REL Acoustics HT/1205 Subwoofer Instruction Manual

1. Introduzione e oltreview

The REL Acoustics HT/1205 is a high-performance home theater subwoofer engineered to deliver powerful and dynamic bass. It features a 500W Class D amplifier and a 12-inch (300mm) long-travel driver, designed for exceptional output in dedicated home theater environments. This subwoofer is also compatible with HT-Air Wireless for flexible placement options.

This manual provides essential information for the safe and optimal use of your HT/1205 subwoofer. Please read it thoroughly before setup and operation.

2. Caratteristiche del prodotto

• Amplificatore: Classe D da 500 W amplifier for high current and limitless dynamics.
• Autista: 12-inch (300mm) long-travel driver with a glass fiber base cone and a true carbon fiber center for stiffness and explosiveness.
• Progetto: Line-grained black composite finish with a high-gloss lacquer top panel, designed to dampen chassis resonances.
• Connettività: RCA inputs for LFE and low-level signals.
• Compatibilità senza fili: HT-Air Wireless compatible (optional) for zero-compression wireless audio transmission.
• Controlli: Intuitive, easy-to-use analog controls with double labeling for clear adjustments from any angle.

Figura 2.1: Fronte view of the HT/1205 Subwoofer, highlighting the 12-inch driver.

Figure 2.2: Rear panel of the HT/1205 Subwoofer with various controls and input/output options.

3. Istruzioni per l'installazione

3.1 Posizionamento

Optimal placement of the subwoofer is crucial for sound quality. Experiment with different locations in your room. Corner placement often provides the most output, while placement along a wall can offer a more balanced sound. Avoid placing the subwoofer directly in a cabinet or enclosed space, as this can negatively impact performance.

3.2 Connessione cablata

1. Prima di effettuare i collegamenti, assicurarsi che tutte le apparecchiature audio siano spente.
2. For LFE (Low-Frequency Effects) connection, use a single RCA cable from your AV receiver's LFE output to the LFE input on the HT/1205.
3. For low-level stereo connection, use two RCA cables from your pre-amplifier or receiver's stereo outputs to the LEFT and RIGHT LOW LEVEL inputs on the HT/1205.
4. Collegare il cavo di alimentazione al subwoofer e poi a una presa a muro.

3.3 Wireless Connection (HT-Air, optional)

If using the optional HT-Air Wireless system, refer to the HT-Air manual for specific pairing instructions. The HT-Air system allows for flexible placement without long cable runs, maintaining sound quality with zero compression.

4. Istruzioni per l'uso

4.1 Accensione/spegnimento

Locate the power switch on the rear panel. Set it to 'ON' to power on the subwoofer. The 'STATUS' indicator will illuminate. The subwoofer also features an 'AUTO' mode for automatic power on/off based on audio signal detection.

4.2 Regolazione dei controlli

• Fase: Adjust the phase control (0 or 180 degrees) to ensure the subwoofer's output is in phase with your main speakers. Listen for the most coherent and impactful bass.
• Incrocio: The 'CROSSOVER' knob sets the upper frequency limit of the subwoofer. Adjust this to blend seamlessly with your main speakers. Start with a lower setting and gradually increase until the bass sounds integrated, not boomy or disconnected.
• Livello: The 'LEVEL' knob controls the overall output volume of the subwoofer. Adjust this to achieve the desired bass intensity without overpowering the main speakers.

Make small adjustments to each control and listen carefully to the results. It may take some time to find the optimal settings for your room and system.

5. Manutenzione

• Pulizia: Per pulire il mobile, utilizzare un panno morbido e asciutto. Evitare detergenti abrasivi o solventi.
• Posizionamento: Ensure adequate ventilation around the subwoofer to prevent overheating. Do not block the rear panel or place it in direct sunlight.
• Gestione: When moving the subwoofer, always lift it carefully from the base. Avoid dropping or subjecting it to strong impacts.

6. Risoluzione Dei Problemi

• Nessun suono: Check power connections, ensure the subwoofer is powered on, and verify audio input cables are securely connected. Confirm the source device is playing audio and the receiver's subwoofer output is enabled.
• Suono distorto: Reduce the 'LEVEL' control. Check for loose connections or damaged cables. Ensure the subwoofer is not overdriven.
• Boomy or Uncontrolled Bass: Adjust the 'CROSSOVER' and 'LEVEL' controls. Experiment with subwoofer placement to reduce room modes.
• Lack of Bass Impact: Verify the 'PHASE' setting. Ensure the 'LEVEL' control is adequately set. Check if the LFE or low-level input is correctly configured on your receiver.

If issues persist, consult the REL Acoustics websito o contattare l'assistenza clienti.

7. Specifiche

Figure 7.1: Dimensions of the HT/1205 Subwoofer.

8. Garanzia e supporto

The REL Acoustics HT/1205 Subwoofer comes with a Limited Warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official REL Acoustics websito.

For technical support, service, or any inquiries not covered in this manual, please contact REL Acoustics customer support through their official website or authorized service centers. Ensure you have your product model number (HT1205) and proof of purchase available when seeking support.