Naxa NHS-2012A

Naxa NHS-2012A 32-inch Wireless TV Sound Bar with Bluetooth User Manual

Model: NHS-2012A

Introduzione

This manual provides detailed instructions for the setup, operation, and maintenance of your Naxa NHS-2012A 32-inch Wireless TV Sound Bar with Bluetooth. Please read this manual thoroughly before using the product to ensure proper function and to maximize your listening experience.

Informazioni sulla sicurezza

Contenuto della confezione

Si prega di controllare la confezione per verificare la presenza dei seguenti elementi:

Prodotto finitoview

The Naxa NHS-2012A is a 32-inch sound bar designed to enhance your audio experience. It features Bluetooth and NFC connectivity for wireless audio streaming, as well as a 3.5mm AUX input for wired connections. The unit can be controlled via its integrated buttons or the included remote control.

Davanti view of the Naxa NHS-2012A 32-inch Wireless TV Sound Bar
Immagine: Frontale view of the Naxa NHS-2012A 32-inch Wireless TV Sound Bar. The sound bar is black with a speaker grille covering the front and control buttons located on the top center.

Controlli e connessioni

The sound bar features intuitive controls on the unit itself and a full-function remote control. Connection ports are typically located on the rear panel.

Impostare

Opzioni di posizionamento

The NHS-2012A sound bar offers flexible placement options:

Collegamento di potenza

  1. Connect the AC power adapter to the DC power input port on the sound bar.
  2. Collegare l'altra estremità dell'adattatore di alimentazione CA a una presa a muro standard.
  3. La soundbar entrerà in modalità standby.

Connessioni audio

Scegli uno dei seguenti metodi per collegare la tua sorgente audio:

1. Connessione Bluetooth

  1. Accendi la soundbar.
  2. Premere il tasto Modalità button on the sound bar or remote control until "BT" (Bluetooth) mode is selected. The Bluetooth indicator light will flash.
  3. Sul tuo smartphone, tablet o altro dispositivo abilitato Bluetooth, attiva il Bluetooth e cerca i dispositivi disponibili.
  4. Select "NHS-2012A" from the list of devices.
  5. Once paired, the Bluetooth indicator light will stop flashing and remain solid. You can now stream audio wirelessly.

2. NFC (Near Field Communication) Connection

If your device supports NFC, you can quickly pair it with the sound bar:

  1. Ensure the sound bar is powered on and in Bluetooth mode.
  2. Enable NFC on your smartphone or tablet.
  3. Tap your NFC-enabled device gently against the NFC area on the sound bar (refer to the product diagram for exact location, usually marked with an NFC logo).
  4. Conferma la richiesta di associazione sul tuo dispositivo.
  5. Una volta effettuata l'associazione, l'audio verrà trasmesso in streaming wireless.

3. Connessione AUX (3.5 mm)

  1. Connect one end of the included Aux to RCA cable (or a standard 3.5mm audio cable) to the 3.5mm AUX input port on the sound bar.
  2. Connect the other end of the cable to the audio output (headphone jack or AUX out) of your TV, computer, or other audio device.
  3. Accendi la soundbar.
  4. Premere il tasto Modalità button on the sound bar or remote control until "AUX" mode is selected.
  5. Riproduci l'audio dal tuo dispositivo connesso.

Istruzioni per l'uso

Accensione/spegnimento

Selecting Input Mode

Controllo del volume

Controlli di riproduzione Bluetooth

When in Bluetooth mode, use the remote control for the following functions:

Manutenzione

Pulizia

Magazzinaggio

Risoluzione dei problemi

ProblemaPossibile causaSoluzione
Nessun potereAdattatore di alimentazione non collegato o presa non funzionante.Assicurarsi che l'adattatore di alimentazione sia collegato saldamente alla soundbar e a una presa di corrente funzionante.
Nessun suonoIncorrect input mode selected; volume too low; audio cable not connected properly; Bluetooth not paired.
  • Premere il tasto Modalità pulsante per selezionare la sorgente di ingresso corretta.
  • Increase the volume on both the sound bar and the connected audio device.
  • For AUX connection, ensure the audio cable is fully inserted into both devices.
  • Per il Bluetooth, assicurati che il dispositivo sia associato e connesso.
L'associazione Bluetooth non riesceSoundbar non in modalità di associazione; dispositivo troppo lontano; interferenza.
  • Assicurarsi che la soundbar sia in modalità di associazione Bluetooth (indicatore lampeggiante).
  • Avvicina il tuo dispositivo Bluetooth alla soundbar.
  • Disattivare gli altri dispositivi Bluetooth nelle vicinanze per ridurre le interferenze.
  • Prova a disaccoppiare e riassociare il dispositivo.
Il telecomando non funzionaBatteries are dead or inserted incorrectly; obstruction between remote and sound bar; remote sensor blocked.
  • Replace the remote control batteries with new ones, ensuring correct polarity.
  • Remove any obstructions between the remote control and the sound bar.
  • Assicurarsi che il sensore remoto sulla soundbar non sia bloccato.

Specifiche

Nome del modelloNHS-2012A
Tipo di altoparlanteBarra audio
Dimensioni dell'altoparlante32 pollici
Potenza massima in uscita dell'altoparlante6 Watt (RMS)
Tecnologia di connettivitàBluetooth, NFC, 3.5mm AUX
Tecnologia di comunicazione wirelessBluetooth, NFC
Dispositivi compatibiliSmartphone, Tablet, TV, PC
Fonte di alimentazioneCorded Electric (AC 100-240V adapter)
Tipo di montaggioMontaggio a parete, da tavolo
ColoreNero lucido
Dimensioni del prodotto (L x P x A)36.25 x 4.25 x 4.2 pollici
Peso dell'articolo3.7 libbre
Codice UPC840005012970

Garanzia e supporto

For detailed warranty information, please refer to the warranty card included with your product or visit the official Naxa Electronics websito. Per supporto tecnico o richieste di assistenza clienti, contattare l'assistenza clienti Naxa tramite i canali ufficiali.

You can find more information and support resources on the Naxa websito: www.naxa.com