Introduzione
This manual provides essential instructions for the assembly, operation, and maintenance of your Mattel Hot Wheels Track Builder System Launcher, model FTV22. This accessory is designed to enhance your Hot Wheels track experience by providing a mechanism to launch vehicles. Please read all instructions carefully before use.
Impostare
Assembly is required for this product. Follow the steps below to set up your launcher accessory:
- Connettiti alla traccia: Ensure the launcher is securely connected to your existing Hot Wheels track system. The packaging indicates 'CONECTA' (CONNECT) for proper track attachment.
- Prepare the Launcher: As shown in image 'a' on the product packaging, pull back the launching mechanism until it locks into place. This action primes the launcher for use.
- Posiziona il veicolo: Position a Hot Wheels vehicle onto the track section immediately in front of the launcher.
Descrizione dell'immagine: The back of the product packaging for the Hot Wheels Track Builder System Launcher. This image illustrates the setup and operation. Section 'a' shows a hand pulling back the launcher mechanism, indicating the priming action. Section 'b' shows a hand pressing down on the launcher, demonstrating the release action. Other sections show track connection points and safety information.
Istruzioni per l'uso
Once the launcher is set up and a vehicle is in place, follow these steps to operate:
- Activate the Launcher: As depicted in image 'b' on the product packaging, firmly press down on the designated activation point of the launcher. This will release the mechanism and propel the Hot Wheels vehicle forward onto the track.
- Ripetere: To launch another vehicle, repeat the setup steps by pulling back the mechanism and placing a new vehicle.
This launcher is compatible with most Hot Wheels Track Sets and Hot Wheels Vehicles. Ensure vehicles are properly aligned for optimal launch performance.
Manutenzione
To ensure the longevity and proper function of your Hot Wheels Track Builder System Launcher, follow these simple maintenance guidelines:
- Pulizia: Wipe the accessory with a dry or slightly damp stoffa. Non utilizzare prodotti chimici aggressivi o detergenti abrasivi.
- Magazzinaggio: Store the launcher in a clean, dry place away from direct sunlight and extreme temperatures.
- Ispezione: Periodically inspect all parts for any signs of wear, damage, or loose connections. Discontinue use if any damage is found and replace if necessary.
Risoluzione dei problemi
If you encounter issues with your launcher, consider the following common solutions:
- Vehicle Not Launching: Ensure the launcher mechanism is fully pulled back and locked before attempting to launch. Verify the vehicle is correctly positioned on the track.
- Weak Launch: Check for any obstructions in the track or launcher path. Ensure the track connections are secure and stable.
- Problemi di connessione: If the launcher does not connect properly to other track pieces, ensure all connectors are clean and undamaged.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | FTV22 |
| Dimensioni del prodotto | Dimensioni: 5.5 x 17 x 27 cm |
| Peso dell'articolo | 70 grammi |
| Età consigliata dal produttore | 0 - 12 years (Note: Safety warnings advise 3+ years) |
| Materiale | Plastica |
| Fonte di alimentazione | Not motorized (Manual operation) |
| Componenti inclusi | Hot Wheels Vehicle Games (Launcher) |
| Assemblaggio richiesto | SÌ |
| Batterie richieste | NO |
| Obiettivo educativo | Spatial awareness |
| Caratteristiche speciali | Vehicle starter |
| Track Width | 32 millimetri |
| Opzioni di compatibilità | Hot Wheels Track Sets, Hot Wheels Vehicles |
| Tipo di controllo | Manual/Hand operation |
| Livello di abilità | Principiante |
Informazioni sulla sicurezza
AVVERTENZE:
- Toy not recommended for children under 3 years of age. May contain small parts that could cause choking if ingested by a child.
- STRANGULATION HAZARD: Not recommended for children under 3 years due to the cord that could cause asphyxiation if it strangles them.
- Plastic bags can be dangerous. To avoid suffocation, keep plastic bags away from babies and children.
- This product conforms to the safety standards of ASTM F963.
- Certified by INMETRO (CE-BR/INNAC-00128-18A NM 300/2002).
Informazioni sulla garanzia
Specific warranty details for the Mattel Hot Wheels Track Builder System Launcher FTV22 are not provided in this manual. Please refer to the manufacturer's official websito o contattare l'assistenza clienti per informazioni sulla garanzia.
Assistenza clienti
Per ulteriore assistenza, informazioni sul prodotto o per view other Hot Wheels products, please visit the official Mattel Hot Wheels websiti:
- Hot Wheels ufficiale Websito: hotwheels.com
- Costruttore di piste Hot Wheels Websito: hotwheels.com/trackbuilder
Produttore: Mattel