PWR+ PWR-TAD09020-A01

PWR+ EP73954 Power Supply for Delta Faucet Gen 3 Solenoid - Instruction Manual

Model: PWR-TAD09020-A01

1. Finitaview

The PWR+ EP73954 Power Supply is an AC adapter designed to provide consistent power to compatible Delta Touch2O faucets, replacing the need for battery power. This adapter ensures reliable operation of your faucet's electronic features.

PWR+ EP73954 Power Supply unit with cord

Image 1.1: The PWR+ EP73954 Power Supply unit, showing the adapter block and the attached power cord with a barrel connector.

2. Informazioni importanti sulla sicurezza

Si prega di leggere attentamente tutte le istruzioni di sicurezza prima di installare o utilizzare questo prodotto. Il mancato rispetto di queste istruzioni può causare scosse elettriche, incendi o altri pericoli.

  • Spina con messa a terra: The power supply features a grounded plug to ensure safe and reliable operation.
  • Certificazioni di sicurezza: This charger is CE/FCC/RoHS certified, indicating compliance with safety standards.
  • Caratteristiche di protezione: Built-in smart features safeguard against incorrect voltage (IV), short circuit (SC), and internal overheating (IO).
Important safety warnings: Leave batteries installed, do not install in switched outlet, do not use three-prong to two-prong converters.

Image 2.1: Important safety guidelines for the power supply. It advises to leave batteries installed, avoid switched outlets (like garbage disposal outlets), and not to use three-prong to two-prong converters.

  • Batteria di backup: It is recommended to keep the faucet's battery pack plugged in while the AC adapter is in use. This serves as a backup in case of power interruption.
  • Tipo di presa: Do not install the AC adapter in a switched outlet, such as one intended for a garbage disposal. This can lead to intermittent power and improper faucet operation.
  • Utilizzo dell'adattatore: Do not use three-prong to two-prong converters with this power supply.

3. Configurazione e installazione

This power supply is designed to replace the battery pack for your Delta Touch2O faucet, providing continuous AC power. Follow these steps for proper installation:

  1. Locate Faucet Solenoid: Identify the solenoid unit of your Delta Touch2O faucet, typically located under the sink.
  2. Disconnect Battery Pack (Optional): While the battery pack does not have to be installed when using the AC adapter, it is recommended to keep it plugged in as a backup. If you choose to remove it, ensure the faucet is off and carefully disconnect the battery pack.
  3. Collegare l'alimentazione: Plug the barrel connector of the PWR+ AC adapter into the designated power input port on your Delta faucet's solenoid unit.
  4. Collegare alla presa: Connect the AC adapter's grounded plug into a standard, unswitched 100V-240V AC wall outlet. Ensure the outlet is not controlled by a switch (e.g., a garbage disposal switch). The extra-long 6.7 ft cord provides flexibility for placement.
  5. Verifica operazione: Test your Delta Touch2O faucet to ensure it functions correctly with the new power supply.
PWR+ EP73954 Power Supply with its long cord coiled and secured with a hook-and-loop strap.

Image 3.1: The PWR+ power supply, highlighting its extra-long 6.7 ft cord, which aids in reaching suitable power outlets.

4. Funzionamento

Once properly installed, the PWR+ EP73954 Power Supply provides continuous 9V 2A power to your Delta Touch2O faucet. The faucet will operate as designed, utilizing its touch-on/off functionality and other electronic features without relying on disposable batteries.

  • Potenza costante: The adapter delivers a stable power supply, ensuring consistent performance of your faucet's electronic components.
  • Batteria di backup: If the battery pack is kept connected, it will act as a seamless backup in the event of a power outage, preventing interruption of faucet functionality.

5. Compatibilità

This power supply is compatible with various Delta Touch2O kitchen faucet models. It is designed to upgrade your faucet by replacing the battery pack with consistent A/C power.

Compatible Delta Touch2O Faucet Models:

  • 9997T-AR-DST
  • 9959T-AR-DST
  • 9913T-AR-DST
  • 980T-SSSD-DST
  • 9659T-AR-DST
  • 9197T-RB-DST
  • 9192T-SD-DST
  • 9192T-AR-DST
  • 9181T-AR-DST
  • 9178T-AR-DST
  • 9159T-AR-DST
  • 9113T-AR-DST
  • 561T-DST
  • 4353T-AR-DST
  • 19940T-SPSD-DST
  • 19922T-SSSD-DST
  • 1980T-DST
  • 15960T-SS-DST
  • 19802TZ-SP-DST
  • 15938T-DST

If your Delta Touch2O faucet model is not listed, please consult your faucet's manual or contact PWR+ customer support for compatibility verification.

