Feit Electric BR40 Dimmable LED Floodlight User Manual

Introduzione

Thank you for choosing the Feit Electric BR40 Dimmable LED Floodlight. This energy-efficient LED bulb is designed to replace traditional 75-watt incandescent floodlights, consuming only 11.8 watts while providing 1065 lumens of soft white 2700K light. It is suitable for various indoor applications, including track lighting and recessed fixtures, offering a wide 110-degree beam spread. With a lifespan of up to 15,000 hours, this ENERGY STAR qualified bulb is built for long-lasting performance and significant energy savings.

Immagine: Frontale view of the Feit Electric BR40 Dimmable LED Floodlight 2-pack packaging, highlighting its LED, dimmable, flood, 1065 lumens, 11.8 watts, 15,000 life hours, and 75W replacement features.

Informazioni sulla sicurezza

AVVERTIMENTO:

• Questo dispositivo è conforme alla Parte 15 delle Norme FCC. Il funzionamento è soggetto alle due condizioni seguenti: (1) Questo dispositivo non può causare interferenze dannose e (2) questo dispositivo deve accettare qualsiasi interferenza ricevuta, comprese le interferenze che possono causare un funzionamento indesiderato.
• This equipment has been tested and found to comply with the limits for a Class B digital device. It generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications.
• Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.

ATTENZIONE:

• Use only on 120 volt, 60Hz circuits.
• Adatto per damp posizioni.
• Minimum operating temperature: -25°C (-13°F).
• Questo dispositivo non è destinato all'uso con dispositivi di uscita di emergenza o luci di emergenza.
• Lamp may not be compatible with all dimmers. For dimmer compatibility information, visit www.feit.com or call 1-866-329-BULB.
• When installing or replacing, ensure that power is switched off at the circuit breaker before connecting or disconnecting to the fixture.

Immagine: Indietro view of the Feit Electric BR40 Dimmable LED Floodlight packaging, showing detailed specifications, warranty information, and safety warnings.

Configurazione e installazione

1. Spegni: Before beginning installation, ensure the power to the light fixture is switched off at the circuit breaker to prevent electrical shock.
2. Rimuovere la vecchia lampadina: Carefully unscrew and remove the existing bulb from the fixture. Allow the old bulb to cool if it has been recently in use.
3. Installare una nuova lampadina a LED: Screw the Feit Electric BR40 Dimmable LED Floodlight into the standard E26 medium screw base socket until it is finger-tight. Do not overtighten.
4. Ripristina alimentazione: Once the bulb is securely installed, restore power at the circuit breaker.
5. Applicazione: This BR40 floodlight is designed for track lighting and recessed applications, providing a wide beam of light.

Immagine: Lato view of the Feit Electric BR40 Dimmable LED Floodlight packaging, illustrating its wide light distribution and suitability for track and recessed applications.

Istruzioni per l'uso

The Feit Electric BR40 LED Floodlight is designed for simple operation in compatible fixtures.

• Operazione standard: Once installed and power is restored, the bulb will illuminate when the light switch is turned on.
• Funzionalità dimmerabile: This LED bulb is dimmable. For optimal performance and to avoid flickering or buzzing, use with LED-compatible dimmer switches. If you experience issues with your current dimmer, consult www.feit.com for a list of compatible dimmers or contact customer support.
• Uso interno: This bulb is intended for indoor use in dry or damp posizioni.

Manutenzione

Feit Electric LED bulbs require minimal maintenance due to their long lifespan and durable design.

• Pulizia: Assicurarsi che l'alimentazione sia spenta prima di pulire. Pulire la lampadina con un panno morbido e asciutto. Non utilizzare detergenti liquidi o materiali abrasivi.
• Sostituzione: Replace the bulb only after it has cooled down completely.
• Disposizione: Dispose of LED bulbs according to local regulations for electronic waste.

Risoluzione dei problemi

If you encounter issues with your Feit Electric BR40 LED Floodlight, consider the following:

• Lampadina non accesa:
  1. Assicurarsi che la lampadina sia avvitata saldamente nel portalampada.
  2. Check if the power switch is on and the circuit breaker has not tripped.
  3. Provare la lampadina in un apparecchio diverso, sicuramente funzionante.
• Sfarfallio o ronzio:
  1. This often indicates incompatibility with the dimmer switch. Ensure you are using an LED-compatible dimmer.
  2. Visita www.feit.com for a list of recommended dimmers or contact customer support.
• Radio or TV Interference:
  1. If the bulb causes interference, try reorienting or relocating the receiving antenna.
  2. Increase the separation between the light fixture and the affected receiver.
  3. Connect the light fixture to an outlet on a different circuit from the receiver.
  4. Consult a dealer or an experienced radio/TV technician for further assistance.

Specifiche

Garanzia e supporto

Garanzia: This Feit Electric LED lamp comes with a 5-year, free replacement warranty. If the product fails or you are not satisfied with its performance, please contact Feit Electric directly. This replacement is the sole remedy available, and liability for incidental or consequential damage is expressly excluded.

Informazioni sui contatti:

• Websito: www.feit.com
• E-mail: info@feit.com
• Numero verde: 1-866-329-BULB (1-866-329-2852)

Produttore:
Compagnia elettrica Feit
Pico Rivera, CA 90660
Made in China