1. Introduzione
The Brinno ATH2000 is an IPX5-rated weatherproof housing designed to protect your Brinno time-lapse camera from environmental elements and extend its operational battery life. This housing is suitable for long-term outdoor projects, providing enhanced durability and power supply for continuous recording.
2. Contenuto della confezione
Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:
- ATH2000 Housing Unit
- Camera Mounting Adapter
- Battery Slot (for 16 AA batteries)
- Extension Lens Cover (for Brinno BCS lenses)
- Confezione essiccante
- Cacciavite
- Adattatore USB-C
- Cinturino (x2)
3. Compatibilità
The Brinno ATH2000 Weatherproof Housing is compatible with the following Brinno time-lapse camera models:
- TLC2020
- TLC2000
- TLC200
- TLC200 Pro
- TLC120
- TLC130
4. Caratteristiche principali
- IPX5 Weather Resistance: Provides protection against water jets from any direction, making it suitable for outdoor use in various weather conditions including rain and snow.
- Durata prolungata della batteria: Accommodates up to 16 additional AA batteries, significantly extending the camera's operational time up to one year, depending on camera settings and usage.
- Compatibilità delle lenti: Includes an extension lens cover to allow the use of Brinno BCS lenses for specialized close-up or wide-angle shots.
- Montaggio regolabile: Features an adjustable camera mounting adapter to securely fit various compatible Brinno TLC cameras.
- External Device Access: Equipped with a cord hole for connecting external devices such as solar panels, further extending power options.
- Funzionalità di sicurezza: Includes eyelets for padlocks or other security devices to deter theft.
5. Montaggio e installazione
- Preparare la fotocamera: Ensure your Brinno time-lapse camera is configured with desired settings and has its internal batteries installed (if applicable).
- Install Additional Batteries: Open the battery slot module. Insert up to 16 AA batteries, ensuring correct polarity. Connect the power cable from the battery module to the camera's power input.
- Place Desiccant: Place the desiccant pack inside the housing to absorb moisture and prevent fogging.
- Montare la fotocamera: Attach your Brinno camera to the adjustable camera mounting adapter. Secure the adapter with the camera inside the ATH2000 housing. Ensure the camera lens aligns with the housing's lens opening.
- Attach Extension Lens Cover (Optional): If using a Brinno BCS lens, attach the extension lens cover to the housing's front opening.
- Close and Seal the Housing: Carefully close the housing, ensuring the rubber gasket is properly seated to maintain the IPX5 seal. Secure the latches firmly.
- Montare l'alloggiamento: Use the provided bungee cords or a compatible tripod/clamp (not included) with the housing's tripod socket to mount it in your desired location. Ensure the mounting is stable and secure.
6. Funzionamento
Once the camera is securely installed within the ATH2000 housing and powered, its operation is governed by the camera's own settings and controls. The housing primarily provides protection and extended power.
- Monitoraggio della batteria: Periodically check the camera's battery indicator (if available) or estimate remaining life based on your camera's power consumption and the 16 AA batteries.
- Potenza esterna: If using an external power source like a solar panel, ensure it is properly connected to the housing's cord hole and the camera's power input.
- Accesso alla fotocamera: To access the camera's controls, memory card, or internal batteries, you must unmount and open the ATH2000 housing.
7. Manutenzione
- Pulizia: Clean the exterior of the housing and the lens cover with a soft, damp cloth. Avoid abrasive cleaners that could scratch the surface or damage the seal.
- Sostituzione dell'essiccante: The desiccant pack absorbs moisture over time. Replace it periodically, especially in humid environments, to prevent internal fogging. The frequency depends on environmental conditions.
- Ispezione della tenuta: Regularly inspect the rubber gasket around the housing's opening for any signs of wear, cracks, or damage. A compromised gasket can lead to water ingress.
- Controllo della batteria: When replacing batteries, ensure no corrosion is present in the battery compartment. Clean any corrosion with a cotton swab and rubbing alcohol.
8. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Blurred or Smudged Images | Lens cover misalignment; internal fogging; dirty lens cover. | Ensure the camera lens is perfectly aligned with the housing's lens opening. Replace desiccant. Clean the exterior and interior of the lens cover. |
| La fotocamera non si accende | Dead batteries; incorrect battery installation; loose power connection. | Replace all AA batteries. Verify correct battery polarity. Check the power cable connection between the battery module and the camera. |
| Water Inside Housing | Improperly sealed housing; damaged gasket. | Ensure latches are fully secured and the housing is closed correctly. Inspect the rubber gasket for damage and replace if necessary. |
| Durata breve della batteria | Low quality batteries; extreme temperatures; camera settings. | Use high-quality alkaline or lithium AA batteries. Battery performance can decrease in cold weather. Review camera settings for optimal power consumption. |
9. Specifiche tecniche
| Specificazione | Dettaglio |
|---|---|
| Nome del modello | Brinno ATH2000 Outdoor Camera Housing Unit |
| Livello di resistenza all'acqua | IPX5 (impermeabile) |
| Materiale | Plastica |
| Colore | Nero |
| Dimensioni dell'articolo (P x L x A) | 7.09" x 6.3" x 5.12" (18 cm x 16 cm x 13 cm) |
| Peso dell'articolo | 454 grammi |
| Supporto batteria | 16 x AA batteries (for extended power) |
| Tipo di montaggio | Strap mount, Tripod socket |
| Dispositivi compatibili | TLC2020, TLC2000, TLC200, TLC200 Pro, TLC120, TLC130 |
10. Garanzia e supporto
The Brinno ATH2000 Weatherproof Housing comes with a Garanzia limitata del produttore di 1 anniLa presente garanzia copre i difetti di materiali e di fabbricazione in normali condizioni di utilizzo.
For warranty claims, technical support, or further assistance, please contact Brinno customer service or visit the official Brinno websito. Conserva la ricevuta d'acquisto come prova d'acquisto.
Produttore: Brinno Incorporated c/o Phase 3 Systems Corporation