6. Specifiche

MarcaPotenza+
Numero di modelloPWR-TAD09020-A01
Ingresso volumetageCA 100 V - 240 V
Volume di uscitatage9 Volt
Corrente di uscita2 Amps
Cosatage18 Watt
Lunghezza del cavo6.7 piedi (extra lungo)
Tipo di connettoreConnettore a cilindro
Potenza Tipo spinaTipo A - 2 pin (Nord America)
ColoreNero
MaterialePlastica
Caratteristiche specialiProtezione da cortocircuito, Vol erratotage Protezione, Protezione interna contro il surriscaldamento
CertificazioniCertificazione CE/FCC/RoHS
Peso dell'articolo0.22 chilogrammi

7. Manutenzione

The PWR+ EP73954 Power Supply requires minimal maintenance to ensure long-term performance.

  • Pulizia: Keep the adapter clean and free from dust. Wipe with a dry, soft cloth as needed. Do not use liquid cleaners.
  • Verifica della connessione: Periodically inspect the connections to the faucet solenoid and the wall outlet to ensure they are secure.
  • Cura del cavo: Evitare di piegare o attorcigliare eccessivamente il cavo di alimentazione. Non appoggiare oggetti pesanti sul cavo.
  • Condizioni ambientali: Ensure the adapter is used in a dry environment, away from excessive heat or moisture.

8. Risoluzione Dei Problemi

If you encounter issues with your PWR+ EP73954 Power Supply, refer to the following common troubleshooting steps:

ProblemaPossibile causaSoluzione
Faucet not responding or intermittent operation.Power supply plugged into a switched outlet (e.g., garbage disposal).Relocate the power supply to a continuous, unswitched wall outlet.
No power to the faucet.Connessione allentata o uscita di alimentazionetage.Check that the power supply is securely plugged into both the faucet solenoid and the wall outlet. Verify power to the outlet. If a battery pack is installed, check if it provides power.
Faucet still requires battery changes frequently.Power supply not correctly installed or faulty.Ensure the power supply is fully connected and functioning. If the issue persists, contact customer support.
Flickering faucet light (if applicable).Interference or power inconsistency.Some users report removing the batteries resolves this. Ensure the power supply is in an unswitched outlet.

If these steps do not resolve the issue, please contact PWR+ customer support for further assistance.

9. Garanzia e supporto

PWR+ stands behind the quality of its products.

  • Garanzia: Questo prodotto viene fornito con un Rimborso entro 30 giorni E 24 Months Exchange Warranty.
  • Assistenza clienti: PWR+ è un'azienda con sede a Washington, USA, dotata di esperti del servizio clienti dedicati, pronti ad assisterti.
  • Contatto: For warranty claims, technical assistance, or any product-related inquiries, please refer to the contact information provided on the official PWR+ websito o la documentazione di acquisto.
US Seller 2 Years Warranty badge with American flag design.

Image 9.1: The PWR+ 2-Year Warranty badge, indicating product reliability and support.

© 2024 PWR+. Tutti i diritti riservati.

Documenti correlati - PWR-TAD09020-A01

Preview Ancoraggio a cuneo domestico DEWALT: specifiche tecniche, guida all'installazione e dati sulle prestazioni
Guida tecnica dettagliata per gli ancoraggi a cuneo DEWALT per uso domestico. Include descrizione del prodotto, applicazioni, caratteristiche, specifiche dei materiali, istruzioni di installazione, dati sulle prestazioni (capacità di carico massima e ammissibile) e informazioni per l'ordine per i modelli in acciaio al carbonio, acciaio inossidabile 303 e acciaio inossidabile 316.
Preview Guida tecnica per ancoranti a vite con bullone a cuneo in acciaio inossidabile DEWALT 316
Guida tecnica completa per l'ancoraggio a vite Wedge-Bolt in acciaio inossidabile 316 di DEWALT, che descrive in dettaglio le caratteristiche del prodotto, le applicazioni, l'installazione, i dati sulle prestazioni in calcestruzzo e muratura e le informazioni per l'ordine.
Preview Guida tecnica per ancoranti a manicotto per impieghi gravosi DEWALT Power-Bolt
Guida tecnica completa per gli ancoraggi a manicotto per impieghi gravosi DEWALT Power-Bolt, che descrive in dettaglio le specifiche del prodotto, le applicazioni, l'installazione, i dati sulle prestazioni e i criteri di progettazione per applicazioni su calcestruzzo, muratura e ponti in acciaio.
Preview Catalogo Knog 2021 di illuminazione e accessori per esterni
Scopri il catalogo completo 2021 di Knog con soluzioni di illuminazione per esterni innovative e durevoli, tra cui fariamps, luci per bici e il versatile sistema modulare PWR, progettato per l'avventura e la sostenibilità.
Preview Perni di guida con testa DEWALT da 0.300": guida tecnica e specifiche
Scopri i perni di guida con testa piatta da 0.300" di DEWALT, elementi di fissaggio standard a testa piatta progettati per un ancoraggio affidabile su calcestruzzo, acciaio e muratura. View specifiche tecniche, dati sulle prestazioni e informazioni per gli ordini per varie applicazioni.
Preview DEWALT 0.300" Head Drive Pins Technical Guide and Specifications
Detailed technical guide for DEWALT 0.300" Head Drive Pins, covering product specifications, applications, performance data, load capacities in various base materials (concrete, steel, masonry), and ordering information. Includes approvals and guide specifications.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.