as external storage devices on your computer.
B. Funzione di clonazione offline
The offline clone function allows you to duplicate a hard drive without connecting to a computer. This is useful for creating backups or upgrading drives.
Important Notes for Cloning:
- Disco sorgente: The original HDD/SSD to be copied. Insert into the 'Source' slot.
- Disco di destinazione: The destination HDD/SSD for the copy. Insert into the 'Target' slot.
- The target disk's capacity must be uguale o maggiore di the source disk's capacity. Cloning will not start otherwise.
- Cloning will overwrite all data on the target disk. Please back up any important data from the target disk before proceeding.
- Incorrect insertion of Source and Target disks can lead to data loss on your original drive. Always confirm disk positions before starting.
- The time required for cloning depends on the total capacity of the source hard disk, not the size of the data stored on it.
- Disconnetti dal PC: Ensure the docking station is disconnected from your computer.
- Inserire le unità: Insert the source disk into the 'Source' slot (HDD1) and the target disk into the 'Target' slot (HDD2). Ensure they are firmly seated.
Image: The ORICO 6629US3 docking station showing the 'Source' and 'Target' slots for offline cloning, with drives inserted.
- Connetti alimentazione: Connect the power adapter and press the power button. The device will beep twice and begin a self-test.
- Imposta modalità clonazione: Push the 'PC/CLONE' switch on the back of the product to the 'CLONE' position.
- Avvia la clonazione: Press the 'Start' button on the product. Cloning will begin.
- Monitorare i progressi: The LED indicators (25%, 50%, 75%, 100%) will show the cloning progress. All LEDs will illuminate when cloning is complete.
Image: A close-up of the ORICO 6629US3 docking station highlighting the LED progress indicators (25%, 50%, 75%, 100%) during an offline cloning operation.
- Completamento: Once all LEDs are lit, the cloning process is finished. You can now safely remove the drives.
Manutenzione
- Pulizia: Utilizzare un panno morbido e asciutto per pulire l'esterno della docking station. Non utilizzare detergenti liquidi o spray.
- Magazzinaggio: Conservare il dispositivo in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
- Dissipazione del calore: The vertical design aids in heat dissipation. Ensure the device is placed in a well-ventilated area to prevent overheating, especially during prolonged use or cloning operations.
Image: The ORICO 6629US3 docking station illustrating its vertical design and airflow for efficient heat dissipation.
- Alimentazione elettrica: Always use the original 12V3A power adapter provided with the device to ensure stable operation.
Image: The ORICO 6629US3 docking station with its 12V power adapter connected, emphasizing stable power delivery.
Risoluzione dei problemi
- Unità non rilevata dal PC:
- Ensure the USB cable is securely connected to both the docking station and the computer.
- Verify the 'PC/CLONE' switch is set to 'PC' mode.
- Check if the drive is properly seated in the slot. If only one HDD LED lights up, the unlit HDD has a connection issue. Reinsert the drive.
- Prova a connetterti a un'altra porta USB del tuo computer.
- For new drives, they may need to be initialized and formatted in Disk Management (Windows) or Disk Utility (Mac) before they appear.
- Offline Clone Fails to Start:
- Assicurarsi che la docking station sia scollegata da qualsiasi computer.
- Verify the 'PC/CLONE' switch is set to 'CLONE' mode.
- Confirm that the target disk's capacity is equal to or greater than the source disk's capacity.
- Check that the source and target drives are inserted into the correct slots ('Source' and 'Target').
- Ensure both drives are properly seated.
- Velocità di trasferimento lente:
- Assicurati di utilizzare una porta USB 3.0 sul tuo computer e il cavo USB 3.0 fornito.
- Per prestazioni ottimali, verifica che il tuo sistema operativo supporti UASP.
- Surriscaldamento del dispositivo:
- Assicurare un'adeguata ventilazione attorno alla docking station.
- Avoid placing the device in enclosed spaces.
Garanzia e supporto
ORICO provides an Garanzia di 18 mesi for this product from the date of purchase. Additionally, ORICO offers supporto tecnico a vita per i suoi prodotti.
If you encounter any issues or have questions regarding the product, please contact ORICO customer support through your retailer or the official ORICO website. Please have your purchase receipt and product model number (6629US3) ready when contacting support.